Abstract:One of the crucial branches of activity at the Łukasiewicz Research Network-Institute of Aviation is developing a suborbital rocket vehicle capable of launching small payloads beyond the Earth's atmosphere, reaching over 100 km in altitude. Ensuring safety is a primary concern, particularly given the finite flight zone and impact area. Crucial to safety analysis is the wind profile, especially in the very first seconds of a flight, when rocket velocity is of the same order as the wind speed. Traditional near-ground wind data sources, ranging from wind towers to numerical models of the atmosphere, have limitations. Wind towers are costly and unfeasible at many test ranges used for launches, while numerical modeling may not reflect the specific ground profile near the launcher due to their large cell size (2 to +10 km). Meteorological balloons are not favorable for such measurements as they aim to provide the launch operator with a wind profile at high altitudes, and are launched only 1-2 times per flight attempt. Our study sought to prototype a wind measurement system designed to acquire near-ground wind profile data. It focuses on measuring wind direction and speed at near-ground altitudes with higher flight frequency, offering data on demand shortly before launch to help ensure safety. This atmosphere sounding system consists of an Unmanned Aerial Vehicle (UAV) equipped with an onboard ultrasonic wind sensor. Some reports in the literature have discussed the possibility of using UAV-borne anemometers, but the topic of measurement errors introduced by placing the anemometer onboard an UAV remains under studied. Limited research in this area underlines the need for experimental validation of design choices-for specific types of UAVs, anemometers, and mounting. This paper presents a literature review, a detailed overview of the prototyped system, and flight test results in both natural (outdoor) and controlled (indoor, no wind) conditions. Data from the UAV system's anemometer was benchmarked against a stationary reference weather station, in order to examine the influence of the UAV's rotor on the anemometer readings. Our findings show a wind speed Root Mean Square Error (RMSE) of 5 m/s and a directional RMSE of below 5.3° (both averaged for 1 min). The results were also compared with similar UAV-based wind measurements. The prototyped system was successfully used in a suborbital rocket launch campaign, thus demonstrating the feasibility of integrating UAVs with dedicated sensors for performing regular meteorological measurements in automatic mode.

Test Flight of a Stratospheric Sonic Anemometer Prototype

Modeling and characterization of gas coupled ultrasonic transducers at low pressures and temperatures and implications for sonic anemometry on Mars

Wind Speed Measurement by an Inexpensive and Lightweight Thermal Anemometer on a Small UAV

UAV Atmosphere Sounding for Rocket Launch Support

Towards accurate and practical drone-based wind measurements with an ultrasonic anemometer

On the use of cup anemometers as wind speed sensors in stratospheric balloon missions

The CopterSonde: an insight into the development of a smart unmanned aircraft system for atmospheric boundary layer research

Experimental Study of Hot-Sphere Anemometer Response in Stratospheric Environment

Development and Testing of a Rocket-Based Sensor for Atmospheric Sensing Using an Unmanned Aerial System

Vientos - A new satellite mission concept for 3D wind measurements by combining passive water vapor sounders with Doppler wind lidar

High-altitude balloon-launched uncrewed aircraft system measurements of atmospheric turbulence and qualitative comparison with infrasound microphone response

Testing a Prototype 1U CubeSat on a Stratospheric Balloon Flight

Airfoil Anemometer With Integrated Flexible Piezo-Capacitive Pressure Sensor

A student designed experiment measuring the speed of sound as a function of altitude

Performance Characterization of Heliotrope Solar Hot-Air Balloons during Multihour Stratospheric Flights

Launch of an Innovative Air Pollutant Sampler up to 27,000 Metres Using a Stratospheric Balloon

Validation of the Aeolus L2B Rayleigh Winds and ECMWF Short‐Range Forecasts in the Upper Troposphere and Lower Stratosphere using Loon Super Pressure Balloon Observations

Calibration of 3-D wind measurements on a single-engine research aircraft

Wind Pressure Orthogonal Decomposition Anemometer: A Wind Measurement Device for Multi-Rotor UAVs

New Equations for Sonic Temperature Variance and Buoyancy Heat Flux with an Omnidirectional Sonic Anemometer