Dielectric Anisotropy Effects on the Microwave-Induced Thermodynamic Response of Coal: Numerical Simulations and Experiments

Yixin Zhao,Yirui Gao,Zhuang Sun,Sen Gao,Chuncheng Sun

DOI: https://doi.org/10.1016/j.fuel.2022.125038

IF: 7.4

2022-01-01

Fuel

Abstract:Microwave heating technology is a promising solution in underground engineering, such as mining, coalbed methane extraction, and oil/gas production, that primarily depends on the conversion of microwave energy due to dielectric properties. However, inadequate understanding of the effects of dielectric properties on microwave irradiation limits further development of microwave techniques. In this study, based on the dielectric anisotropy of coal, an electromagnetic-thermomechanical coupled model was used to numerically investigate the thermodynamic response under microwave irradiation at 2.45 GHz and 1 kW for 180 s. We performed experimental verification via indoor test. Results show that the sensitivity of microwaves to the dielectric direction in the TE10 mode is x > z > y. In different dielectric anisotropy models, the temperature and maximum principal stress increase synchronously and linearly with increasing heating time, and the curve growth rate is positively correlated with the equivalent dielectric permittivity. There are also marked temperature and stress concentrations in the sample. The compressive stress is concentrated in the center of the sample, while the tensile stress is around the outer edge. For bedding coal, tensile fractures occur under microwave irradiation along the bedding, and shear fractures run through the bedding. With the increase of the input microwave energy, the failure mode of coal gradually expands from single fracture to fracture network.