Abstract:In the process of production or use, micro defects (micro particles or pores) will be produced in the thin metal plate. The number and size of these micro defects determine the quality of the thin metal plate, affecting its service life and factor of safety.Therefore, quantitative and accurate characterization of micro defects is a necessary condition to ensure the quality and safety of thin metal plate products.This article studies the application of motion induced eddy current magnetic field testing in electromagnetic testing to detect defects in conductive and non magnetic materials.The simulation results show that when the lift off distance and the surface remanence of the permanent magnet are determined, the size of the permanent magnet is positively correlated with the amplitude of the defect detection signal.The main reason is that the amplitude of the defect detection signal is linearly related to the current density mode at various points on the defect motion path in the motion induced electric field without defects. Increasing the size of the permanent magnet can effectively improve the current density mode.As a continuation of the above results, an optimization method for excitation magnetic field in motion induced eddy current magnetic field detection has been proposed.The two types of permanent magnet arrays generated by this method generate larger amplitude defect detection signals compared to simple permanent magnets with the same volume and surface residual magnetism. The experimental results show that the excitation magnetic field arrangement designed by the above optimization method increases the signal amplitude by 80-90% compared to traditional methods.This optimization method helps to improve the sensitivity of motion induced eddy current magnetic field detection methods.

Coil Induced Eddy Current Analysis of a Fast Kicker Magnet

Finite Element Analysis of Gradient Z-Coil Induced Eddy Currents in a Permanent MRI Magnet

Characterization and Reduction of X-Gradient Induced Eddy Currents in A Ndfeb Magnetic Resonance Imaging Magnet-3d Finite Element Method-Based Numerical Studies

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

Design And Optimizations Of Solenoid Magnetic Structure For Inductive Power Transfer In Ev Applications

Model and Analysis of Eddy Current of Ferrite-dominated Kicker Magnet in Hefei Light Source Ring

Study of Pulse Magnetic Field Calculation of Kicker Magnet in HLS Storage Ring

THE EDDY-CURRENT EFFECTS OF A BENDING MAGNET ON AN ELECTRON STORAGE RING DURING SLOW ACCELERATION

Gene Regulation by Antisense DNA Produced in Vivo(*)

Commissioning, Performance, and Effect of the Quench Current-boosting Device on a Dedicated Superconducting Magnet

Coaxial Wire Measurements of Ferrite Kicker Magnets

Development of a High-repetition-rate Lumped-inductance Kicker Magnet Prototype for the Beam Switchyard of SHINE

Physical and Structural Design of Fast Extraction Kickers for CSNS/RCS

Analytic Modeling Optimal Control With Kinetic Inductance Fine Turning Method of Pulsed Power Supply for Accelerator Magnet

Eddy currents in accelerator magnets

INFLUENCE OF A U-SHAPED MAGNETIC CORE OF AN INDUCTOR WITH TWO COILS ON EDDY CURRENTS OF THIN-WALLED NON-MAGNETIC METAL PLATES IN PROCESS OF MAGNETO-PULSED TREATMENT

Design and Simulation of a Magnetization Drive Coil Based on the Helmholtz Principle and an Experimental Study

Prediction of Mechanical Behavior of the KSTAR CS Magnet Based on PF Coil Currents

Optimization Design Method for Excitation Magnetic Field in Motion Induced Eddy Current Magnetic Field Testing

Analytical Modelling and Calculation of Impedance and Pulsed Magnetic Field for Rectangular Meander Coil Based on Second Order Potential

3-D analysis of eddy current losses in permanent PMSM magnets