Abstract:Carbonaceous materials are among the most appropriate and widely used materials in the field of energy production, conversion, and storage. According to recent studies, biochar-based catalytic supports and adsorbents have shown great potential in the fields of energy production and the adsorption and storage of various gases due to their adjustable surface chemistry and porosity. In the present study, the pyrolysis of peanut shell to produce activated carbon as a precursor for catalyst support was investigated. Acid washing pretreatment was performed on raw biomass before pyrolysis to remove metals and impurities and reduce the ash content of the biomass. Before pyrolysis, thermogravimetric analysis was performed to determine the temperature range of biomass thermal decomposition. Pyrolysis was carried out at temperatures of 300, 400, and 500 °C to study the effect of pyrolysis temperature on biochar yield. KOH-activation on biochar was followed by subsequent pyrolysis at 650 °C to produce activated carbon. To study the effect of pyrolysis temperature and KOH activation on the structural and physiochemical characteristics of biochar, nitrogen adsorption/desorption and FTIR analyses were conducted. The pore size of the activated carbon surface changed from mesoporous to microporous with increasing the pyrolysis temperature and subsequent KOH activation, and the biochar specific surface area increased from 3.5 to 363.1 m 2 g -1 . In order to evaluate and optimize the operating conditions of the biochar and syngas production processes on larger scales, the integrated pyrolysis and gasification processes were simulated in Aspen Plus software. The effects of temperature, pressure, and air to biomass ratio on biochar production rate and H 2 /CO ratio were evaluated. A temperature of 650 °C, a pressure of 1 bar and an air to biomass ratio of 0.1 were selected as optimum operating conditions to simultaneously achieve maximum biochar production and maintain the quality of synthetic gas. The findings of the experimental and simulation sections of this study could provide a useful guide for the industrial-scale production of biochar and activated carbon as a catalytic support in various chemical production processes, as well as a water polutant adsorbent and gas adsorbent for various gas purification and storage processes.

Beneficial Use of Fe-impregnated Bentonite As a Catalyst for Pyrolysis of Grass Cut into Syngas, Bio-Oil and Biochar

Role of biochar-based catalysts in microwave-induced biomass pyrolysis: Structural properties and modification with Fe-series metals

Experimental and Simulation Study of Peanut Shell-derived Activated Carbon and Syngas Production via Integrated Pyrolysis-Gasification Technique

Impact of Bentonite Clay on In Situ Pyrolysis vs. Hydrothermal Carbonization of Avocado Pit Biomass

Ex Situ Catalytic Pyrolysis of Invasive Pennisetum purpureum Grass with Activated Carbon for Upgrading Bio-Oil

Production of an upgraded lignin-derived bio-oil using the clay catalysts of bentonite and olivine and the spent FCC in a bench-scale fixed bed pyrolyzer

Synergistic Effects of Fe@C Catalysts Prepared at Different Carbonization Temperatures on Microwave Co-Pyrolysis of Biomass and Plastic for High-Value Oil and Gas Production

Coal gasification fine slags: Investigation of the potential as both microwave adsorbers and catalysts in microwave-induced biomass pyrolysis applications

Preparation of Metal-Modified Carbon-Based Catalyst and Experimental Study on Catalytic Pyrolysis of Distillers Dried Grains with Solubles

Synergistic Effects of Catalyst Mixtures on Biomass Catalytic Pyrolysis

Synergistic effect of hydrogen atmosphere and biochar catalyst on tar decomposition and methane-rich gas production during biomass pyrolysis

Facile demineralization of biochar and its catalytic upgrading of bio-oil from fast pyrolysis of bagasse

Energy recovery and activation of biochar from kenaf, manure, and food waste via pyrolysis

Effect of Fe/Cu catalysts supported on zeolite/active carbon hybrid on bio-oil quality derived from catalytic pyrolysis of granular bacteria biomass

In-situ and Ex-Situ Selective Catalysis of Biochar-Based Catalysts for the Production of High-Quality Bio-Oil and H2-rich Gas from Tobacco Stem

Insight into the Ex Situ Catalytic Pyrolysis of Biomass over Char Supported Metals Catalyst: Syngas Production and Tar Decomposition

The Effects of Fe2O3 Catalyst on the Conversion of Organic Matter and Bio-Fuel Production During Pyrolysis of Sewage Sludge

Co-production of Biochar, Bio-Oil and Syngas from Halophyte Grass (achnatherum Splendens L.) under Three Different Pyrolysis Temperatures.

Pyrolysis Char Derived from Waste Peat for Catalytic Reforming of Tar Model Compound

Impact of biochar catalyst on pyrolysis of biomass of the same origin

In-situ bio-oil directional conversion mechanism of catalytic biomass pyrolysis over nitrogen-doped carbon preparation by grading of nitrogen-rich cow dung