Abstract:The successful operation of an Autonomous Underwater Vehicle (AUV) requires the capability to return to a dock. A number of underwater docking technologies have been proposed and tested in the past. The docking allows the AUV to recharge its batteries, download data and upload new instructions, which is helpful to improve the working time and efficiency. During the underwater docking process, unsteady hydrodynamic interference occurs between the docking device and an AUV. To ensure a successful docking, it is very important that the underwater docking hydrodynamics of AUV is understood. In this paper, numerical simulations based on the computational fluid dynamics (CFD) solutions were carried out for a 1.85m long AUV with maximum 0.2 m in diameter during the docking process. The two-dimensional AUV model without fin and rudder was used in the simulation. The mathematical model based on the Reynolds-averaged Navier-Stokes (RANS) equations was established. The finite volume method (FVM) and the dynamic structured mesh technique were used. SIMPLE algorithm and the k-ε turbulence model in the Descartes coordinates were also adopted. The hydrodynamics characteristics of different docking states were analyzed, such as the different docking velocity, the docking device including baffle or not. The drag coefficients of AUV in the process of docking were computed for various docking conditions, i.e., the AUV moving into the docking in the speed of 1m/s, 2m/s, 5m/s. The results indicate that the drag coefficient increases slowly in the process of AUV getting close to the docking device. When the AUV moves into the docking device, the drag coefficient increases rapidly. Then the drag coefficient decreases rapidly. The drag coefficient decreases with the increase of velocity when AUV enters the docking device. It was also found that the drag coefficient can be effectively reduced by dislodging the baffle of docking device.

Dynamic characteristics of deep-sea single-point mooring levitation docking system

Research on the Underwater AUV Docking Station with Two Swing Degrees of Freedom

Docking to an Underwater Suspended Charging Station: Systematic Design and Experimental Tests

Features of Dynamism Wharf-Cable-Dynamic-Positioning Vessel Rigid-Flexible Coupling Multi-Body System Analysis

Study on Impact Process of Auv Underwater Docking with A Cone-Shaped Dock

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

A Non-Contact Docking System for Charging and Recovering Autonomous Underwater Vehicle

Development and Test of a Subsea Docking System Applied to an Autonomous Underwater Helicopter

Dynamic Characteristic Analysis of Underwater Suspended Docking Station for Resident UUVs

Dynamic Docking Technology Between AUV and Mobile Mothership

Dynamic Modeling and Simulation of Mooring System for an Unmanned Underwater Vehicle

Analysis of Hydrodynamic Characteristics in the Process of Autonomous Underwater Vehicle Docking

Design, Simulation, and Experimental Study on the Hydraulic Drive System of an AUV Docking Device with Multi-Degree Freedom

Modelling of a Cable-Drogue Docking System for AUV

Hydrodynamic Characteristics Analysis and Mooring System Optimization of an Innovative Deep-Sea Aquaculture Platform

Dynamic Docking Anti‐Disturbance Control of Overactuated AUV: System, Method, and Lake Trails

AUV Dynamic Docking Based on Longitudinal Safety Speed

Analysis for the Deployment of Single-Point Mooring Buoy System Based on Multi-Body Dynamics Method

Dynamics Modeling and Simulation of Docking Process in Aerial Refueling

Experimental Study on Autonomous Docking and Hook-Locking Control for Unmanned Surface Vehicle Platforms

Simulation Research on Dynamic Characteristics of Mooring System for Double Body Working Ship