Abstract:This study set out to examine the unconventional use of raw oil shale (OS) as fine aggregate in concrete instead of its traditional utilisation as a pollutant energy source aiming to hinder the depletion of natural resources. Oil shale particles have been used to replace sand in concrete with 30 wt.-% and 50 wt.-% ratios. Part of the used OS particles was treated with silane prior to their addition in concrete. The fresh, mechanical, and durability properties, along with the micro-properties and surface chemistry of mixtures, were analysed by running the slump, compressive strength, permeability, scanning electron microscopy (SEM) and fourier transform infrared spectroscopy (FTIR) tests, respectively. Five concrete mixtures consisting of 30 samples with the size of 150 mm x 150 mm x 150 mm were prepared to serve the testing programme of the study. The results revealed the formation of a well-bonded interfacial transition zone between untreated OS particles and the cementitious matrix due to the presence of pozzolanic materials in OS. However, micro cracks and enlarged capillary pores were witnessed in treated OS mixtures along with a weak interfacial transition zone between the treated OS and the cementitious matrix. Moreover, the use of 30 wt.-% untreated OS reduced the water absorption of concrete by 9% (absorption rate of 9.5%), while other mixtures experienced an increase in their water absorption with a maximum increase of 42% when using 50 wt.-% treated OS (absorption rate of 10.7%). All mixtures attained a reduction in their compressive strength compared to control sample when employing treated and untreated OS in concrete, with a minimum reduction of 13% when using 30 wt.-% untreated OS (compressive strength of 26 MPa). The strength reduction in untreated OS mixtures is due to the formation of free CaO and free SiO2, which promote concrete expansion. The interference between silane and kerogen in OS was the main reason behind the strength reduction in treated OS mixtures. However, this reduction in mixtures’ strength is considered minimal, allowing for their potential use in different construction applications like rigid pavement.

Use of Oil Palm Shell As an Aggregate in Cement Concrete: A Review

Structural Behavior of Nanocoated Oil Palm Shell as Coarse Aggregate in Lightweight Concrete

Mechanical and Thermal Properties of Synthetic Polypropylene Fiber–Reinforced Renewable Oil Palm Shell Lightweight Concrete

A Review on The Compressive Strength and Workability of Concrete with Agricultural Waste Ash as Cement Replacement Material

THE EFFECT OF PALM OIL WASTE ON THE PROPERTIES OF GEOPOLYMER CONCRETE: A REVIEW

Mechanical Properties of Lightweight Aggregate Concrete Containing Unground Palm Oil Fuel Ash as Partial Sand Replaceme

SHEAR RESISTANCE OF OIL PALM SHELL REINFORCED CONCRETE BEAMS CAST WITH SHEAR REINFORCEMENT

Utilizing of oil shale ash as a construction material: A systematic review

Utilization of coconut shell as a supplementary cementitious material in concrete

Utilisation of raw oil shale as fine aggregate to replace natural sand in concrete: Microstructure, surface chemistry and macro properties

Effect of grinded oil shale inclusion on some properties of concrete mixtures

Strength Properties and Toughness Indices of Hybrid Polymeric Fibre Reinforced Renewable Oil Palm Shell Concrete

Systematic Evaluation of Permeability of Concrete Incorporating Coconut Shell as Replacement of Fine Aggregate

Promulgation of sustainable palm oil clinker sand in the development of structural and non‐structural lightweight foamed concrete

Influence of Palm Oil Fuel Ash on Mechanical Properties of Ultra-High-Performance Concrete

Performance of Palm Oil Clinker Lightweight Aggregate Concrete Comprising Spent Garnet as Fine Aggregate Replacement

Performance of sustainable lightweight foam concrete prepared using palm oil fuel ash as a sand replacement

A Systematic Literature Review on Waste-to-Resource Potential of Palm Oil Clinker for Sustainable Engineering and Environmental Applications

Investigation on the Properties of Concrete Containing Oil Shale Waste Ash as a Substitute for Cement

Study on the Durability of High-Content Oil Shale Concrete

Effect on Sulfuric Acid Resistance and Shrinkage of Concrete Incorporating Processed Bagasse Ash and Silica Fume