Abstract:Converting industrial sludge into catalytic materials for water purification is a promising approach to simultaneously realize effective disposal of sludge and resource of water. However, manipulating the high efficiency remains a huge challenge due to the difficulty in the active sites control of the sludge. Herein, we proposed a constitutive modulation strategy by the combination of hydrothermal and pyrolysis (HTP) for the fabrication of defects-assistant Fe containing sludge-derived carbon catalysts on upgrading performance in peroxymonosulfate (PMS) activation for pollutant degradation. Adjustable defects on dyeing sludge-derived carbon catalysts (DSCC) were achieved by introducing oxygen or nitrogen functional precursors (hydroquinone or p -phenylenediamine) during hydrothermal processes and by further pyrolysis, where O was detrimental while N was beneficial to defect generation. Compared to the DSCC with less defects (DHSC-O), the defect-rich sample (DHSC-2N) exhibited superior catalytic performance of PMS activation for bisphenol A (BPA) elimination ( k = 0.45 min −1 , 2.52 times of DHSC-O), as well as 81.4% total organic carbon (TOC) removal. Meanwhile, the degradation capacity was verified in wide pH range (2.1–8.1) and various aqueous matrices, reflecting the excellent adaptability and anti-interference performance. Furthermore, the continuous-flow experiments on industrial wastewater showed synchronous BPA and chemical oxygen demand (COD) removal, implying great potential for practical application. Solid electron paramagnetic resonance (EPR) and 57 Fe Mösssbauer spectra analysis indicated that the defects acted as secondary active sites for Fe sites, which were beneficial to accelerating the electron transfer process. The only Fe active sites preferred the radical pathway. The controllable reaction tendency provides possibilities for the on-demand design of sludge-based catalysts to meet the requirements of practical wastewater treatment under Fenton-like reaction.

Spent Rather Than Pristine LiFePO4 Cathode Materials Can Catalytically Activate Sulfite for Organic Pollutants Decontamination

Spent LiFePO4: An old but vigorous peroxymonosulfate activator for degradation of organic pollutants in water

Preparation of Porous Silicate Supported Micro-Nano Zero-Valent Iron from Copper Slag and Used As Persulfate Activator for Removing Organic Contaminants.

Iron containing sludge-derived carbon towards efficient peroxymonosulfate activation: Active site synergy, performance and alternation mechanism

An Economic, Self-Supporting, Robust and Durable LiFe5O8 Anode for Sulfamethoxazole Degradation.

Efficient degradation of industrial pollutants with sulfur (IV) mediated by LiCoO2 cathode powders of spent lithium ion batteries: A “treating waste with waste” strategy

Reusing Sulfur-Poisoned Palladium Waste as a Highly Active, Nonradical Fenton-like Catalyst for Selective Degradation of Phenolic Pollutants

Enhanced cycling of Fe(III)/Fe(II) and mass transfer strategy for efficient and stable activation of peroxydisulfate for water decontamination via a flow-through Fe-MOFs cathode

FePO 4 activated sulfite autoxidation for simultaneous pollutant degradation and phosphorus release

Performance and mechanism of sulfite mediated oxidation of organic contaminants using iron(III) titanium oxide as catalyst

Anodic activation of persulfate by V-mediated Ti4O7: Improved stability and ROS generation

Waste polypropylene filter induced synthesis of pure phase Fe3O4 and ZVI incorporated carbon composite for non-radical peroxymonosulfate activation dominated sulfamethoxazole degradation: Singlet oxygen versus electron transfer process

Sulfur-containing iron nanocomposites confined in S/N co-doped carbon for catalytic peroxymonosulfate oxidation of organic pollutants: Low iron leaching, degradation mechanism and intermediates

Boosting Organics Degradation Via Sulfite Activation by Fe/Mn@CF Composite Electrode: Performance and Mechanism

Bio-porphyrin supported single-atom iron catalyst boosting peroxymonosulfate activation for pollutants degradation: A Singlet Oxygen-dominated nonradical pathway

A facile new process for the efficient conversion of spent LiFePO4 batteries via (NH4)2S2O8-assisted mechanochemical activation coupled with water leaching

Uniform N-coordinated single-atomic iron sites dispersed in porous carbon framework to activate PMS for efficient BPA degradation via high-valent iron-oxo species

ZnS-embedded porous carbon for peroxydisulfate activation: Enhanced electron transfer for bisphenol A degradation

WS2-cocatalyzed peroxymonosulfate activation via an enhanced Fe(III)/Fe(II) cycle toward efficient organic pollutant degradation

Graphite-N reinforced sludge biochar electrode: A experimental and DFT theoretical analysis of efficient evolution and in-situ utilization of H2O2

Electro-activating persulfate via biochar catalytic cathode for sulfamethazine degradation: Performance and mechanism insight