Abstract:Rising concentration of anthropogenic CO2 in the atmosphere and oceans challenges the ecological balance of Earth. The rising availability of green electricity from renewable energy resources presents a unique opportunity to remove and store CO2 as durable solid carbonates by utilizing Mg- and Ca-rich seawater and electrochemistry. Nonetheless, the design of electrochemical systems and product selectivity remain unresolved challenges in maximizing the potential of this pathway. Herein, we developed an electrochemical approach that operates sequentially in two modes to selectively precipitate magnesium hydroxide and calcium carbonate under ambient conditions. The yields of Mg(OH)2 and CaCO3 using titanium mesh electrodes at applied potentials of −2.5 V versus Ag/AgCl are as high as 87% and 90%, in the absence and presence of CO2 in the gas phase, respectively. The purities of Mg(OH)2 and CaCO3 after the two-mode electrolysis are as high as 96.8% and 96.5%, respectively. The ease of operation, absence of external chemical reagents, adaptability for resource recovery from seawater and industrial wastewater make this approach uniquely suited for modular deployment. Moreover, simulated brine and flue gas are investigated to demonstrate the adaptability of this technology for industrial application. It is found that the presence of sulfate can influence both the product purity and their associated efficiencies, due to the formation of sulfide byproduct. An electrochemical pathway is developed for brine partial desalination, resource recovery, and CO2 capture and mineralization for the selective precipitation of high-purity calcium carbonate and magnesium hydroxide. In this two-mode electrolysis, magnesium and calcium are separately recovered with efficiencies as high as 87% and 90%, respectively. This approach is a significant advance over existing pathways that do not selectively precipitate calcium carbonate and magnesium hydroxide from brine. The behavior of sulfate ions in simulated brine is also investigated. The use of industrial titanium mesh as an electrode presents an easy fabrication, effective, and durable material option for deploying this approach. The ease of operation, absence of external chemical reagents, adaptability for resource recovery from seawater and industrial wastewater, and increasing availability of low cost and low carbon electricity sourced from renewable energy resources make this approach uniquely suited for modular deployment.

Study on the Recovery of Magnesium Sulfate Heptahydrate from Brine Sludge Produced in Soda Industry

Utilizing seawater and brine to simultaneously produce high-purity magnesium sulfate and vaterite-type calcium carbonate

Recovery of Magnesium from Industrial Effluent and Its Implication on Carbon Capture and Storage

Mechanism and technology of recovery flue gas desulphurization with magnesium oxide

Recovery of Magnesium Sulfate Through Crystallization in Waste Liquid after Simultaneous Desulfurization and Denitrification

High-efficiency and low-carbon remediation of zinc contaminated sludge by magnesium oxysulfate cement

Synthesis of functional ionic liquids with high extraction rate and electroconductivity for lithium-magnesium separation and metallic magnesium production from salt lake brine

Chemical recovery of magnesium from the Dead Sea and its use in wastewater treatment

OBTAINING Na2SO4 FROM SODA SMELTING SLAG FROM THE RECYCLING OF LEAD ACID BATTERIES

Efficient preparation of magnesium bicarbonate from magnesium sulfate solution and saponification-extraction for rare earth separation

Stepwise recovery of metal element from blast-furnace magnesium slag by hydrometallurgy

High-purity vaterite CaCO 3 recovery through wet carbonation of magnesium slag and leaching residue utilization in cement

Phosphorus recovery and iron, copper precipitation from swine wastewater via struvite crystallization using various magnesium compounds

Extraction of magnesium from salt pond waste with low lithium grade using sodium silicate reagent

Electrochemical recovery of high-purity calcium carbonate and magnesium hydroxide from brine via carbon mineralization

Magnesium Recovery of Struvite Formation Based on Waste Salts (Bittern) with a Bulkhead Reactor

Study on magnesium reduction process for air-cooled high magnesium-bearing blast furnace slag

Phosphorus recovery from sewage sludge via Mg-air battery system

The Research on Sodium in Fly Ash Red Mud Was Removed by Using Magnesium Salt

Carbon Sequestration Behavior of Magnesium Oxychloride Cement Based on Salt Lakes Magnesium Residue and Industrial Solid Waste

The Transition of Mg-Containing Phases and Recovery of NaCl in Molten Salt Chloride Slags at High Temperature