Abstract:Catalytic hydrogenation of CO2 to methanol has attracted considerable attention due to its potential in alleviating global warming and mitigating the dependence on fossil fuels. Cu-based catalysts are widely used in industry because of their high activity for methanol production. However, the reaction still suffers from low methanol selectivity because of the generation of CO as a by-product via the reverse water gas shift reaction (RWGS). The formation of another by-product H2O leads to inevitable Cu sintering, which decreases the methanol production rate. It is well known that CO can alter competitive molecular adsorption on the surface and the redox behavior of the active sites; hence, CO doping in feed gas might not only inhibit the RWGS but also minimize surface poisoning by the adsorbed oxygen. On the other hand, CO2 hydrogenation to methanol over Cu-based catalysts is a structure-sensitive reaction, and a change in the precursor can have a remarkable influence on the structure and morphology of the catalyst, and ultimately, the catalytic performance. In this work, Cu/ZnO/Al2O3 catalysts have been prepared via a hydrotalcite-like precursor (CHT-CZA) and a complex phase precursor (CNP-CZA) using co-precipitation and ammonia evaporation methods. Subsequently, the performance of the two types of catalysts with different CO contents (CO2 : CO : H-2 : N-2 = x : (24.5 - x) : 72.5 : 3) is compared at 250 degrees C and 5 MPa in order to explore the role of CO. The evaluation results show that both catalysts follow a similar trend in the conversion of CO and CO2 as well as the space-time-yield (STY) of MeOH and H2O. The conversions of CO2 and STYH2O decrease gradually with an increase in the CO volume, but STYMeOH is positively correlated with the CO volume. Furthermore, X-ray photoelectron spectroscopy (XPS) analysis reveals that the amount of reduced Cu species on the surface increases with increasing CO content. Judging from these results, the introduction of CO inhibits the RWGS and enhances the methanol yield for both catalysts by removing the surface oxygen as the reducing agent and thereby facilitating the exposure of the active reduced Cu species. On the other hand, transmission electron microscopy (TEM) observations indicate the doped CO may cause agglomeration of particles due to over-reduction, leading to gradual catalyst deactivation. Compared with the traditional CNP-CZA, the catalyst derived from hydrotalcite-like compounds exhibits better activity and long-term stability under all atmospheres, at different CO doping levels. This is because the hydrotalcite-like layer structure helps maintain the active metal state and confine the structure by limiting the agglomeration of Cu species.

Methanol Synthesis from CO2/CO Mixture on Cu-Zn Catalysts from Microkinetics-Guided Machine Learning Pathway Search.

Methanol Synthesis from CO 2 /CO Mixture on Cu-Zn Catalysts from Microkinetics-Guided Machine Learning Pathway Search

Methanol Synthesis from CO 2 : a DFT Investigation on Zn-promoted Cu Catalyst

Thermal Methanol Synthesis from CO2 Using Cu/ZnO Catalysts: Insights from First-Principles Calculations

Recent progress in understanding the nature of active sites for methanol synthesis over Cu/ZnO catalysts

Methanol Synthesis from CO/CO_2 Hydrogenation over Cu/Zn/Al/Mn Catalyst

Methanol Synthesis by COx Hydrogenation over Cu/ZnO/Al2O3 Catalyst Via Hydrotalcite-Like Precursors: the Role of CO in the Reactant Mixture

The Role of Cu1-O3 Species in Single-Atom Cu Catalyst for Directional Methanol Synthesis from CO2 Hydrogenation

Enhanced Methanol Synthesis from CO 2 Hydrogenation Achieved by Tuning the Cu-ZnO Interaction in ZnO/Cu 2 O Nanocube Catalysts Supported on ZrO 2 and SiO 2

In Situ Spectroscopic Characterization and Theoretical Calculations Identify Partially Reduced ZnO<sub>1-<i>x</i></sub>/Cu Interfaces for Methanol Synthesis from CO<sub>2</sub>

CO 2 Hydrogenation to Methanol Over Cu/ZnO/Al 2 O 3 Catalyst: Kinetic Modeling Based on Either Single- or Dual-Active Site Mechanism

Methanol Synthesis from CO2 Hydrogenation with a Cu/Zn/Al/Zr Fibrous Catalyst

Optimizing Methanol Synthesis from CO2 Hydrogenation over Inverse Zr-Cu Catalyst

Insight into Methanol Synthesis from Co2 Hydrogenation on Cu(111): Complex Reaction Network and the Effects of H2o

Identifying the nature of the active sites in methanol synthesis over Cu/ZnO/Al2O3 catalysts

CO2 Hydrogenation to Methanol Over Cu/ZnO/Al2O3 Catalyst: Kinetic Modeling Based on Either Single- or Dual-Active Site Mechanism

Mechanism of Methanol Synthesis from CO2 Hydrogenation over Cu/γ-Al2O3 Interface: Influences of Surface Hydroxylation

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

Mechanistic insight into the catalytically active phase of CO2 hydrogenation on Cu/ZnO catalyst

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation

Insight into the Role of Cu-ZrO2 Interaction in Methanol Synthesis from CO2 Hydrogenation