Abstract:Hydrothermal liquefaction (HTL) of biomass with high moisture (e.g., algae, sludge, manure, and food waste) is a promising and sustainable approach to produce renewable energy (bio-oil) and protect the environment. However, the production of bio-oil with high yield and preferable properties such as low nitrogen content (N_oil) is time/labor-consuming using the traditional HTL experimental method. To this context, machine learning (ML) algorithms were employed to aid the bio-oil production with the consideration of related factors in HTL, including biochemical and elemental compositions of biomass, process parameters, and solvents. Results showed that the random forest (RF) algorithm was the best one (average R2 = 0.80) for the multi-task prediction of bio-oil yield (Yield_oil), N_oil, and energy recovery (ER_oil), hence employed for post feature interpretation and optimization. Feature importance indicates that both Yield_oil and ER_oil follow the trend of lipid content in biomass > temperature > retention time, while N_oil follows the trend of N content in biomass > temperature > retention time. Then ML-based optimization was conducted to guide the experimental research to produce bio-oil with high yield and low N content. The HTL experiment verification based on the optimal solutions from the ML-based Particle Swarm Optimization achieved the maximum Yield_oil (54.30%) and minimal N_oil (2.60%) from model biomass (composed of protein content 28%, lipid 48%, and carbohydrates 21%) at 300 °C and 30 min. The experiment verification was successful as the results were comparable to the modeling results, with errors of less than 7% for Yield_oil and ER_oil, and 23% for N_oil, and the N_oil of the experiment N_oil (2.60%) was interestingly lower than the modeled one (3.37%). This work provides new insight and strategy to accelerate the engineered HTL for desired bio-oil production.

Machine Learning Prediction of Nitrogen Heterocycles in Bio-Oil Produced from Hydrothermal Liquefaction of Biomass.

Machine learning aided bio-oil production with high energy recovery and low nitrogen content from hydrothermal liquefaction of biomass with experiment verification

Predicting Co-Liquefaction Bio-Oil of Sewage Sludge and Algal Biomass Via Machine Learning with Experimental Optimization: Focus on Yield, Nitrogen Content, and Energy Recovery Rate.

Two-step Machine Learning-Aided Two-Stage Hydrothermal Liquefaction of Biomass for Bio-Oil Upgrading to Lower Nitrogen Content: Experimental Verification and Parameter Optimization

Machine learning prediction and optimization of bio-oil production from hydrothermal liquefaction of algae

Prediction of Bio-oil Yield and Hydrogen Contents Based on Machine Learning Method: Effect of Biomass Compositions and Pyrolysis Conditions

Machine learning prediction of bio-oil production from the pyrolysis of lignocellulosic biomass: Recent advances and future perspectives

Machine learning models for fast and isothermal hydrothermal liquefaction of biomass: Comprehensive experiment and prediction of various product fraction yields

Machine Learning Aids Solvothermal Liquefaction of Algal Biomass: Prediction of Nitrogen Content and Bio-Oil Yield

Hydrothermal bio-oil yield and higher heating value of high moisture and lipid biomass: Machine learning modeling and feature response behavior analysis

Automated machine learning-aided prediction and interpretation of gaseous by-products from the hydrothermal liquefaction of biomass

Optimization of Phenyllactic Acid Biosynthesis and Separation by Machine Learning with Neural Network and Overlay Sampling Uniform Design

Machine learning prediction of the yield and oxygen content of bio-oil via biomass characteristics and pyrolysis conditions

Application of life cycle assessment and machine learning for the production and environmental sustainability assessment of hydrothermal bio-oil

Application of a hybrid mechanistic/machine learning model for prediction of nitrous oxide (N2O) production in a nitrifying sequencing batch reactor

Prediction of instantaneous yield of bio-oil in fluidized biomass pyrolysis using long short-term memory network based on computational fluid dynamics data

Machine learning for hydrothermal treatment of biomass: A review

Machine learning predicting wastewater properties of the aqueous phase derived from hydrothermal treatment of biomass

Optimization of hydrothermal liquefaction process through machine learning approach: process conditions and oil yield

Prediction of three-phase product distribution and bio-oil heating value of biomass fast pyrolysis based on machine learning

A Comparative Study of Machine Learning Methods for Bio-Oil Yield Prediction – A Genetic Algorithm-Based Features Selection