Abstract:The stability of perovskite solar cells under operation is a critical challenging issue, especially under extreme temperatures or temperature variations. Perovskite solar cells have been reported to retain the initial efficiency over just 200–300 thermal cycles between –40 to 85 °C — the standard testing protocol for thermal cycling. The rapid degradation has been largely attributed to mechanical residual stresses within the multilayer device stacks. Most studies have focussed on stress relief by improving the interfaces in the devices, which are known to be prone to delamination, or the cell's encapsulation. Less attention has been paid to the perovskite layer. Now, Min Chen, Joseph Luther and colleagues across the United States and Switzerland show that the minimization of residual strain in the perovskite affords better stability against thermal cycling stresses. The researchers add an alkyl ammonium additive — n -octylammonium iodide — into the perovskite precursor solution. Upon annealing, the ammonium molecules distribute at grain boundaries and interfaces, suppressing residual tensile strain in the perovskite film. This translates into solar cells with improved stability against thermal cycling. The initial efficiency is retained over 500 cycles, when the time to complete each cycle is 6 hours, and over 2,500 cycles in accelerated tests in which each cycle lasts 5 minutes. The research team shows that stability is enhanced for different device designs and both in cells and modules, confirming the reproducibility of the approach. By analysing the devices after the stressing test, Chen et al. demonstrate that the perovskite film with reduced tensile strain has fewer cracks and is less prone to delamination, ensuring more stable devices. Future work can build on stress engineering of the perovskite film and other existing strategies for interfaces and encapsulation to further improve the stability of perovskite solar cells against thermal stresses.

Residual Strain Reduction Leads to Efficiency and Operational Stability Improvements in Flexible Perovskite Solar Cells

Interfacial Residual Stress Relaxation in Perovskite Solar Cells with Improved Stability

Realizing 23.9% Flexible Perovskite Solar Cells via Alleviating the Residual Strain Induced by Delayed Heat Transfer

Impact of Strain Relaxation on 2D Ruddlesden–Popper Perovskite Solar Cells

Efficient and Stable of Perovskite Solar Cells

Strain Effects on Flexible Perovskite Solar Cells

Inhibited Crack Development by Compressive Strain in Perovskite Solar Cells with Improved Mechanical Stability

Strain Engineering in Perovskite Solar Cells and Its Impacts on Carrier Dynamics

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Regulating Compressive Strain Enables High‐Performance Tin‐Based Perovskite Solar Cells

Improved Interfacial Adhesion for Stable Flexible Inverted Perovskite Solar Cells

Ameliorating the Interfacial Mismatch of SnO2 and Perovskite Enabling High Mechanical Stability for Flexible Perovskite Solar Cells

In situ crosslinking-assisted perovskite grain growth for mechanically robust flexible perovskite solar cells with 23.4% efficiency

The interfacial embedding of halogen-terminated carbon dots produces highly efficient and stable flexible perovskite solar cells

Strain release of formamidinium-cesium perovskite with imprint-assisted organic ammonium halide compensation for efficient and stable solar cells

Strain-free hybrid perovskite films based on molecular buffer interface for efficient solar cells

Highly Efficient and Stable Wide-Bandgap Perovskite Solar Cells Via Strain Management

Regulating strain in perovskite thin films through charge-transport layers

Relieving stress for stability

Strain regulates the photovoltaic performance of thick-film perovskites

Surface Reconstruction for Efficient and Stable Monolithic Perovskite/Silicon Tandem Solar Cells with Greatly Suppressed Residual Strain