Abstract:AC fault disturbance will lead to commutation failure (CF) of LCC-HVDC, which may threaten the security and stability operation of the sending and receiving AC systems. Previous studies have focused on the commutation failure of inverters caused by voltage sags caused by receiving-end AC system faults. Different from the previous studies, this paper comprehensively analyzes the commutation failure mechanism of the inverter caused by a three-phase symmetrical grounding fault at different HVDC sending terminals. Firstly, based on the actual HVDC transmission system parameters, a simulation model is established in the electromagnetic transient simulation platform Hypersim, and the phenomenon of inverter commutation failure caused by sending-end fault is simulated and verified. Secondly, different from the qualitative analysis method used in the past to explain the reasons for CF, the dominant factors that lead to inverter CF under different control modes are investigated by quantitative analysis. In the case of control mode 1, the main reason for CF is that the inverter commutation voltage drops beyond the critical value. In the case of control mode 2, the decrease of the inverter advance angle will increase the risk of inverter CF. At the same time, through the analysis of the relevant electrical quantities before CF, the excessive DC current in the system recovery stage is the root cause of the above phenomenon. On these bases, A control strategy is proposed to suppress the commutation failure caused by the fault at the sending end by adjusting the trigger angle of the rectifier. Electromagnetic transient simulation results show that the proposed control strategy can effectively inhibit CF.

Mechanism Analysis of Subsequent Commutation Failure Considering PLL Dynamics in LCC-HVDC Systems

A Recovery Method for HVDC Systems Following AC System Faults

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

Prevention Strategy for Subsequent Commutation Failure in LCC-HVDC System under Unbalanced Faults

A HVDC Subsequent Commutation Failure Mitigation Strategy Based on Modified Firing Angle Order by Firing Angle Measurements

A Novel Recovery Strategy to Suppress Subsequent Commutation Failure in an LCC-Based HVDC

Mechanism and Analysis of HCC to Suppress DC Commutation Failure

Commutation Overlap Characteristic Modeling and Stability Analysis of LCC-HVDC in Sending AC Grid

Analysis and suppression of LCC-HVDC inverter commutation failure caused by sending end faults

Impedance Characteristic Analysis and Phase-locked Angle Feedforward-based Stability Improvement for LCC-HVDC in Sending AC Grid

Improved Identification Method and Fault Current Limiting Strategy for Commutation Failure in LCC-HVDC

Commutation Failure Prediction for Multi-Infeed LCC-HVDC Systems Under Asymmetrical Faults

Commutation Failure Predictive Control Based on Fast AC Voltage Measurement in LCC-HVDC

A Fault Current Limiting Approach for Commutation Failure Prevention in LCC-HVDC Transmission Systems

Evaluation Approach and Controller Design Guidelines for Subsequent Commutation Failure in Hybrid Multi-Infeed HVDC System

Low-Frequency and Sub-Synchronous Power Oscillation Suppression and Analysis of Hybrid Line Commutated Converter for HVDC Grid

A Novel Inverter Topology on Mitigation of Commutation Failure in LCC-Based HVDC Systems

Commutation Failure analysis in single- and multi-infeed HVDC systems

Investigation of Cascaded Commutation Failures in Multiple LCC-HVdc Inverters Caused by Rectifier Side AC Grid Faults

Effectiveness Analysis of Evaluating Continuous Commutation Failure with Short Circuit Ratio

Current-limit control method to prevent subsequent commutation failure of LCC-HVDC based on adaptive trigger voltage