Enhancement in energy storage performance of La-modified bismuth-ferrite-based relaxor ferroelectric ceramics by defect compensation and process optimization

Yan Yan,Xinyu Zeng,Mingyang Tang,Simeng Song,Fukang Chen,Yangyang Wang,Lishun Yang,Li Jin,Gang Liu

DOI: https://doi.org/10.1016/j.ceramint.2022.07.299

IF: 5.532

2022-01-01

Ceramics International

Abstract:In this investigation, La2O3 was doped into 0.85(0.65BF-0.35BT)-0.15Sr0.7Bi0.2TiO3 (BF-BT-SBT) to form a solid solution with relaxation ferroelectric properties. The dielectric breakdown strength (BDS) of 1% mole of La doping was 220 kV/cm, the maximum recoverable energy storage (Wrec) was 2.35 J/cm3, and the energy storage efficiency (η) was 71%. The relationship between ceramic properties and microstructure was investigated in detail. Doping with La has the following main features: (1) The dissolution of La3+ ions in the A position of the original perovskite structure reduced the concentration of oxygen vacancies in the lattice and played a role of compensating the defects. (2) The dielectric loss of ceramics was reduced, the impedance was greatly increased, and the specimen exhibited a high-temperature stability: a maximum Wrec of 4.04 ± 1.7% J/cm3 in 30–130 °C. (3) The core–shell–like with single phase structure in La-doped ceramics had been successfully observed, which may become a strategy for preparing high-performance ceramics. Higher BDS and denser structures were obtained in 0.01 La ceramics by further optimizing the preparation of the above compositions by the viscous polymer process (VPP). The BDS of 0.01La ceramics prepared by VPP reached 480 kV/cm, the effective energy storage density reached 6.15 J/cm3, and the η was about 81%. This made La-doped 15SBT (chemical composition of BF-BT-SBT + La2O3) ceramics become a potential candidate material for energy storage devices.