Abstract:The lithium metal anode (LMA) is considered the most promising anode material due to its high specific capacity and low electrode potential.The energy density is doubled by replacing the graphite anode in a lithium-ion battery with LMA. However, the formation of an unstable solid electrolyte interphase (SEI) and dendrite growth of LMA limit the practical applications of lithium metal batteries. A well-formed SEI can effectively passivate the lithium metal surface, preventing further reactions between LMA and electrolyte. However, the mechanical stability of the SEI formed in a general electrolyte is poor. The SEI ruptures due to the violent expansion and contraction of the LMA, resulting in continuous electrolyte consumption. Meanwhile, the inhomogeneous deposition of lithium metal can cause severe dendrite growth. Lithium dendrites have a high specific surface area, which increases active lithium and electrolyte consumption. Once the lithium dendrites pierce the separator, safety issues arise. Furthermore, the inhomogeneous stripping behavior of lithium metal can cause partially active lithium to lose its conductive connection with the substrate, resulting in a loss of reversible capacity. This results in lower coulombic efficiency and shorter cycle life for LMA. During the platting/stripping process, lithium ions first pass through the SEI. Therefore, the composition and structural distribution of the SEI have a decisive effect on the deposition/dissolution behavior of lithium. Understanding the composition and structure of SEI is crucial for solving the historical challenges of LMA. In recent years, researchers have made significant progress towords understanding SEI through advanced characterization and analysis tools, such as cryo-electron microscopy, titration gas chromatography, atomic force microscopy, and nuclear magnetic resonance. However, the conventional experimental methods developed so far have considerable spatial and temporal resolution limitations. It is difficult to understand the interfacial reaction mechanism and the effect of interfacial composition on ion transport using a single experimental method. A combination of experiments and theoretical calculations, such as density functional theory, can simulate the interfacial reaction and help understand the mechanism of interface formation. Molecular dynamics simulation can be used to predict the interfacial lithium-ion transport paths. The experimental process can be simplified using machine learning to screen the experimental design. In the future, the close integration of theoretical calculations and experiments will be a major driving force for developing high energy density lithium metal batteries. This review summarizes the characterization techniques and regulation strategies of SEI, such as electrolyte optimization design, artificial SEI, and current collector design. Among them, we focused on the electrolyte composition design, the most direct and efficient means. By changing the composition and ratio of the electrolyte, the interfacial reaction process can be directly affected to form a stable SEI, which inhibits the continuous consumption of active lithium and the growth of dendrites. Simultaneously, we introduced the current state of interphase research in lithium metal pouch cells. This review has a certain guiding significance for LMA toward practical applications.

From Mosaic-Type to Heterojunction-Type SEI Films on the Li Anode: Decoupling Chemical and Electrochemical Degradation of the Electrolyte

Artificial Solid Electrolyte Interphase to Address the Electrochemical Degradation of Silicon Electrodes

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Artificial SEI Film via Synchronous Reaction‐Diffusion‐Assembly on Li Liquid Metal

Structural Insights into Solid Electrolyte Interphase (SEI) on Lithium Metal Anode: from Design Strategies to the Stability Evaluation

Unravelling the convoluted and dynamic interphasial mechanisms on Li metal anodes

Achievement of high-cyclability and high-voltage Li-metal batteries by heterogeneous SEI film with internal ionic conductivity/external electronic insulativity hybrid structure

Multiscale Observations of Inhomogeneous Bilayer SEI Film on a Conversion‐Alloying SnO2 Anode

Understanding and Modifying Strategies for Lithium Metal Anode Solid Electrolyte Interphase

Multiscale Observations of Inhomogeneous Bilayer SEI Film on a Conversion‐Alloying SnO 2 Anode

Operando Observations of SEI Film Evolution by Mass‐Sensitive Scanning Transmission Electron Microscopy

Visualizing and Regulating Dynamic Evolution of Interfacial Electrolyte Configuration during De‐solvation Process on Lithium‐Metal Anode

A Dual-Layered Artificial Solid Electrolyte Interphase Formed by Controlled Electrochemical Reduction of LiTFSI/DME-LiNO3 for Dendrite-Free Lithium Metal Anode

Theoretical Calculation Study on the Electrochemical Properties of Lithium Halide-Based Artificial SEI Films for Lithium Metal Anodes

Insight on lithium metal anode interphasial chemistry: Reduction mechanism of cyclic ether solvent and SEI film formation

Study on modification and failure of precast solid electrolyte interface film on Li metal anodes

Interface Engineering for Lithium Metal Anodes in Liquid Electrolyte

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

Solid Electrolyte Interphase on Lithium Metal Anodes.

Role of Inorganic Surface Layer on Solid Electrolyte Interphase Evolution at Li-Metal Anodes