Abstract:The imperative reduction of carbon dioxide into valuable fuels stands as a crucial step in the transition towards a more sustainable energy system. Perovskite oxides, with their high compositional and property adjustability, emerge as promising catalysts for this purpose, whether employed independently or as a supporting matrix for other active metals. In this study, an A-site-deficient La0.9FeO3 perovskite underwent surface decoration with Ni, Cu or Ni + Cu via a citric acid-templated wet impregnation method. Following extensive characterization through XRD, N2 physisorption, H2-TPR, SEM-EDX, HAADF STEM-EDX mapping, CO2-TPD and XPS, the prepared powders underwent reduction under diluted H2 to yield metallic nanoparticles (NPs). The prepared catalysts were then evaluated for CO2 reduction in a CO2/H2 = 1/4 mixture. The deposition of Ni or Cu NPs on the perovskite support significantly enhanced the conversion of CO2, achieving a 50% conversion rate at 500 °C, albeit resulting in only CO as the final product. Notably, the catalyst featuring Ni-Cu co-deposition outperformed in the intermediate temperature range, exhibiting high selectivity for CH4 production around 350 °C. For this latter catalyst, a synergistic effect of the metal–support interaction was evidenced by H2-TPR and CO2-TPD experiments as well as a better nanoparticle dispersion. A remarkable stability in a 20 h time-span was also demonstrated for all catalysts, especially the one with Ni-Cu co-deposition.

Pt–Ni Alloy Nanobead Chains Catalysts Embedded in UiO-67 Membrane for Enhanced CO2 Conversion to CO

Pt3Co Octapods As Superior Catalysts of CO2 Hydrogenation

Cu–Ni Alloy Nanoparticles Anchored on Nitrogen-Doped Carbon Nanotubes for Efficient CO 2 Electroreduction to CO

Etching of Cubic Pd@Pt in UiO-66 to Obtain Nanocages for Enhancing CO2 Hydrogenation

UIO66-membranized SAPO-34 Pt catalyst for enhanced carbon dioxide conversion efficiency

Nickel Oxide/copper Nanocluster Anchored in Carbon-Nitride Nanosheets Realizing Ultrahigh Stability and Broad Potential Range for Zero-Gap Membrane Flow Reactor Towards CO2-into-CO Electroreduction

Preparation of PtNiCo Alloy/nitrogen-Doped Porous Carbon Composites and Their Electrocatalytic Properties

Low-Loading Sub-3 Nm PtCo Nanoparticles Supported on Co-N-C with Dual Effect for Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Nickel oxide/copper nanocluster anchored in carbon-nitride nanosheets realizing ultrahigh stability and broad potential range for zero-gap membrane flow reactor towards CO 2 -into-CO electroreduction

Pt nanoparticles supported on mesoporous carbon nanocomposites incorporated with Ni or Co nanoparticles for fuel cells

Noble Metal (pt, Au@Pd) Nanoparticles Supported on Metal Organic Framework (MOF-74) Nanoshuttles As High-Selectivity CO2 Conversion Catalysts

Perovskite Oxide Catalysts for Enhanced CO2 Reduction: Embroidering Surface Decoration with Ni and Cu Nanoparticles

PtCo Incorporated Porous Carbon Nanofiber As a Promising Oxygen Reduction Electrocatalyst

UIO<sub>66</sub>-membranized SAPO-34 Pt catalyst for enhanced carbon dioxide conversion efficiency

Ru/Ir Nanojunctions Supported on CNTs As Active and Ultrastable Catalysts for CO Preferential Oxidation Toward Hydrogen Purification

Pt3(CoNi) Ternary Intermetallic Nanoparticles Immobilized on N-Doped Carbon Derived from Zeolitic Imidazolate Frameworks for Oxygen Reduction

N-doped Carbon-Stabilized PtCo Nanoparticles Derived from Pt@ZIF-67： Highly Active and Durable Catalysts for Oxygen Reduction Reaction

Pt3Co/Co Composite Catalysts on Porous N-Doped Carbon Support Derived from ZIF-67 with Enhanced HER and ORR Activities.

Formate and CO* Radicals Intermediated Atmospheric CO 2 Conversion over Co-Ni Bimetallic Catalysts Assembled on Diatomite

Batch Preparation of PtCo/C for High-Performance Oxygen Reduction Reaction Based on a Continuous-Flow Microwave Pipeline Reactor

Ultrastable Nickel Single-Atom Catalysts with High Activity and Selectivity for Electrocatalytic CO2 Methanation