Abstract:Pressure drop (Δp) and collection efficiency (η) are used to evaluate the separation performance of the cyclone separator. In this study, we conducted comparative study of cyclone models using response surface methodology (RSM), back propagation neural network (BPNN), and group method of data handling (GMDH) networks to develop optimal predictive cyclone models. Also, we conducted multi-objective optimization for maximizing model and minimizing model using genetic algorithm (GA). CFD was performed instead of experimental method to get the estimated values for modeling of Δp and η. The validation results of CFD showed 0.5% and 2% errors for Δp and η, respectively, compared with the experimental data. Second, design of experiment (DOE) analysis for 10 cyclone geometrical parameters was executed to obtain the significant geometrical parameters. Vortex finder diameter Dx, inlet width a, inlet height b and cone height Hco have a significant effect on η and Δp. However, interaction effects between the geometrical parameters have small effects. The cyclone models by RSM, BPNN and GMDH based on 25 CFD training set were developed. The predictive performance results by the cyclone models were compared by 25 CFD test set. The GMDH method achieved the best prediction for Δp (R2=99.7, RMSE = 0.102) Radjusted2=98.99, RMSE = 0.0119) than the RSM, BPNN cyclone models. Additionally, uncertainty analysis was performed to estimate the quantitative performance of cyclone models. The results show that the uncertainty width of GMDH models achieved the best prediction (η: ±0.0065, Δp: ±0.0188). Finally, GA was applied to optimize the GMDH models simultaneously. GA generated 70 non-dominant solutions. Reproducibility of five optimal points was validated by using CFD. The trade-off optimal point showed improvement by 24.31%, 18% and 8.79% for Δp d50 and η, respectively.

Multi-objective Optimization of Hydrocyclone by Combining Mechanistic and Data-Driven Models

Optimization of Dual-Impeller Configurations in a Gas–Liquid Stirred Tank Based on Computational Fluid Dynamics and Multiobjective Evolutionary Algorithm

Multi-Objective Optimization of Multistage Centrifugal Pump Based on Surrogate Model

Computational FLuid Dynamics, Artificial Neural Network and Genetic Algorithm As a Hybrid Method for the Design of Hydrogen Peroxide Separation Via Non-Dispersive Solvent Extraction

Optimization of a Gas–Liquid Dual-Impeller Stirred Tank Based on Deep Learning with a Small Data Set from CFD Simulation

Multi-objective optimization and comparison of surrogate models for separation performances of cyclone separator based on CFD, RSM, GMDH-neural network, back propagation-ANN and genetic algorithm

Multi-objective optimization of a gas cyclone separator using genetic algorithm and computational fluid dynamics

Research on structural parameter optimization of a new axial inlet hydrocyclone separator based on response surface optimization method

Multi-objective optimization of a novel vortex finder for performance improvement of cyclone separator

Multi-objective optimization of axial-flow-type gas-particle cyclone separator using response surface methodology and computational fluid dynamics

Reliability-based design of high-performance hydrocyclones: Multi-objective optimization, fabrication using 3D-printing and experimental analysis

Combining 10 meta-heuristic algorithms, CFD, DOE, MGGP and PROMETHEE II for optimizing Stairmand cyclone separator

Multi-objective Optimization of a Low Specific Speed Centrifugal Pump Using an Evolutionary Algorithm

Multi-objective optimization, experimental and CFD approach for performance analysis in square cyclone separator

The multi‐objective optimization of an axial cyclone separator in the gas turbine

Multi-objective Optimization of a Mixed-Flow Pump Impeller Using Modified NSGA-II Algorithm

Evaluation and improvement of mathematical models for hydrocyclone classifiers part I: Laboratory scale

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Design of an Axial Hydrocyclone for Preliminary Water Separation Using CFD, RSM, and SUS

CFD modelling and multi-objective optimization of MHO for hydrodynamic cavitation generator using a radial basis function neural network, and NSGA-II

Multi-objective optimization integrating weighted average surrogate model and NSGA-II intelligent algorithm applied to a self-excited oscillation mixer used in mixed flow descaling