Experimental study on shock interaction control of double wedge in high-enthalpy hypersonic flow subject to plasma synthetic jet
XIE Xuzhen,LIU Qiang,ZHOU Yan,LUO Zhenbing,XIE Wei,BAI Guanghui,LUO Kai,WANG Qiu,WU Jianjun,Xuzhen XIE,Qiang LIU,Yan ZHOU,Zhenbing LUO,Wei XIE,Guanghui BAI,Kai LUO,Qiu WANG,Jianjun WU
DOI: https://doi.org/10.1016/j.cja.2024.01.008
IF: 5.7
2024-01-01
Chinese Journal of Aeronautics
Abstract:The hypersonic shock-shock interaction flow field at double-wedge geometries controlled by plasma synthetic jet actuator is experimentally studied in a Ma = 8 high-enthalpy shock tunnel with the purpose of exploring a novel technique for reducing surface heat flux in a real flight environment. The results demonstrate that increasing the discharge energy is advantageous in eliminating the shock wave, shifting the shock wave interaction point, and shortening the control response time. The oblique shock wave can be completely removed when the actuator's discharge energy grows from 0.4 J to 11.5 J, and the displacement of the shock wave interaction point increases by 124.56%, while the controlled response time is shortened by 30 μs. Besides, the reduction in diameter of the jet exit is firstly proved to have a negative impact on energy deposition in a working environment with incoming flow, which reduces the discharge energy and hence decreases the control effect. The shock wave control response time lengthens when the jet exits away from the second wedge. Along with comparing the change in wall heat flux at the second wedge over time, the control effect of plasma synthetic jet actuator with and without inflation is also analyzed. When plasma synthetic jet works in inflatable mode, both the ability to eliminate shock waves and the shifting effect of the shock wave interaction point are increased significantly, and the wall heat flux is also reduced.
engineering, aerospace