High-performance perovskite photodetectors based on CsPbBr3 microwire arrays (vol 60, pg 8896, 2021)

Li Ren,Kunpeng Gao,Qiuhong Tan,Chen Qing,Qianjin Wang,Peizhi Yang,Yingkai Liu

DOI: https://doi.org/10.1364/AO.467489

IF: 1.9

2022-01-01

Applied Optics

Abstract:We correct two errors in our publication [Appl. Opt.60, 8896 (2021)APOPAI0003-693510.1364/AO.437478].

What problem does this paper attempt to address?

High-performance Perovskite Photodetectors Based on CsPbBr3 Microwire Arrays: Erratum.

Li Ren,Kunpeng Gao,Qiuhong Tan,Chen Qing,Qianjin Wang,Peizhi Yang,Yingkai Liu

DOI: https://doi.org/10.1364/ao.467489

IF: 1.9

2022-01-01

Applied Optics

Abstract:We correct two errors in our publication [Appl. Opt.60, 8896 (2021)APOPAI0003-693510.1364/AO.437478].
High-performance Perovskite Photodetectors Based on CsPbBr3 Microwire Arrays.

Li Ren,Kunpeng Gao,Qiuhong Tan,Chen Qing,Qianjin Wang,Peizhi Yang,Yingkai Liu

DOI: https://doi.org/10.1364/ao.437478

IF: 1.9

2021-01-01

Applied Optics

Abstract:All inorganic perovskite materials have drawn extensive attention, owing to their outstanding performance, facile solution-processed method, and potential applications in optoelectronic devices. However, uncontrollable morphology, high defect density, and instability of perovskites prepared via solution-processed method are the main challenges for their large-scale production and commercialization. Herein, we prepared large-scale CsPbBr3 microwire arrays with highly ordered morphology and high crystalline quality by a template-assisted method. The photodetectors based on CsPbBr3 microwire arrays exhibited remarkable on/off photocurrent ratio of 9.02×103, high detectivity of 1.59×1013 Jones, high responsivity of 4.55 A/W, and fast response speed of 4.9/3 ms. More importantly, the photocurrent of the photodetectors hardly changed in air after being stored for two months, indicating remarkable stability. This study demonstrates that CsPbBr3 microwire arrays provide the possibility for preparing large-scale and high-performance optoelectronic devices.
Correction: Lanthanide ion doping enabling highly sensitive and stable all-inorganic CsPbI2Br perovskite photodetectors

Zhiyuan Fang,Nan Ding,Wen Xu,Tianyuan Wang,Yue Wang,Lu Zi,Junhua Hu,Siyu Lu,Donglei Zhou,Xue Bai,Hongwei Song

DOI: https://doi.org/10.1039/d3tc90071a

IF: 6.4

2023-04-16

Journal of Materials Chemistry C

Abstract:Correction for 'Lanthanide ion doping enabling highly sensitive and stable all-inorganic CsPbI 2 Br perovskite photodetectors' by Zhiyuan Fang et al. , J. Mater. Chem. C , 2023, 11 , 4049–4055, https://doi.org/10.1039/D2TC05543K.

materials science, multidisciplinary,physics, applied
A high performance CsPbBr3 microwire based photodetector boosted by coupling plasmonic and piezo-phototronic effects

Zheng Yang,Mingming Jiang,Linjuan Guo,Guofeng Hu,Yansong Gu,Jianguo Xi,Zhihao Huo,Fangtao Li,Shufang Wang,Caofeng Pan

DOI: https://doi.org/10.1016/j.nanoen.2021.105951

IF: 17.6

2021-07-01

Nano Energy

Abstract:Lead halide perovskites have attracted much attention in photodetector fabrication. Up to now, several strategies have been used to modulate the device performance. Here, P3HT-CsPbBr3 monocrystalline microwires based photodetectors are demonstrated by coupling LSPR and piezo-phototronic effects. The photocurrent, response speed and recovery speed under 532 nm laser illumination were increased to nearly 3.5, 70 and 8.4 times when decorated with Au NCs and applied with a compressive strain of -0.29%, respectively. The enhancement of performances can be attributed to the increased light absorption caused by LSPR effect and the enhanced separation of photo-generated holes at the heterojunction interface caused by piezo-phototronic effect. This work suggests that all-inorganic perovskites CsPbBr3 based photodetectors can be significantly enhanced by coupling plasmonic and piezo-phototronic effects. This strategy can be used to modulate the performance of optoelectronic devices based on other piezoelectric materials.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
High-Performance Photodetectors Based on Single All-Inorganic CsPbBr3 Perovskite Microwire

Pengbin Gui,Zhao Chen,Borui Li,Fang Yao,Xiaolu Zheng,Qianqian Lin,Guojia Fang

DOI: https://doi.org/10.1021/acsphotonics.7b01567

IF: 7

2018-01-01

ACS Photonics

Abstract:In recent years, hybrid organic–inorganic perovskites have emerged as promising photosensing materials for next-generation solution-processed photodetectors, achieving high responsivity, fast speed, and large linear dynamic range. In particular, perovskite photoresistors possess low-cost fabrication and easy integration with low dimensional structures. However, a relatively large dark current is still limiting the further development of perovskite photoresistors. Herein, we introduce full-inorganic perovskite polycrystalline microwires for high-performance photodetection, in order to enhance the device stability. Furthermore, dark current and noise can be effectively suppressed by tuning the contacts. All-inorganic CsPbBr3 microwires with a number of nanocrystals on the wire surface are prepared by a simple, low-cost, two-step, solution-processed method at room temperature. Photodetectors based on this CsPbBr3 polycrystalline single microwire are assembled on indium tin oxide electrodes and demonstrate a ...
High-performance 1D CsPbBr3/CdS Photodetectors

Zhi-Lin Xiang,Qiu-Hong Tan,Ting Zhu,Pei-Zhi Yang,Yan-Ping Liu,Ying-Kai Liu,Qian-Jin Wang

DOI: https://doi.org/10.1007/s12598-024-02741-6

IF: 6.318

2024-01-01

Rare Metals

Abstract:The emergence of all-inorganic perovskite CsPbBr3 has ignited significant interest in optoelectronic devices, However, CsPbBr3 thin film-based photodetectors face performance limitations due to grain boundaries and defect density. To address these challenges, we introduce a novel type II heterojunction photodetector utilizing CsPbBr3 microwires (MWs) and CdS nanoribbons (NBs). Remarkably, this photodetector exhibits exceptional characteristics: a high on/off current ratio (1.07 × 105), a responsivity of up to 1.35 × 104 A·W−1, specific detectivity of 5.94 × 1015 Jones, external quantum efficiency of 2.83 × 104
Improvement of CsPbBr3 Photodetector Performance by Tuning the Morphology with PMMA Additive

Zhenghai Ou,Yongsheng Yi,Ziting Hu,Jiajie Zhu,Wenzhen Wang,Hua Meng,Xiaozheng Zhang,Shengqi Jing,Shanhu Xu,Feng Hong,Jian Huang,Juan Qin,Fei Xu,Run Xu,Yanyan Zhu,Linjun Wang

DOI: https://doi.org/10.1016/j.jallcom.2019.153344

IF: 6.2

2020-01-01

Journal of Alloys and Compounds

Abstract:The optoelectrical properties of semiconductor devices are strongly related to the film morphology. Here, we found that, for CsPbBr3 thin films prepared by spray coating, the addition of polymethyl methacrylate (PMMA) can completely eliminate voids and greatly reduce the surface roughness of the as-deposited films. As a consequence, the optoelectronic properties of the photodetectors fabricated as a simple vertical structure of Au/CsPbBr3 (PMMA)/ITO can be improved. With the addition of PMMA, the dark current of the photodetector is reduced at least four times, and the photodetector exhibits a favourable optical response. With the illumination ranging from 400 to 510 nm, the calculated responsivity varies from 3.70 to 5.20 A/W. A good response speed with a rise time of 6.6 ms and a decay time of 11.3 ms can be achieved. Moreover, unlike the inorganic-organic hybrid perovskite detectors, this inorganic perovskite photodetector without encapsulation shows a favourable stability with a decay of 20% after 40 days under ambient air at 20% humidity. (C) 2019 Elsevier B.V. All rights reserved.
Correction: Construction of PtSe2/Ge heterostructure-based short-wavelength infrared photodetector array for image sensing and optical communication applications.

L. Luo,Chenhao Xu,Chao Xie,Jie Ding,Wenbin Li,Xinyi Shen,Yu Lu,Yue Wang,Wanying Zhou,Zipeng Qin

DOI: https://doi.org/10.1039/d1nr90101j

IF: 6.7

2021-06-04

Nanoscale

Abstract:Correction for 'Construction of PtSe2/Ge heterostructure-based short-wavelength infrared photodetector array for image sensing and optical communication applications' by Yu Lu et al., Nanoscale, 2021, 13, 7606-7612, DOI: 10.1039/D1NR00333J.

Engineering,Medicine,Materials Science,Physics
Correction: High-performance p-i-n perovskite photodetectors and image sensors with long-term operational stability enabled by a corrosion-resistant titanium nitride back electrode (vol 15, pg 7803, 2023)

Tian Sun,Tong Chen,Jiahao Chen,Qiang Lou,Zihao Liang,Guijun Li,Xiaoyun Lin,Guoshen Yang,Hang Zhou

DOI: https://doi.org/10.1039/d4nr90024c

IF: 6.7

2024-01-01

Nanoscale

Abstract:Correction for 'High-performance p-i-n perovskite photodetectors and image sensors with long-term operational stability enabled by a corrosion-resistant titanium nitride back electrode' by Tian Sun et al., Nanoscale, 2023, 15, 7803-7811, https://doi.org/10.1039/D3NR00410D.
Correction: An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

Liwen Qiu,Mingqiang Wang,Tian Sun,Qiang Lou,Tong Chen,Guoshen Yang,Wei Qian,Zixuan Zhang,Shihe Yang,Min Zhang,Yufeng Jin,Hang Zhou

DOI: https://doi.org/10.1039/d4nr90023e

IF: 6.7

2024-02-08

Nanoscale

Abstract:Correction for 'An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode' by Liwen Qiu et al., Nanoscale, 2023, 15, 14574-14583, https://doi.org/10.1039/D3NR02801A.
Perovskite Single-Crystal Microwire-Array Photodetectors with Performance Stability Beyond 1 Year

Shun-Xin Li,Yi-Shi Xu,Cheng-Long Li,Qi Guo,Gong Wang,Hong Xia,Hong-Hua Fang,Liang Shen,Hong-Bo Sun

DOI: https://doi.org/10.1002/adma.202001998

IF: 29.4

2020-01-01

Advanced Materials

Abstract:Compared with thin-film morphology, 1D perovskite structures such as micro/nanowires with fewer grain boundaries and lower defect density are very suitable for high-performance photodetectors with higher stability. Although the stability of perovskite microwire-based photodetectors has been substantially enhanced in comparison with that of photodetectors based on thin-film morphology, practical applications require further improvements to the stability before implementation. In this study, a template-assisted method is developed to prepare methylammonium lead bromide (MAPbBr(3)) micro/nanowire structures, which are encapsulated in situ by a protective hydrophobic molecular layer. The combination of the protective layer, high crystalline quality, and highly ordered microstructures significantly improve the stability of the MAPbBr(3) single-crystal microwire arrays. Consequently, these MAPbBr(3) single-crystal microwire-array-based photodetectors exhibit significant long-term stability, maintaining 96% of the initial photocurrent after 1 year without further encapsulation. The lifetime of such photodetectors is hence approximately four times longer than that of the most stable previously reported perovskite micro/nanowire-based photodetector; this is thought to be the most stable perovskite photodetector reported thus far. Furthermore, this work should contribute further toward the realization of perovskite 1D structures with long-term stability.
Halogen‐Mixed 1D CsPbIBr2 Photodetectors for Enhanced Ultraweak Light Detection

Qianjin Wang,Zhilin Xiang,Peizhi Yang,Yingkai Liu,Qiuhong Tan

DOI: https://doi.org/10.1002/adom.202401539

IF: 9

2024-01-01

Advanced Optical Materials

Abstract:Metal halide perovskites recently have emerged as a promising candidate for photodetection due to their exceptional photoelectric performance. However, the high dark current in these materials has hindered their practical application to imaging. In this study, a novel halogen‐mixed CsPbIBr2 microwire photodetector that has a remarkable reduction of dark current by over 100‐fold (compared to CsPbBr3), along with a substantial increase in photocurrent, which yields a significantly improved on/off ratio of 6.56 × 104, is developed. More importantly, the halogen‐mixed perovskite photodetector exhibits enhanced photodetection performance, including a high responsivity of 133 A W−1 and a remarkable specific detectivity of 4.02 × 1012 Jones even under ultraweak light conditions as low as 4.5 nW cm−2. More specifically, high‐resolution images are successfully obtained under ultraweak light conditions. The combined analysis of experimental results and first‐principles calculation attribute the excellent performance of the CsPbIBr₂ microwire photodetector to a significant reduction in dark current by suppressing ion migration and increasing carrier effective mass, and a remarkable increase in photocurrent resulting from reduced bandgap and enhanced light absorption, as compared to CsPbBr3. This research represents a significant advancement in the development of high‐performance 1D perovskite‐based photodetectors, with promising implications for ultra‐weak light imaging applications.
All‐Inorganic CsPbBr 3 Perovskite Nanocrystals/2D Non‐Layered Cadmium Sulfide Selenide for High‐Performance Photodetectors by Energy Band Alignment Engineering

Mingfa Peng,Yulong Ma,Lei Zhang,Shan Cong,Xuekun Hong,Yiheng Gu,Yawei Kuang,Yushen Liu,Zhen Wen,Xuhui Sun

DOI: https://doi.org/10.1002/adfm.202105051

IF: 19

2021-07-20

Advanced Functional Materials

Abstract:Perovskites have attracted intensive attention as promising materials for the application in various optoelectronic devices due to their large light absorption coefficient, high carrier mobility, and long charge carrier diffusion length. However, the performance of the pure perovskite nanocrystals-based device is extremely restricted by the limited charge transport capability due to the existence of a large number of the grain boundary between perovskite nanocrystals. To address these issues, a high-performance photodetector based on all-inorganic CsPbBr3 perovskite nanocrystals/2D non-layered cadmium sulfide selenide heterostructure has been demonstrated through energy band engineering with designed typed-II heterostructure. The photodetector exhibits an ultra-high light-to-dark current ratio of 1.36 × 105, a high responsivity of 2.89 × 102 A W−1, a large detectivity of 1.28 × 1014 Jones, and the response/recovery time of 0.53s/0.62 s. The enhancement of the optoelectronic performance of the heterostructure photodetector is mainly attributed to the efficient charge carrier transfer ability between the all-inorganic CsPbBr3 perovskites and 2D cadmium sulfide selenide resulting from energy band alignment engineering. The charge carriers' transfer dynamics and the mechanism of the CsPbBr3 perovskites/2D non-layered nanosheets interfaces have also been studied by state-state PL spectra, fluorescence lifetime imaging microscopy, time-resolved photoluminescence spectroscopy, and Kelvin probe force microscopy measurements.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
High performance CsBi_3I_10/PCBM bulk heterojunction perovskite photodetector

Hongliang Zhao,Yating Zhang,Jianquan Yao

DOI: https://doi.org/10.1364/ao.510980

IF: 1.9

2024-02-06

Applied Optics

Abstract:Hongliang Zhao, Yating Zhang, Jianquan Yao Lead halide perovskites (LHPs) have been extensively studied due to their remarkable optoelectronic performance. However, the toxicity of a ... [Appl. Opt. 63, 1258-1264 (2024)]

optics
High-Performance CsPbBr3-Silicon Heterojunction Photodetectors Fabricated by Chemical Vapor Deposition

Wanggao Nie,Jingyi Liu,Lairong Yan,Hao Hu,Ping Lin,Chao Liu,Lingbo Xu,Peng Wang,Xiaoping Wu,Can Cui

DOI: https://doi.org/10.1088/1402-4896/ad4d25

2024-05-19

Physica Scripta

Abstract:Inorganic perovskite cesium lead halide (CsPbBr3) has attracted extensive research attention due to its excellent photoelectric properties and long-term stability to water, oxygen, light and heat. In this work, high crystallinity CsPbBr3 microcrystals with different morphologies and grain sizes were synthesized by one-step chemical vapor deposition (CVD) on silicon (Si) wafers and silicon nanowires (SiNWs), respectively. Characterization results show that the CsPbBr3 microcrystals grown on SiNWs (CsPbBr3-SiNWs) display more compact and uniform morphologies than those grown on Si wafer (CsPbBr3-Si). Moreover, CsPbBr3-SiNWs exhibits higher detectivity and larger on/off ratio than CsPbBr3-Si, which are 5.1×1012 Jones over 3.4×1012 Jones, and 51.3 over 14.7, respectively. Furthermore, CsPbBr3-SiNWs shows a faster photo response with a rise/fall time of 0.22 s/0.28 s than 0.26 s/0.32 s in CsPbBr3-Si. In addition, the CsPbBr3-SiNWs photodetector maintained 90% of its original photocurrent after 60 days of exposure to air, showing excellent stability. These results strongly suggest a promising fabrication approach for constructing perovskite-based heterojunction optoelectronic devices with high performance and excellent stability.

physics, multidisciplinary
Author Correction: High oscillator strength interlayer excitons in two-dimensional heterostructures for mid-infrared photodetection

Steven Lukman,Lu Ding,Lei Xu,Ye Tao,Anders C. Riis-Jensen,Gang Zhang,Qing Yang Steve Wu,Ming Yang,Sheng Luo,Chuanghan Hsu,Liangzi Yao,Gengchiau Liang,Hsin Lin,Yong-Wei Zhang,Kristian S. Thygesen,Qi Jie Wang,Yuanping Feng,Jinghua Teng

DOI: https://doi.org/10.1038/s41565-021-00865-9

IF: 38.3

2021-02-05

Nature Nanotechnology

Abstract:A Correction to this paper has been published: https://doi.org/10.1038/s41565-021-00865-9.

materials science, multidisciplinary,nanoscience & nanotechnology
Nanometer-Thick CsPbBr3 Films with Embedded CsPb2Br5 Nanowires for Photodetector Applications

Ziwei Sun,Yong Wang,Ye Liu,Ruliang Liu,Tao Chen,Shuming Ye,Niu Lai,Haoyang Cui,Feng Lin,Rongfei Wang,Jie Yang,Shaoying Ke,Chong Wang

DOI: https://doi.org/10.1021/acsanm.4c01381

IF: 6.14

2024-01-01

ACS Applied Nano Materials

Abstract:All-inorganic perovskite materials have gained enormous attention in photodetectors (PDs) due to their high charge carrier mobility, cost-effectiveness, and tunable bandgap. However, instability and corresponding performance degradation of perovskite PDs when exposed to surrounding humidity persist as challenges. In this work, a composite PD was fabricated by combining CsPb2Br5 nanowires and CsPbBr3 thin-film perovskites as an example to address these problems. The CsPb2Br5 nanowires were prepared by a facile water-bath method to improve the water resistance, and the subsequent evaporation of the CsPbBr3 film formed a type-I heterostructure to enhance its photosensitivity of PDs. As a result, the device exhibits a 10 times higher responsivity of 206 mA/W than that of the bare CsPbBr3 thin film device and maintains 92.85% of its original detectivity after being exposed to a humid environment (RH = 75%) for 144 h. Furthermore, the corresponding fundamental characterization was also performed to reveal the role of CsPb2Br5 nanowires in enhancing the overall performance of the PD. This work provides a simple and efficient approach to enhancing the durability and performance of all-inorganic halide perovskite devices through the embedding of CsPb2Br5 perovskite nanowires.
Correction: Interfacial engineering between SnO2/MAPbI3 by maleate pheniramine halides toward carbon counter electrode-based perovskite solar cells with 16.21% efficiency

Duoling Cao,Zuhong Li,Wenbo Li,Ke Pei,Xu Zhang,Li Wan,Li Zhao,Alexey Cherevan,Dominik Eder,Shimin Wang

DOI: https://doi.org/10.1039/d3qm90014b

IF: 8.6834

2023-02-25

Materials Chemistry Frontiers

Abstract:Correction for 'Interfacial engineering between SnO 2 /MAPbI 3 by maleate pheniramine halides toward carbon counter electrode-based perovskite solar cells with 16.21% efficiency' by Duoling Cao et al. , Mater. Chem. Front. , 2023, https://doi.org/10.1039/d2qm01149b.

materials science, multidisciplinary,chemistry
Correction: Enhanced charge transport from Pd-doping in CsPbBr3 quantum dots for efficient photoelectrocatalytic water splitting

Wenxiao Gong,Yulan Li,Yang Yang,Heng Guo,Xiaobin Niu

DOI: https://doi.org/10.1039/d4tc90156h

IF: 6.4

2024-09-26

Journal of Materials Chemistry C

Abstract:Correction for 'Enhanced charge transport from Pd-doping in CsPbBr 3 quantum dots for efficient photoelectrocatalytic water splitting' by Wenxiao Gong et al. , J. Mater. Chem. C , 2023, 11 , 6963–6970, https://doi.org/10.1039/D3TC00115F.

materials science, multidisciplinary,physics, applied
Achieving Low Cost and High Performance Flexible CsPbIBr2 Perovskite Photodetectors Arrays with Imaging System via Dual Interfacial Optimization and Structural Design

Yue Zhao,Shujie Jiao,Song Yang,Dongbo Wang,Shiyong Gao,Jinzhong Wang

DOI: https://doi.org/10.1002/adom.202400019

IF: 9

2024-03-15

Advanced Optical Materials

Abstract:The PbCl2 and Zinc(II) Dibenzyldithiocarbamate are employed to modify the bottom and top interface of CsPbIBr2 perovskite layer, the self‐powered photodetectors with low‐cost Bi2Te3 electrode achieve excellent photodetection performance and maintain the outstanding stability. The flexible photodetectors array (5 × 5 pixels) and corresponding imaging system are fabricated with uniform and clear imaging results under flatting and bending state. All‐inorganic metal halide perovskites are competitive candidate as next‐generation flexible photodetectors (PDs) materials due to the remarkable photoelectric properties, enhanced heat stability, and mechanical flexibility. However, constructing low‐cost flexible perovskites PDs with high photodetection performance, good operation stability and mechanical robustness, and manufacturing corresponding flexible PDs array have been a challenge. Herein, the PbCl2 and Zinc(II) Dibenzyldithiocarbamate (Zn(DBDTC)2) are employed to modify bottom and top interface of CsPbIBr2 perovskite layer, respectively, to passivate surface trap state, enhance hydrophobicity and resist phase segregation, and improve interface contact. Consequently, the self‐powered champion PDs with low‐cost Bi2Te3 electrode reach a responsivity of 0.38 A W−1 and a maximum detectivity of 3.44 × 1013 Jones at 570 nm, and maintain the outstanding long‐term and operational stability without additional encapsulation. Meanwhile, the HTL‐free flexible PDs based on low‐temperature CsPbIBr2 perovskite layer exhibit impressive photodetection performance and mechanical robustness in bending test. More importantly, the flexible PDs array (5 × 5 pixels) and corresponding imaging system are fabricated with uniform and clear imaging results under flatting and bending state. This research is of great significance for the application of stable and high‐performance inorganic perovskites PDs and flexible array imaging systems.

materials science, multidisciplinary,optics

High-performance perovskite photodetectors based on CsPbBr<sub>3</sub> microwire arrays (vol 60, pg 8896, 2021)

High-performance Perovskite Photodetectors Based on CsPbBr3 Microwire Arrays: Erratum.

High-performance Perovskite Photodetectors Based on CsPbBr3 Microwire Arrays.

Correction: Lanthanide ion doping enabling highly sensitive and stable all-inorganic CsPbI2Br perovskite photodetectors

A high performance CsPbBr3 microwire based photodetector boosted by coupling plasmonic and piezo-phototronic effects

High-Performance Photodetectors Based on Single All-Inorganic CsPbBr3 Perovskite Microwire

High-performance 1D CsPbBr3/CdS Photodetectors

Improvement of CsPbBr3 Photodetector Performance by Tuning the Morphology with PMMA Additive

Correction: Construction of PtSe2/Ge heterostructure-based short-wavelength infrared photodetector array for image sensing and optical communication applications.

Correction: High-performance p-i-n perovskite photodetectors and image sensors with long-term operational stability enabled by a corrosion-resistant titanium nitride back electrode (vol 15, pg 7803, 2023)

Correction: An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

Perovskite Single-Crystal Microwire-Array Photodetectors with Performance Stability Beyond 1 Year

Halogen‐Mixed 1D CsPbIBr2 Photodetectors for Enhanced Ultraweak Light Detection

All‐Inorganic CsPbBr 3 Perovskite Nanocrystals/2D Non‐Layered Cadmium Sulfide Selenide for High‐Performance Photodetectors by Energy Band Alignment Engineering

High performance CsBi_3I_10/PCBM bulk heterojunction perovskite photodetector

High-Performance CsPbBr3-Silicon Heterojunction Photodetectors Fabricated by Chemical Vapor Deposition

Author Correction: High oscillator strength interlayer excitons in two-dimensional heterostructures for mid-infrared photodetection

Nanometer-Thick CsPbBr3 Films with Embedded CsPb2Br5 Nanowires for Photodetector Applications

Correction: Interfacial engineering between SnO2/MAPbI3 by maleate pheniramine halides toward carbon counter electrode-based perovskite solar cells with 16.21% efficiency

Correction: Enhanced charge transport from Pd-doping in CsPbBr3 quantum dots for efficient photoelectrocatalytic water splitting

Achieving Low Cost and High Performance Flexible CsPbIBr2 Perovskite Photodetectors Arrays with Imaging System via Dual Interfacial Optimization and Structural Design