Abstract:In this work, a short-term thermal drying procedure of cellulosic fibers was designed to present pore expansion and increase via lignin-cellulose phase separation. The applicability of this procedure was studied by using four never-dried cellulosic fibers with different lignin contents and tree species (poplar, eucalyptus, bamboo) as raw materials. This procedure significantly improved the properties of high lignin containing fibers, especially pore parameters and water retention capacity. When heated at 150 °C, the increased yields of fiber properties reached 38% (specific surface area), 26.8% (pore volume), 30.5% (average pore size), and 29.4% (water retention value), respectively. Based on its most critical change, this phenomenon was called “thermal drying-induced pore expansion effects”. Key factors for pore expansion effects were temperature, time, lignin content, and the stacked structure (i.e., fiber arrangement structure). Pore expansion effects could be used to enhance pore related applications, such as lignocellulosic enzymatic hydrolysis and papermaking. Pore expansion effects under heating at 105 °C for 10 min increased enzymatic digestibility at 6 h by 11%. After the same treatment, the water absorption and bursting index of papers made of the treated fibers were increased by 9.09% and 40%, respectively. The pore expansion effect proposed in this study expands the drying research of cellulosic fibers and provides a reference for using drying to enhance biomass conversion and improve the properties of cellulose materials.

Relationship Between Freeze-Drying and Supercritical Drying of Cellulosic Fibers with Different Moisture Contents Based on Pore and Crystallinity Measurements

A COMPARATIVE STUDY OF CELLULOSE NANOWHISKERS (cnws) AND CELLULOSE NANOFIBERS (Cnfs)

Low-temperature Thermal Drying-Induced Pore Expansion Effects of Cellulosic Fibers

Short-term thermal drying-induced pore expansion effects of cellulosic fibers and its applications

Study on the Preparation of Cellulose-based Porous Material by Freeze-drying Process

The Influence of “thermal Drying Pretreatment” on Enzymatic Hydrolysis of Cellulose and Xylan in Poplar Fibers with High Lignin Content

Effect of Different Dehydration Methods on Structure and Property of Nano Bacterial Cellulose and Dynamics Analysis of Their Water Reabsorption

Elucidating the hornification mechanism of cellulosic fibers during the process of thermal drying

Multi-scale and multi-mechanism of low temperature damage of cotton fiber

Effect of Partial Dehydration on Freeze-Drying of Aqueous Nanocellulose Suspension

Nanoporous microparticles of cellulose nanofibrils: The effect of fluid bed atmospheric spray freeze drying

Revealing pore size distribution in cellulose and lignin-cellulose man-made fibers – effect of draw ratio and lignin content

Numerical investigation on freeze-drying of aqueous material frozen with pre-built pores

Study On Effects Of Drying And Sizing On Microstructure Of Recycled Fibers

Experimental and Numerical Investigations on Freeze-Drying of Porous Media with Prebuilt Porosity

Study on Effects of Drying and Sizing on the Properties of Recycled Fibers

Effect of Nanocellulose Fiber Hornification on Water Fraction Characteristics and Hydroxyl Accessibility During Dehydration.

Effects of Pressing and Drying on the Cellulase Crystalline Degree of Recycled Fiber

States of Water in Cellulose Hydrogels and Influence on the Crystallization of Cellulose?

Effects of the Solids Content of TEMPO-oxidized Cellulose Prior to Freeze-drying on the Properties of the Dried Materials

Effect of fiber drying on properties of lignin containing cellulose nanocrystals and nanofibrils produced through maleic acid hydrolysis