Abstract:The design and development of cost-effective and increased methanol permeable and proton-conductive membranes are critical concerns in the fabrication of polymeric electrolyte membranes (PEM). A solution-casting process was used to create a low-cost PEM based on sulfonated polyvinyl chloride (SPVC)-Polymethyl methacrylate (PMMA) blended with varying concentrations of Poly(sodium 4-styrenesulfonate) (PSS). The contact angle, oxidative stability, swelling ratio, water uptake, and methanol uptake of SPVC/PMMA/PSS membranes were investigated as a function of PSS molar ratio. FT-IR examination, 1 H NMR spectra, Raman spectroscopy, X-ray diffraction, thermogravimetric analysis (TGA), and scanning electron microscope micrographs were additionally utilized for confirming the chemical structure, morphology, and thermal stability of SPVC/PMMA/PSS membranes. Furthermore, the ion exchange capacity (IEC), proton conductivity, and methanol permeability of SPVC/PMMA/PSS membranes were investigated depending on the PSS concentration. The results showed a significant increase in proton conductivity from 1.80 × 10 –2 for SPVC/PMMA/1%PSS to 4.7 × 10 –2 S/cm for SPVC/PMMA/5%PSS at ambient temperature. On the other hand, the methanol permeability (P = 8.53 × 10 –8 cm 2 /s) was noticeably lower than that of Nafion 117 (3.39 × 10 –6 cm 2 /s). Additionally, the IEC of the manufactured membrane was 1.38 ± 0.7 meq g −1 for SPVC/PMMA/5%PSS compared to 0.91 meq g −1 for Nafion 117 membranes. The maximum water uptake of the synthesized membranes was 48.37 ± 2.27%, whereas Nafion 117 membrane absorption was 65.44%. According to conductivity studies and the membrane efficiency factor, the ideal PSS content in a polymer matrix is 4 wt.%. Finally, the developed SPVC/PMMA/PSS polyelectrolytic membranes show improvements in essential properties such as methanol permeability, proton conductivity, and IEC when combined with low-cost materials, making them an attractive contender as PEM for DMFCs.

Highly Effective Proton-Conductive Matrix-Mixed Membrane Based on a -So3h-functionalized Polyphosphazene.

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Facile construction of a highly proton-conductive matrix-mixed membrane based on a -SO3H functionalized polyamide

Highly Effective Proton-Conduction Matrix-Mixed Membrane Derived from an -SO3H Functionalized Polyamide

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

HT-PEMs Based on Nitrogen-Heterocycle Decorated Poly (arylene Ether Ketone) with Enhanced Proton Conductivity and Excellent Stability

Highly proton-conductive and low swelling polymeric membranes achieved by hydrophilic covalent cross-linking

Branched Sulfonimide-Based Proton Exchange Polymer Membranes from Poly(Phenylenebenzopheneone)s for Fuel Cell Applications

Phosphoric Acid Doped Composite Membranes from Poly (2,5-Benzimidazole) (ABPBI) and CsxH3−xPW12O40/CeO2 for the High Temperature PEMFC

Construction of three-dimensional proton-conduction networks with functionalized PU@PAN/UiO-66 nanofibers for proton exchange membranes

Investigation on sulfonated PVC/polymethyl methacrylate (PMMA)/polystyrene sulfonate (PSS) polymer blends as proton-conducting membrane

Adjusting structure-activity relationship to obtain hybrid proton exchange membrane with enhanced transport efficiency by introducing functionalized nano-coated MOFs

Preparation of proton exchange membrane with intrinsic micropores constructing efficient ion transport channels based on segmented copolymer (sulfonated polyimide)

Constructing proton transport channels in low phosphoric-acid doped polybenzimidazole membrane by introducing metal–organic frameworks containing phosphoric-acid groups

Enhanced proton conductivity assisted by sodium ions in the proton conductive hybrid membranes

Preparation and Properties of Poly(2,5-Benzimidazole)/Sulfonated Sepiolite Composite Proton Exchange Membrane