Abstract:Shape-memory polymers (SMP) composites have attracted significant attention from both industrial and academic researchers due to their useful and fascinating functionality. Generally, SMP can be actuated by heat, electricity, water and chemicals. A large amount of work has been done on the shape recovery of shape memory polymers blended with conductive filler triggered by electrical resistive heating. However, the conductive filler will dramatically undermine the shape memory behavior and there is no effective way to increase the conductivity without compromise on the shape memory behavior. In this work, carbon nanofiber (CNF) paper and bucky paper were introduced to actuate shape memory polymer, respectively. The shape recovery of polymer was carried out by electrical resistive heating generated by CNF paper and bucky paper which were attached to the surface of the SMP composites. Also, both of them possess excellent heat conductive properties which can serve as a conductive layer to transmit heat through the polymer. It was found that using this kind of structure the recoverability approximated to 100%. In addition, the geometry position in the composites of both types of paper was optimized to acquire the most efficient heat transfer rate from the paper to the SMP. After that, the structures of both CNF paper and bucky paper have been characterized by scanning electronic microscopy. Also, the electrical volume resistivity of the nanocomposite incorporated with different volume fractions of carbon nanofiber paper was measured by four-point probe method. The shape recovery process of the composites driven by resistive heating was recorded. The thermo-mechanical properties of the nanocomposites with respect to various volume fractions of carbon nanofiber paper were analyzed by dynamic mechanical analysis (DMA).

A Hybrid Shape Memory Polymer Filled Metallic Foam Composite: Shape Restoring, Strain Sensing, Joule Heating, Strengthening, and Toughening

High-Performance Multifunctional Shape Memory Epoxy with Hybrid Graphene Oxide and Carbon Nanotube Reinforcement

Highly Sensitive Large Strain Cellulose/multiwalled Carbon Nanotubes (mwcnts)/thermoplastic Polyurethane (TPU) Nanocomposite Foams: from Design to Performance Evaluation

Hybrid Auxetic Foam and Perforated Plate Composites for Human Body Support

Carbon Fiber Reinforced Shape Memory Epoxy Composites with Superior Mechanical Performances

Sensing and Actuating Capabilities of A Shape Memory Polymer Composite Integrated with Hybrid Filler

Conductive Shape Memory Polymer Composite Incorporated with Hybrid Fillers: Electrical, Mechanical, and Shape Memory Properties

An Electrical-Heating and Self-Sensing Shape Memory Polymer Composite Incorporated with Carbon Fiber Felt

Analysis of Shape Memory Behavior and Mechanical Properties of Shape Memory Polymer Composites Using Thermal Conductive Fillers

Synergistic Effect Enhanced Shape Recovery Behavior of Metal-4D Printed Shape Memory Polymer Hybrid Composites

Shape memory polymer foam: active deformation, simulation and validation of space environment

Design and Preparation of Shape Memory Phenol–formaldehyde Foam Composites with Excellent Thermal Stability and Mechanical Properties

Shape Memory Effect and Thermomechanical Properties of Shape Memory Polymer Fabric Composite in Tension Mode

Shape Memory Polymer Carbon Nanocomposites; Based on Carbon Nanopaper

Shape-morphing composites with designed micro-architectures

Investigation of Mechanical and Conductive Properties of Shape Memory Polymer Composite (Smpc)

Mechanical behaviors and applications of shape memory polymer and its composites

Electro-Induced Shape Memory Properties of Short Carbon Fiber Reinforced Composite Structure

Mechanical Properties and Shape Memory Effect of Short Fiber Reinforced Smp Composite

Thermomechanical Properties And Deformation Behavior Of A Unidirectional Carbon-Fiber-Reinforced Shape Memory Polymer Composite Laminate

A Thermoset Shape Memory Polymer-Based Syntactic Foam with Flame Retardancy and 3D Printability.