Abstract:Hydrogen fuel has the potential to mitigate the negative effects of greenhouse gases and climate change by neutralizing carbon emissions. Transporting large volume of hydrogen through pipelines needs hydrogen-specific infrastructure such as hydrogen pipelines and compressors, which can become an economic barrier. Thus, the idea of blending hydrogen into existing natural gas pipelines arises as a potential alternative for transporting hydrogen economically by using existing natural gas grids. However, there are several potential issues that must be considered when blending hydrogen into natural gas pipelines. Hydrogen has different physical and chemical properties from natural gas, including a smaller size and lighter weight, which require higher operating pressures to deliver the same amount of energy as natural gas. Additionally, hydrogen's small molecular size and lower ignition energy make it more likely to permeate through pipeline materials and seals, leading to degradation, and its wider flammability limits make it a safety hazard when leaks occur. In this study, we investigate these potential issues through simulation and technical surveys. We develop a gas hydraulic model to simulate the physical characteristics of a transmission and a distribution pipeline. This model is used throughout the study to visualize the potential impacts of switching from natural gas to hydrogen, and to investigate potential problems and solutions. Furthermore, we develop a Real-Time Transient Model (RTTM) to address the compatibility of current computational pipeline monitoring (CPM) based leak detection methods with blended hydrogen. Finally, we suggest the optimal hydrogen concentration for this model, and investigate the amount of carbon reduction that could be achieved, while considering the energy needs of the system.

Hydrate Phase Equilibrium of Hydrogen-Natural Gas Blends: Experimental Study and Thermodynamic Modeling

Numerical Investigation on Leakage and Diffusion Characteristics of Buried Hydrogen-Blended Natural Gas Pipelines

Experimental and modeling on hydrate phase equilibrium conditions for hydrogen-containing gas mixtures in pure water and brines

Kinetics of Methane Hydrate Formation in a 1200 Ml Unstirred Reactor for Natural Gas Storage

Influences of Hydrogen Blending on the Joule–Thomson Coefficient of Natural Gas

Insight into the effects of hydrogen on inside-valve flow and Joule-Thomson characteristics of hydrogen-blended natural gas: A numerical study

Effects of hydrogen blending on hydraulic and thermal characteristics of natural gas pipeline and pipe network

Analysis of Hydrogen Gas Injection at Various Compositions in an Existing Natural Gas Pipeline

Feasibility analysis of blending hydrogen into natural gas networks

Study of Vapor–hydrate Two-Phase Equilibria

Modeling on the phase equilibrium of gas hydrate in electrolytes containing system

Decompression modelling of natural gas-hydrogen mixtures using the Peng-Robinson equation of state

Phase Equilibria of Natural Gas Hydrates in Bulk Brine and Marine Sediments from the South China Sea

Vapor–Liquid Equilibrium for the Mixture Nitrogen (N2) + Methane (CH4) in the Temperature Range of (110 to 125) K

Influence of hydrogen blending on the operation of natural gas pipeline network considering the compressor power optimization

Thermodynamic ( p , ρ , T ) characterization of a reference high-calorific natural gas mixture when hydrogen is added up to 20 % (mol/mol)

Hydrate Phase Equilibria of Ternary Gas Mixtures with Tetrabutylammonium Bromide and Cyclopentane

Hydrogen embrittlement in hydrogen-blended natural gas transportation systems: A review

Vapor-hydrate phases equilibrium of (CH 4 +C 2 H 6 ) and (CH 4 +C 2 H 4 ) systems

Vapor-hydrate Phases Equilibrium of (CH4+C2H6) and (CH4+C2H4) Systems

Phase equilibria, volumetric properties, viscosity, and thermal conductivity of hydrogen binary mixtures containing methane, nitrogen, carbon monoxide, and carbon dioxide