Abstract:To exploit the potential of the reconfigurable intelligent surface (RIS) in supporting integrated sensing and communication (ISAC), this paper proposes a novel joint active and passive beamforming design for RIS-enabled ISAC system in consideration of the target size. First, the detection probability for target sensing is derived in closed-form based on the illumination power on an approximated scattering surface area of the target, and a new concept of ultimate detection resolution (UDR) is defined for the first time to measure the target detection capability. Then, an optimization problem is formulated to maximize the signal-to-noise ratio (SNR) at the user-equipment (UE) under a minimum detection probability constraint. To solve this non-convex problem, a novel alternative optimization approach is developed. In this approach, the solutions of the communication and sensing beamformers are obtained by our proposed bisection-search based method. The optimal receive combining vector is derived from an equivalent Rayleigh-quotient problem. To optimize the RIS phase shifts, the Charnes-Cooper transformation is conducted to cope with the fractional objective, and a novel convexification process is proposed to convexify the detection probability constraint with matrix operations and a real-valued first-order Taylor expansion. After the convexification, a successive convex approximation (SCA) based algorithm is designed to yield a suboptimal phase-shift solution. Finally, the overall optimization algorithm is built, followed by detailed analyses on its computational complexity, convergence behavior and problem feasibility condition. Extensive simulations are carried out to testify the analytical properties of the proposed beamforming design, and to reveal two important trade-offs, namely, communication vs. sensing trade-off and UDR vs. sensing-duration trade-off. In comparison with several existing benchmarks, our proposed approach is validated to be superior when detect- ng targets with practical sizes.

Joint Beamforming Aided Over-the-Air Computation Systems Relying on Both BS-Side and User-Side Reconfigurable Intelligent Surfaces.

Beamforming Design Based on Two-Stage Stochastic Optimization for RIS-Assisted Over-the-Air Computation Systems

Simultaneously Transmitting and Reflecting (STAR) RIS Assisted Over-the-Air Computation Systems

Beamforming Design for Active RIS-Aided Over-the-Air Computation

Reconfigurable Intelligent Surface Assisted Integrated Sensing, Communication and Computation Systems

Robust Design of RIS-Assisted Over-the-Air Computation in the Face of Long-Term and Short-Term Imperfections

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Active Reconfigurable Intelligent Surface-Aided Over-the-Air Computation Networks

Over-the-Air Computation via Reconfigurable Intelligent Surface

A Robust Deep Learning-Based Beamforming Design for RIS-Assisted Multiuser MISO Communications with Practical Constraints

Joint Beamforming Design for Active RIS-Aided THz ISAC Systems with Delay Alignment Modulation.

Robust Secure Beamforming Design for Multi-RIS-Aided MISO Systems with Hardware Impairments and Channel Uncertainties

Joint Beamforming Design for RIS-Assisted Integrated Sensing and Communication Systems

Joint Beamforming for RIS-Assisted Integrated Sensing and Communication Systems

Over-the-Air Computation via Intelligent Reflecting Surfaces

Intelligent Reflecting Surface Aided AirComp: Multi-Timescale Design and Performance Analysis

Location Information Assisted Beamforming Design for Reconfigurable Intelligent Surface Aided Communication Systems

Joint Transmit Waveform and Passive Beamforming Design for RIS-Aided DFRC Systems

Joint Beamforming for RIS-assisted Integrated Communication, Sensing and Power Transfer Systems

Joint Beamforming and Reflecting Design in Reconfigurable Intelligent Surface-Aided Multi-User Communication Systems

Joint Active and Passive Beamforming Design for Reconfigurable Intelligent Surface Enabled Integrated Sensing and Communication