Abstract:Carbon dioxide (CO 2 ) being a greenhouse gas whilst generally present in the environment, excess concentration leads to health discomfort and even death. So monitoring and detecting CO 2 is critical to ensure both personal and environmental safety. Traditional CO 2 sensors operate at high temperatures (100–400 °C) because thermal energy is needed for better sensitivity. But high temperatures also lead to added complexities and costs and hence there is a preference for developing sensors capable of operating at room temperature. This study reports on the room temperature sensing of carbon dioxide (CO 2 ), based on a composite of n -type zinc oxide (ZnO) and p -type nickel oxide (NiO). The composite is prepared by co-precipitation route and different compositions are investigated along with pure ZnO and NiO for reference. The prepared composites are characterized by a variety of techniques including X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence (PL), and UV–Visible spectroscopy. A custom-built setup is used to measure the gas sensing performance and the results show that an optimum composition of 80 % ZnO with 20 % NiO exhibits an excellent response to CO 2 , with a sensitivity of 61.1% (measured in terms of the resistance change during exposure) for 40 mg/L CO 2 concentration. The performance of the sensor is explained by the formation and random distribution of n−p junctions in the composite. The results open up the possibility of further improving the sensitivity by using other heterojunction-based composites. The low processing temperature also makes this approach suitable for flexible substrates.

Gas Sensing Performance of Carbon Monoxide Sensor Based on Rod-Shaped Tin Diselenide/mofs Derived Zinc Oxide Polyhedron at Room Temperature

Improved Sensitivity of α-Fe2O3 Nanoparticle-Decorated ZnO Nanowire Gas Sensor for CO

Defect engineering of nanostructured ZnSnO3 for conductometric room temperature CO2 sensors

Enhanced performance of the tangerines-like CuO-based gas sensor using ZnO nanowire arrays

Improving ZnO Thin Film with CuO Nanorods to Enhance the Application in Lower-Work-Temperature Carbon Monoxide Gas Sensing

High-Performance Sulfur Dioxide Gas Sensor Based on Graphite-Phase Carbon-Nitride-Functionalized Tin Diselenide Nanorods Composite

Low concentration CO gas sensor constructed from MoS2 nanosheets dispersed SnO2 nanoparticles at room temperature under UV light

High Performance Gas Sensor Based on ZnO/CuO Heterostructures

Selectivity sensing response of ZnO-xCo3O4 based sensor to CO against CH4

Preparation of Zinc Cobalt Composite Microstructures Derived from Metal-Organic-framwork and Gas-Sensing Properties of Cyclohexanone

Engineering surfaces to improve xylene gas sensing performance in ZnCo2O4 porous architectures

SnO2 Highly Sensitive CO Gas Sensor Based on Quasi-Molecular-Imprinting Mechanism Design

Sythesis and Gas-Sensing Performance of MOF-Derived Zn/Co Composite Microstructures for Cyclohexanone Detection

The preparation of MOFs-derived ZnO/Co3O4 nanocages and its sensing performance to H2S

Sulfur dioxide gas sensing at room temperature based on tin selenium/tin dioxide hybrid prepared via hydrothermal and surface oxidation treatment

Highly Sensitive, Ambient Temperature CO Sensor using Tin Oxide based Composites

Stepwise emergence of CO gas sensing response and selectivity on SnO2 using C supports and PtOx decoration

Room temperature chemiresistive sensing of carbon dioxide using a composite of zinc oxide and nickel oxide

One-Dimensional Zinc Oxide Decorated Cobalt Oxide Nanospheres for Enhanced Gas-Sensing Properties

Preparation of near room temperature gas sensor based on regular octahedral porous ZnO/SnO2 composite

A Highly Sensitive Room Temperature CO2 Gas Sensor Based on SnO2-rGO Hybrid Composite