Abstract:Finite control set model predictive control (FCS-MPC) is a control strategy with fast response and a simple and flexible structure. However, when the control plant is complicated such as a multiphase electric machine, the application of FCS-MPC faces clear challenges. This article for the first time investigates the FCS-MPC for a nine-phase open-end winding (OW) permanent magnet synchronous machine, which is powered by nine H-bridge inverters with a common dc bus. First, in order to solve the challenge of substantial iterations in the conventional FCS-MPC, the number of control sets is simplified by reconfiguring the high level in switching states. Then, to eliminate the zero-sequence current caused by the common dc bus, the zero common-mode voltage (CMV) vector is selected. Subsequently, duty-ratio optimization is used to further reduce the available vectors. By the abovementioned measures, the number of iterations is reduced from 19 171 to 18. In order to suppress the harmonic current, the virtual voltage vectors (VVs) are designed. Each VV is synthesized by two zero CMV vectors, which can eliminate all the third and fifth harmonics in the output voltage. In addition, to achieve symmetrical pulsewidth modulation pulse sequences, a general pulse generation method for OW drive systems is proposed. Finally, the control performance of different control sets and harmonic weighting factors are evaluated and compared, and the experimental results have verified the effectiveness of the proposed methods.

Current-Source Inverter Fed Five-Phase PMSM Drives with Pentagon Stator Winding Considering SVM Scheme, Resonance Damping, and Fault Tolerance

Current Control Scheme for LC-Equipped PMSM Drive Considering Decoupling and Resonance Suppression in Synchronous Complex-Vector Frame

Hybrid Frame-Based Current Control Scheme for LC-Equipped PMSM with Non-Sinusoidal Back-EMF

Open-Circuit Fault-Tolerant Control for Pentagon Winding Connected Five-Phase Current-Source Inverter Based PMSM Drives

Carrier-Based PWM Technique and Extended State Observer-Based Current Control Scheme for Current-Source Inverter-Fed Five-Phase PMSM Drives

Three-Phase Current-Source Inverter-Based PMSM Control Scheme Considering Star and Delta Winding Connections

An Eight-Switch Five-Level Current Source Inverter

Discrete-time Passivity-Based Sliding-Mode Control of Single-Phase Current-Source Inverter

Control Strategy for Open Winding PMSM System Supplied by the Z-source and Voltage Source Integrated Converters

Inverter Reconstruction Approach for Open-End Winding Five-Phase PMSM With Pattern-Based Vector Synthesis and Hybrid SVPWM Modulation

Pwm Control Of A 5-Level Single-Phase Current-Source Inverter With Controlled Intermediate Dc-Link Current

Stator Inter-Turn Fault Detection in Closed-Loop Controlled Drive Based on Switching Sideband Harmonics in CMV

Accurate Two-Degree-of-freedom Discrete-Time Current Controller Design for PMSM Using Complex Vectors

Model Predictive Control with Duty Ratio Modulation for Open-Winding PMSM Driveswith Common DC Bus

Robust Stator Winding Fault Detection in PMSMs with Respect to Current Controller Bandwidth

Realization of A Spwm Inverter for Multi-Phase Induction Motor Drives

Simplified PWM for Fault Tolerant Control of Open Winding PMSM Fed by Hybrid Inverter

Active Damping Current Control for Current-Source Inverter-Based PMSM Drives

Virtual Voltage Vector Based Model Predictive Control for a Nine-Phase Open-End Winding PMSM With a Common DC Bus

A boost converter-based CSI-fed PMSM drives with common-mode voltage suppression for low-input voltage application

Robust Model Predictive Current Control for a Nine-Phase Open-End Winding PMSM With High Computational Efficiency