Abstract:A biometalllic ZnO/ZnMn2O4 catalyst was synthesized, characterized, and optimized to activate PMS to degrade 2, 4‐DCP and other pollutants. The potential activation and degradation mechanism was investigated by exploring the primary active radicals and degradation pathways of 2, 4‐DCP. In this study, a highly efficient peroxymonosulfate (PMS) activator, ZnO/ZnMn2O4, was synthesized using a simple one‐step hydrothermal method. The resulting bimetallic oxide catalyst demonstrated a homogenous and high‐purity composition, showcasing synergistic catalytic activity in activating PMS for degrading 2, 4‐dichlorophenol (2, 4‐DCP) in aqueous solution. This catalytic performance surpassed that of individual ZnO, Mn2O3, and ZnMn2O4 metal materials. Under the optimized conditions, the removal efficiency of 2, 4‐DCP reached approximately 86% within 60 min, and the catalytic ability remained almost constant even after four cycles of recycling. The developed degradation system proved effective in degrading other azo‐dye pollutants. Certain inorganic anions such as HPO4−, HCO3−, and NO3− significantly inhibited the degradation of 2, 4‐DCP, while Cl− and SO42− did not exhibit such interference. Results from electrochemical experiments indicated that the electron transfer ability of ZnO/ZnMn2O4 surpassed that of individual metals, and electron transfer occurred between ZnO/ZnMn2O4 and the oxidant. The primary active radicals responsible for degrading 2, 4‐DCP were identified as SO4•−, OH• and O2•−, generated through the oxidation and reduction of PMS catalyzed by Zn (II) and Mn (III). Furthermore, X‐ray photoelectron spectroscopy (XPS) analysis of the fresh and used catalysts revealed that the exceptional electron transfer ability of ZnO facilitated the valence transfer of Mn (III) and the transfer of electrons to the catalyst's oxygen surface, thus enhancing the catalytic efficiency. The analysis of radicals and intermediates indicates that the two main pathways for degrading 2, 4‐DCP involve hydroxylation and radical attack on its aromatic ring. Practitioner Points A bimetallic ZnO/ZnMn2O4 catalyst was synthesized and characterized. ZnO/ZnMn2O4 can synergistically activate PMS to degrade 2, 4‐DCP compared with single metal oxide. Three primary active radicals, O2•−, •OH, and SO4•−, were generated to promote the degradation. ZnO promoted electron transfer among the three species of Mn to facilitate oxidizing pollutants. Hydroxylation and radical attack on the aromatic ring of 2, 4‐DCP are the two degradation pathways.

Activation of Peroxymonosulfate by Nanoscaled NiFe2O4 Magnetic Particles for the Degradation of 2,4-Dichlorophenoxyacetic Acid in Water: Efficiency, Mechanism and Degradation Pathways

Efficient Degradation of 2,4-Dichlorophenol in Aqueous Solution by Peroxymonosulfate Activated with Magnetic Spinel FeCo2O4 Nanoparticles

B-doped NiFe2Ox Based on the Activation of Peroxymonosulfate for Degrading 2,4-Dichlorophenoxyacetic Acid in Water

Synergistic Mechanism of Surface Oxygen Vacancies and Metal Sites on Al-substituted NiFe2O4 During Peroxymonosulfate Activation in the Solid-Water Interface for 2,4-D Degradation

Activation of Peroxymonosulfate by Fe3O4–CsxWO3/NiAl Layered Double Hydroxide Composites for the Degradation of 2,4-Dichlorophenoxyacetic Acid

Highly efficient activation of peroxymonosulfate by cobalt ferrite anchored in P-doped activated carbon for degradation of 2,4-D: Adsorption and electron transfer mechanism

Activation of Persulfate by Stability-Enhanced Magnetic Graphene Oxide for the Removal of 2,4-Dichlorophenol

Degradation of 2, 4‐dichlorophenol by peroxymonosulfate catalyzed by ZnO/ZnMn2O4

Fe and Zn co-doped carbon nanoparticles as peroxymonosulfate activator for efficient 2,4-dichorophenol degradation

Efficient degradation of 2,4-dichlorophenoxyacetic acid by peroxymonosulfate/magnetic copper ferrite nanoparticles/ozone: A novel combination of advanced oxidation processes

Enhanced Oxidative Degradation of 2,4-Dichlorophenol by Iron Oxychloride Supported on Graphitic Carbon Nitride Via Peroxymonosulfate Activation: Significant Role of Fe(II)/Fe(III) Conversion Cycle

Heterogeneous Fenton-Like Catalytic Degradation of 2,4-Dichlorophenoxyacetic Acid by Nano-Scale Zero-Valent Iron Assembled on Magnetite Nanoparticles

Electron Transfer Enhancing Fe(II)/Fe(III) Cycle by Sulfur and Biochar in Magnetic FeS@biochar to Active Peroxymonosulfate for 2,4-Dichlorophenoxyacetic Acid Degradation

CuO-Co3O4@CeO2 As a Heterogeneous Catalyst for Efficient Degradation of 2,4-Dichlorophenoxyacetic Acid by Peroxymonosulfate.

Mechanism and Performance of Singlet Oxygen Dominated Peroxymonosulfate Activation on CoOOH Nanoparticles for 2,4-Dichlorophenol Degradation in Water.

Fenton-like Degradation of 2,4-Dichlorophenol Using Fe3O4 Magnetic Nanoparticles

Degradation of 2,4-Dichlorophenoxyacetic Acid in Water by Persulfate Activated with FeS (Mackinawite)

Enhanced Degradation of 2,4-Dichlorophenoxyacetic Acid by Pre-Magnetization Fe-C Activated Persulfate: Influential Factors, Mechanism and Degradation Pathway.

Activation of Peroxymonosulfate with Magnetic Fe3O4–MnO2 Core–shell Nanocomposites for 4-Chlorophenol Degradation

Aeromonas Hydrophila-Derived BioMnOx Activates Peroxymonosulfate for 2,4-Dimethylaniline Degradation in Water: Mechanisms and Catalyst Reusability

Enhanced Electrocatalytic Cathodic Degradation of 2,4-Dichlorophenoxyacetic Acid Based on a Synergistic Effect Obtained from Co Single Atoms and Cu Nanoclusters