Abstract:Grain boundary (GB) strengthening of metallic materials faces limitations as grain sizes are reduced to the nanoscale, primarily due to the transition from the strengthening to the softening effects. Understanding the intrinsic mechanisms behind such pronounced transitions is essential for optimizing the mechanical properties of nanocrystalline (NC) alloys. In this work, the critical grain size responsible for this transition is determined for NC CoCrNi medium-entropy alloys using molecular dynamics simulation, and the underlying mechanisms concerning varying temperatures and strain rates are systematically investigated for the samples with the critical grain size. The transition from Hall-Petch (HP) strengthening to Inverse Hall-Petch (IHP) softening is established by decreasing the average grain sizes from 21 nm to 3 nm. The critical grain size for the current alloys is estimated to be 12 nm, and the underlying deformation mechanisms are illustrated as follows: In the IHP regime, GB-mediated deformation becomes dominant, leading to softening. Conversely, in the HP regime, dislocation slip dominates the deformation mode, contributing to strengthening. It is found that an increase in temperature from 77 K to 1100 K leads to a decrease in the average flow stress and Young's modulus. Meanwhile, the deformation mechanisms change from dislocation slip (77K-700K) to GB-mediated deformation (700 K-1100 K). Furthermore, the underlying mechanisms correlating to the critical strain rate are uncovered. It can be attributed to the shift in deformation mechanisms from dislocation slip at relatively low strain rate regimes (5 x 10(7) s(-1)-2 x 10(9) s(-1)) to dislocation drag at relatively high strain rate regimes (2 x 10(9) s(-1)-5 x 10(9) s(-1)). Our atomistic insights into the tensile response of NC CoCrNi may provide a crucial basis for designing superior properties to meet the growing demands of advanced engineering fields.

Unravelling the Size‐Dependent Mechanical Properties of Nanocrystalline Face‐Centered‐Cubic Metals: from the Dislocation Point of View

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Grain Size Effect on Deformation Mechanisms of Nanocrystalline bcc Metals

A dislocation-density-based crystal plasticity model for FCC nanocrystalline metals incorporating thermally-activated depinning from grain boundaries

Phase Field Crystal Simulation of Microscopic Deformation Mechanism of Reverse Hall-Petch Effect in Nanocrystalline Materials

Enhanced Strain-Rate Sensitivity in Fcc Nanocrystals Due to Grain-Boundary Diffusion and Sliding

A Thermally Activated Dislocation-Based Constitutive Flow Model of Nanostructured FCC Metals Involving Microstructural Evolution

Model for the Prediction of the Mechanical Behaviour of Nanocrystalline Materials

Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals

Enhanced Ductility of Nanomaterials Through Cooperative Dislocation Emission from Cracks and Grain Boundaries

Impact of Grain Size Distribution on the Multiscale Mechanical Behavior of Nanocrystalline Materials

Effect of Grain Size, Temperature, and Tensile Strain Rate on Mechanical Response of CoCrNi Medium-Entropy Alloys

The Strain Hardening of Micro-Sized Face-Centered-cubic Single Crystal Metals: A Crystal Plasticity Study

Unified Model for Size-Dependent to Size-Independent Transition in Yield Strength of Crystalline Metallic Materials.

Modeling of the Plastic Deformation of Nanostructured Materials with Grain Size Gradient

Strain Rate Sensitivity Of Face-Centered-Cubic Nanocrystalline Materials Based On Dislocation Deformation

Temperature and Grain Size Dependences of Mechanical Properties of Nanocrystalline Copper by Molecular Dynamics Simulation

An Elastic–viscoplastic Model of Deformation in Nanocrystalline Metals Based on Coupled Mechanisms in Grain Boundaries and Grain Interiors

Inverse Grain-Size-dependent Strain Rate Sensitivity of Face-Centered Cubic High-Entropy Alloy

Mapping the Strain-Rate and Grain-Size Dependence of Deformation Behaviors in Nanocrystalline Face-Centered-cubic Ni and Ni-based Alloys

Grain Size Dependent Strain Rate Sensitivity in Nanocrystalline Body-Centered Cubic Metal Thin Films