Abstract:Hardness behavior and deformation of the microstructure beneath the indentation in 12Cr-ODS steel after exposure to heavy ion irradiation at 573 K were investigated with combined applications of nano-indentation tests, EBSD analysis, and TEM observation. The inhomogeneous nano-indentation hardness behavior was firstly investigated in both non-irradiated and irradiated specimens and compared to those at room temperature (RT) irradiation. Subsequently, TEM observations were performed to understand the deformation behaviors beneath the indentation tested at typical low-indexed orientations. Obvious irradiation hardening was confirmed in both the normal direction (ND) and rolling direction (RD) specimens, and the hardening effect intensified with an increase in irradiation dose. Meanwhile, various anisotropic hardness behaviors were observed such as a lower hardness value and a weaker hardening effect in the RD specimen compared to the ND specimen, and a lower hardness value but a greater hardening effect in [001] orientation relative to [111] orientation. Furthermore, results from 573 K irradiation showed similar anisotropic hardness behaviors with those obtained from RT irradiation, despite the fact that irradiation at 573 K exhibited a weakened irradiation hardening effect in this steel. TEM observation of the deformation microstructure beneath the indentation reveals that (i) the depth of the deformation affected zone varied with orientation, ranging from ~6-9 times that of the indent depth, and (ii) distinct dislocation-grain boundary (GB) interactions beneath the indentations was confirmed to exhibit dependence on the geometric relation between GB and indenter impression direction. Correlation between the anisotropic hardness behavior and microstructural features is discussed based on Schmid factor analysis, comparison of geometric favorability between indenter and possible slip planes, and TEM observation of deformation microstructure. The results conclude that the anisotropic hardness behaviors in the present 12Cr-ODS steel are ascribed to the combined effect of crystal orientation and the non-uniform grain morphology with the existence of the elongated grains having low aspect ratio in the ND plane and nano-layered grains in the RD plane.

Spherical Nanoindentation Stress–strain Responses of SIMP Steel to Synergistic Effects of Irradiation by H and He Ions

Effect of Helium Concentration on Irradiation Damage of Fe-ion Irradiated SIMP Steel at 300 ℃ and 450 ℃

Nanoindentation Experiment and Crystal Plasticity Study on the Mechanical Behavior of Fe-ion-irradiated A508-3 Steel

Synergy effect of radiation damage on 12Cr-ODS steel by multi-ion-beams

Helium-hydrogen Synergistic Effects on Swelling in In-Situ Multiple-Ion Beams Irradiated Steels*

Microstructure Characterization and Hardening Evaluation of Ferrite/Martensitic Steels Induced by He2+ Irradiation

Deformation Behaviour of Ion-Irradiated FeCr: A Nanoindentation Study

Size dependence of micro-scale mechanical properties on heavy-ion irradiated tempered-martensitic steel evaluated through nanoindentation and micropillar compression tests

Nanoindentation Test of Ion-Irradiated Materials: Issues, Modeling and Challenges

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Hardening Behavior and Deformation Microstructure Beneath Indentation in Heavy Ion Irradiated 12Cr-Ods Steel at Elevated Temperature

Deformation Localisation in Ion-Irradiated FeCr

Study of helium irradiation induced hardening in MNHS steel

Mechanical and Raman spectroscopic studies of multi-ion-beam irradiated 12,18Cr-oxide dispersion strengthened steels

Mechanical properties of 6H-SiC irradiated by neutron and MeV heavy ions: A nanoindentation and finite element method study

Simulation of the Irradiation Effect on Hardness of Chinese HTGR A508-3 Steels with CPFEM

Enhanced helium ion irradiation tolerance in a Fe-Co-Ni-Cr-Al-Ti high-entropy alloy with L1 2 nanoparticles

Positron Annihilation and Nano-Indentation Analysis of Irradiation Effects on the Microstructure and Hardening of A508-3 Steels Used in Chinese HTGR

Study on Irradiation Effect in Stress-Strain Response with CPFEM During Nano-Indentation

He and H Irradiation Effects on the Nanoindentation Hardness of CLAM Steel

Effect of helium and its synergism with displacement damage on microstructure of CLAM steel investigated by single, sequential and simultaneous Fe and He ion irradiations