Abstract:The simultaneous and competitive ultrasound-assisted removal of Auramine-O (AO), Erythrosine (Er) and Methylene Blue (MB) from aqueous solutions were rapidly performed onto copper-doped zinc sulfide nanoparticles loaded on activated carbon (ZnS:Cu-NP-AC). ZnS:Cu nanoparticles were studied by FESEM, XRD and TEM. First, the effect of pH was optimized in a one-at-a-time procedure. Then the dependency of dyes removal percentage in their ternary solution on the level and magnitude of variables such as sonication time, initial dyes concentrations and adsorbent dosage was fully investigated and optimized by central composite design (CCD) under response surface methodology (RSM) as well as by regarding desirability function (DF) as a good and general criterion. The good agreement found between experimental and predicted values supports and confirms the suitability of the present model to predict adsorption state. The applied ultrasound strongly enhanced mass transfer process and subsequently performance. Hence, a small amount of the adsorbent (0.04 g) was capable to remove high percentage of dyes, i.e. 100%, 99.6% and 100% for MB, AO and Er, respectively, in very short time (2.5 min). The experimental equilibrium data fitting to Langmuir, Freundlich, Temkin and Dubinin-Radushkevich models showed that the Langmuir model applies well for the evaluation and description of the actual behavior of adsorption. The small amount of proposed adsorbent (0.015 g) was applicable for successful removal of dyes (RE>99.0%) in short time (2.5 min) with high adsorption capacity in single component system (123.5 mg g(-1) for MB, 123 mg g(-1) for AO and 84.5 mg g(-1) for Er). Kinetics evaluation of experiments at various time intervals reveals that adsorption processes can be well predicated and fitted by pseudo-second-order and Elovich models.

Adsorption and Removal of Direct Red 31 by Cu-MOF: Optimization by Response Surface

Adsorption Performances for Aqueous Cu(II) onto Chelating Resin Dowex M-4195: Interaction Mechanism Investigation

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Characterization of Sn-MOF and its adsorption application for Acid Red 3R

Simultaneous ultrasound-assisted ternary adsorption of dyes onto copper-doped zinc sulfide nanoparticles loaded on activated carbon: optimization by response surface methodology

Preparation of 26-facet Cu2O@Cu composite and its methyl orange adsorption behavior

Simultaneous and ultrafast removal of anionic and cationic dyes from aqueous solution by Zr-based MOFs hybridized by attapulgite and adsorption performance research

Removal performance and adsorption kinetics of dyes by a Co-based metal organic framework

Composite adsorbents of aminated chitosan @ZIF-8 MOF for simultaneous efficient removal of Cu(II) and Congo Red: Batch experiments and DFT calculations

Removal of Cu(II) Ions from Contaminated Water Using Chemically Modified MCM-41

An interface synthesis of Cu-BTC/PVDF hybrid membranes and their selective adsorption activity toward Congo red

Bimetallic PCN-333 with Modulated Crystallization and a Porosity Structure for a Highly Efficient Removal of Congo Red

Adsorptive removal of Direct Red 31 and Direct Orange 26 azo dyes from aqueous solutions using Ficus nano zero valent copper: Linear, non-linear, response surface methodology (RSM), and artificial neural network (ANN) modeling

Synthesis of Porphyrin-based MOF/Cloisite-30B nanocomposite for selective dye adsorption: Optimization by Design-Expert, Adsorption, and Kinetic Study

Efficient and selective adsorption of dye in aqueous environment employing a functional Zn(II)-based metal organic framework

Amine-functionalized MOF-derived carbon materials for efficient removal of Congo red dye from aqueous solutions: simulation and adsorption studies

Enhanced simultaneous removal of direct red 81 and bisphenol A from aqueous media by coupling nano zero-valent iron (nZVI) particles with graphene oxide and copper: Isotherm and kinetic adsorption studies

Adsorption of Dispersed Red from Aqueous Solution Onto Calcined Layered Double Hydroxides: Equilibrium, Kinetics Studies

Efficient Adsorption of Anionic Azo Dye in Wastewater with Medulla Tetrapanacis Modified by Cationic Surfactant

Selective adsorption and removal of drug contaminants by using an extremely stable Cu(II)-based 3D metal-organic framework

Multifunctional Adsorbent: Oleophobic Latex Sponge for Removing Dyes and Cu2+ from Sewage Waste