Abstract:AZ31B Mg/5052 Al laminated composite sheet with superior mechanical property and good sheet shape was fabricated by novel corrugated roll/flat roll corrugating rolling and flat roll/flat roll flat rolling (CFR) at elevated temperatures. The microstructural evolution and mechanical behavior variation of the composite sheet under CFR hot rolling condition were investigated by experimental and numerical simulation methods. The results show that first-pass corrugated rolling induces relatively high and inhomogeneous shear strain in the Mg side and various corrugated interface positions at a low reduction of 35%. It leads to significant grain refinement, outstanding basal texture modification as well as tensile twin activation Mg alloy, which perfectly coordinates the plastic deformation between hard-to-deform Mg and ductile Al and achieve the strong interface metallurgy bonding in Mg/Al sheet and also significantly improves the mechanical properties of Mg/Al composite sheet. The annealing before second-pass flat rolling causes the pronounced static recrystallization and grain growth of Mg alloy in corrugated-rolling Mg/Al sheet, and the formation of similar to 25 mu m thick interfacial compound layer consisted of Mg17Al12 and Al3Mg2 two sublayers. Second-pass flat rolling with a reduction of 30% further imposes severe inhomogeneous shear deformation on the composite sheet, which results in the formation of a wave-shape three-dimensional bonding interface, and the interface compound layers cracking at peak and waist interface positions or fragmenting into well-aligned discrete particles to the bonding interface, in addition to substantial matrix microstructure refinement, texture modification and twin activation in Mg alloy. Such interface structure greatly enhances the interface bonding force of the Mg/Al composite sheet by the larger interface contact area, mechanical gearing effect as well as particle pinning effect. Hence the significant microstructural refinement, strong interface bonding and low residual stress induced by CFR process account for the excellent performance of the Mg/Al laminated composite sheet.

Investigation on Microstructure, Mechanical Properties and Fracture Mechanism of Mg/Al Laminated Composites

Microstructures and Mechanical Properties of Mg/Mg and Mg/Al/Mg Laminated Composites Prepared Via Warm Roll Bonding

Microstructure and Mechanical Properties of Mg/Al Laminated Composite: the Effect of Transition Layer Thickness

Microstructural Evolution and Mechanical Behavior of Mg/Al Laminated Composite Sheet by Novel Corrugated Rolling and Flat Rolling

Microstructure and mechanical behavior of Mg/Al composite plates with different thicknesses of Ti foil interlayer

Microstructure and mechanical behavior of Mg ZK60/Al 1100 composite plates fabricated by co-extrusion

An integrated computational and experimental study of the failure mode in Mg/Al laminated composite under three-point bending

Study on Microstructure and Tensile Property of Sub-micron MgAl2O4(p)Al-Mg-Si Composite

Preliminary Investigations on the Mg–Al–Zn/Al Laminated Composite Fabricated by Equal Channel Angular Extrusion

Microstructure and Mechanical Properties of the Mg/Al Laminated Composite Fabricated by Accumulative Roll Bonding (Arb)

Effect of Rolling Parameters on Microstructure, Texture, and Mechanical Properties of Al/Mg/Al Laminated Composites

Microstructure and mechanical properties of Mg–4Al–4Nd–0.5Zn–0.3Mn alloy

Interfacial fracture characteristics of Mg/Al composite plates with different thickness ratios by asymmetrical rolling with differential temperature rolls

Synergistic Mechanism of Strengthening and Toughening of Tissue Regulation Response to Mg/Al Composite Laminates by Hard Plate Accumulative Roll Bonding

Effect of Annealing Parameters on the Interfacial Structures and Mechanical Properties of Al/Mg/Al Laminates with Large Thickness Ratio

Effect of Annealing Temperature on the Microstructure and Mechanical Properties of the Al/Mg–8Li–3Al–1Zn/Al Composite Plates Fabricated by Hot Rolling

The mechanical properties and formation mechanism of Al/Mg composite interface prepared by spark plasma sintering under different sintering pressures

Preparation of 2024-Al/az31-mg Laminated Composite by Powder Metallurgy Integrated Forming and Sintering

Microstructure and Diffusion Behaviors of the Diffusion Bonded Mg/Al Joint

Effect of Mg Content on the Mechanical Properties and Microstructure of Gr(F)/Al Composite

Influence of Mesostructure on Mechanical Property of Laminated Ti–Al Composites