Abstract:This article presents the process of building a hybrid analytical model (HAM) for surface-mounted permanent-magnet machines. The HAM couples a reluctance network (RN) model in the stator region with a magnetic scalar potential analytical model in the air gap and magnets regions. This hybrid model can deal with the slotting effect with straight teeth, and takes magnetic saturation into account in the stator iron material using the RN model. It is calculated under open-circuit and loaded conditions. The magnetic flux density, flux linkage, back electromotive force (EMF), and torque of the machines are also calculated. This hybrid model is compared with the subdomain method. It is also compared with the finite element method (FEM) both in terms of the size of the matrix that needs to be calculated and in terms of the torque error. We analyzed this method for two surface-mounted permanent-magnet machines, one with a symmetry factor of four and another with a symmetry factor of three. In both cases, HAM reduced the size of the matrix that needed to be solved compared to FEM. In the machine with a symmetry factor of three, when the matrix size of both FEM and HAM was around 1700 × 1700, the torque error of FEM was 2.62% compared to the high-mesh-density FEM simulation, while the torque error of HAM was only 0.17% compared to the same simulation. HAM also had significant advantages over the subdomain method, as it reduced the torque error from 16.8% to 0.08% in the case of high magnetic saturation. The HAM can, hence, play a significant role in the design and optimization of surface-mounted permanent-magnet machines, especially in cases where magnetic saturation is present.

Hybrid Modeling Method for Thermal Analysis of Hairpin Winding Permanent Magnet Machine

Advanced Computational-Time Reduction Technology of Nonlinear Fourier-Based and Magnetic Circuit Hybrid Model

Analytical Modeling of Surface-Mounted PM Machines Accounting for Magnet Shaping and Varied Magnet Property Distribution

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Field-circuit Coupled Design and Analysis for Permanent Magnet Synchronous Motor System Used in Electric Vehicles

A Nonlinear 3-D Hybrid Model for Surface-Mounted Permanent Magnet Machines Considering End Effect

Electromagnetic Analysis for Interior Permanent-Magnet Machine Using Hybrid Subdomain Model

Thermal Analysis of a Permanent Magnet Generator with Built-in Hydrostatic Drive

Multi-field Coupled Analysis of a Permanent Magnet Synchronous Motor: Application to High Speed Rail Traction

Multi-field Coupling Finite-Element Analysis of the Temperature Rise in Permanent Magnet Synchronous Motor Applied for High Speed Train

Dynamic Modeling of Surface-Mounted Permanent Magnet Motors Considering Saturation

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Analytical Model of Electromagnetic Performance for Permanent-Magnet Vernier Machines Using Nonlinear Exact Conformal Model

Magnetic Field Prediction In Surface-Mounted Pm Machines With Parallel Slot Based On A Nonlinear Subdomain And Magnetic Circuit Hybrid Model

Open-Circuit Field Prediction of Interior Permanent-Magnet Motor Using Hybrid Field Model Accounting for Saturation

Thermal Analysis of Permanent Magnet Synchronous Motor under Different Working Conditions Based on Thermal Network

Coupled Thermal-Electromagnetic Parametric Modeling of Permanent Magnet Machine Based on Flat Heat Pipe Cooling

An Improved Hybrid Field Model for Calculating On-Load Performance of Interior Permanent-Magnet Motors

On-Load Field Prediction of Surface-Mounted PM Machines Considering Nonlinearity Based on Hybrid Field Model

A Nonlinear Subdomain and Magnetic Circuit Hybrid Model for Open-Circuit Field Prediction in Surface-Mounted PM Machines

A Hybrid Analytical Model for the Electromagnetic Analysis of Surface-Mounted Permanent-Magnet Machines Considering Stator Saturation