Investigation on Anode Modes of Vacuum Arc under Different Contact Opening Speeds

Hongda Wang,Lijun Wang,Runming Zhang,Qiang Ma,Cong Wang,Zhefeng Zhang,Ze Yang,Zhiwei Wang

DOI: https://doi.org/10.1063/5.0095824

IF: 2.2

2022-01-01

Physics of Plasmas

Abstract:This paper aims to investigate the anode modes of vacuum arc at different opening speeds, especially at a high opening speed that exceeds 3 m/s. The butt contacts made of CuCr30 and CuCr50 with a diameter of 15 mm are used. Experiments are conducted at the current of 3.3, 4.4, 5.5, and 6.3 kA with a frequency of 50 Hz. An electromagnetic repulsion actuator provides the average opening speed from 1.7 to 3 m/s. The experimental results show that the number of droplets splashing into electrodes increases as the arc current increases, while a higher opening speed decreases the droplets. A higher opening speed will reduce the transferred charge before the anode spot type 2, and a higher Cr content increases the transferred charge before the anode spot type 2. Increasing opening speed will decrease the starting time of anode spot type 2, but it increases the gap distance when anode spot type 2 appears. Meanwhile, the increase in Cr content delays the formation of anode spot type 2.