Abstract:Manganese oxides and carbon materials are both desirable catalysts for persulfate (PS) advanced oxidation processes in environmental remediation. Nevertheless, manganese oxides suffer from low reusability while carbon materials face the problem of limited catalytic efficiency. For the purpose of making full use of the advantages of the two materials as well as avoiding their shortcomings, carbon-coated Mn3O4 composites (Mn3O4/C) with a regular nanocube structure were designed to activate PS for the removal of organics, and the catalytic processes were deeply investigated. The catalyst prepared at 400 °C with a precursor ratio (glucose/KMnO4) of 0.5 exhibited the best catalytic performance along with satisfactory reusability owing to the protection of the outer carbon layer. According to experimental results and density functional theory calculation, there were van der Waals interaction and a part of the strong attraction between the interface of PS and Mn3O4/C, which could be enhanced by inner Mn3O4 and thus promoted the electron transfer between PS and carbon shell, and the defective edges of the carbon layer with hydroxyl (C–OH) groups could act as active sites for PS activation. Radical (SO4•–, •OH) and nonradical (1O2) oxidation processes both participated in the degradation of 2,4-dichlorophenol, in which •OH was dominating. This study not only proposed a promising catalyst for the degradation of pollutants but also expanded research ideas for future PS activation mechanism studies by integrating the experiment and simulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04049?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04049</a>.Experimental detection method and pseudo-first-order kinetics fitting model; XRD, SEM, nitrogen adsorption–desorption isotherms, FTIR spectrum, and XPS survey of the catalyst; TOC changes of 2,4-D; pseudo first-order kinetics fitting of the reaction; effects of PS and catalyst dosage; zeta potentials of 0.5-Mn3O4/C-T4; linear correlation results between pH and kobs; dynamic changes of solution pH with the low PS concentration; molecular structure of pollutants; degradation of 2,4-D by different carbon materials; cyclic voltammograms; optimized structures of models for DFT calculation; RDG isosurfaces of COH/PS; effects of MeOH and TBA on 2,4-D removal efficiency; decomposition of PS in the presence of NaN3; pore structure parameters of materials; and distance, bond length, and Bader charge in different structures (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04049/suppl_file/cs0c04049_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

In Situ Formation of MnO2/Ni(OH)2@nickel Foam with Porous Architecture for Triggering Persulfate-Based Advanced Oxidation Process

Heterogeneous Degradation of Orange II with Peroxymonosulfate Activated by Ordered Mesoporous MnFe2O4

Three-Dimensional Ni Foam-Supported CoO Nanoparticles/N-Doped Carbon Multilayer Nanocomposite Electrode for Oxygen Evolution

Nickel–manganese sulfide on nickel foam toward highly efficient and stable potassium periodate activation for organic pollutant degradation

In-situ Growth of Mn-Ni3S2 on Nickel Foam for Catalytic Ozonation of P-Nitrophenol

Stable Incorporation of MnOx Quantum Dots into N-doped Hollow Carbon: A Synergistic Peroxymonosulfate Activator for Enhanced Removal of Bisphenol A

Nanostructured Co3O4 grown on nickel foam: An efficient and readily recyclable 3D catalyst for heterogeneous peroxymonosulfate activation

Oxygen-defective MnO2−x Rattle-Type Microspheres Mediated Singlet Oxygen Oxidation of Organics by Peroxymonosulfate Activation

In situ growth of iron incorporated Ni3S2 nanosheet on nickel foam in mediating electron transfer to peroxymonosulfate for pollutant abatement

Enhancement of Photo-Fenton-like Degradation of Orange II by MnO2/NiO Nanocomposite with the Synergistic Effect from Bisulfite

Electron-rich ketone-based covalent organic frameworks supported nickel oxyhydroxide for highly efficient peroxymonosulfate activation and sulfadiazine removal: Performance and multi-path reaction mechanisms

Enhanced electron-transfer for peroxymonosulfate activation by Ni single sites adjacent to Ni nanoparticles

Polyphenol-mediated Interfacial Deposition Strategy for Supported Manganese Oxide Catalysts with Excellent Pollutant Degradation Performance

Co-doped cryptomelane-type manganese oxide in situ grown on a nickel foam substrate for high humidity ozone decomposition

In-situ Growth of Ni3S2@Mo2S3 Catalyst on Mo-Ni Foam for Degradation of P-Nitrophenol with a Good Synergetic Effect by Using Ozone

Dual strategies to construct electrospun NiCo 2 O 4 /boron-doped LaCoO 3 heterojunction catalysts to activate peroxymonosulfate for organic pollutant degradation

Unveiling Role of Sulfate Ion in Nickel‐Iron (oxy)Hydroxide with Enhanced Oxygen‐Evolving Performance

A persulfate oxidation system for removing acid orange from aqueous solution: Evaluation and degradation mechanism

Origin of the Enhanced Reusability and Electron Transfer of the Carbon-Coated Mn 3 O 4 Nanocube for Persulfate Activation

In-situ synthesis of self-standing cobalt-doped nickel sulfide nanoarray as a recyclable and integrated catalyst for peroxymonosulfate activation

One-step synthesis of Co x S/Ni 3 S 2 @NF on 3D nickel foam with different sulfur sources as a novel heterogeneous catalyst efficient activation of peroxymonosulfate in lomefloxacin degradation