Abstract:The evaporation heat transfer of a loop heat pipe (LHP) flat evaporator with porous wick is numerically simulated at pore scale using an advanced phase-change Lattice Boltzmann Method (LBM). The effects of heat flux and surface wettability (contact angle) on the patterns and dynamics of liquid-vapor interface, liquid volume fraction, temperature distribution at wick-fin and wick-groove interfaces, as well as effective heat transfer coefficient of the evaporator are investigated. It is found that liquid-vapor interface will appear five kinds of patterns or dynamics sequentially with the increase of heat flux, i.e., (a) entirely saturated wick, (b) partially saturated wick with periodical nucleation and vanishing of bubbles, (c) partially saturated wick with periodical growth and shrink of bubbles, (d) partially saturated wick with stable liquid-vapor interface, and (e) fully dry-out at wick-fin interface. Generally, the higher the heat flux and the larger the contact angle, the smaller the steady-state liquid volume fraction in the wick. However, at a certain range of heat flux, the liquid volume fraction oscillates periodically corresponding to periodical oscillations of liquid-vapor interface, and its amplitude and period increases with increasing heat flux and contact angle. Due to the random pore size distribution of porous wick, the temperature distributions are not symmetric between the left and the right outlets. This discrepancy is especially significant for partially saturated wicks, revealing the remarkable impacts of local pore structure on evaporation characteristics. With the increase of heat flux, the effective heat transfer coefficient at first increases owing to the inception and development of bubble nucleation within the wick, and then decreases due to the occurrence and enlargement of dry out. The larger the contact angle, the smaller the heat flux to trigger the bubble nucleation, and therefore the earlier to achieve the maximum effective heat transfer coefficient. Nevertheless, contact angles studied in this paper have no obvious effect on the maximum value of effective heat transfer coefficient.

Developing of an Open-Source Toolbox for Liquid-Vapor Phase Change in the Porous Wick of a LHP Evaporator Based on OpenFOAM

Three-dimensional Lattice Boltzmann Investigation on Pore Scale Liquid–vapor Distribution Patterns and Heat Transfer Performance of a Loop Heat Pipe Heterogeneous Porous Wick Evaporator

Pore Scale Simulation of Evaporation in a Porous Wick of a Loop Heat Pipe Flat Evaporator Using Lattice Boltzmann Method

Mathematical Model and Numerical Simulation of Flow and Heat Transfer in LHP's Capillary Wick with Azimuthal Vapor Grooves

Investigation on Heat and Mass Transfer in A Evaporator of A Capillary-Pumped Loop with the Lattice Boltzmann Method: Pore Scale Simulation

Numerical Simulations of the Liquid-Vapor Phase Change Dynamic Processes in a Flat Micro Heat Pipe

Simulation and Experimental Study of Two-Phase Gas-Liquid Behavior in Two-Dimensional Porous Medium Based on Lattice Boltzmann Method

Experimental Study on the Heat Transfer Performance of Pump-assisted Capillary Phase-change Loop

Numerical investigation on transient and steady phase change heat transfer in the evaporator of a loop heat pipe

3D Heat Transfer Analysis in a Loop Heat Pipe Evaporator with a Fully Saturated Wick

Interfacial Analysis and Development of Phase Change Models for Condensation in Openfoam

Interfacial Analysis and Development of Condensation Models with OpenFOAM

Simulation of a two-phase loop thermosyphon using a new interface-resolved phase change model

Development of an OpenFOAM Solver for Numerical Simulations of Shell-and-tube Heat Exchangers Based on Porous Media Model

Three-Dimensional Numerical Study on the Flow and Heat Transfer in Wick of Loop Heat Pipe

Experimental studies on a high performance compact loop heat pipe with a square flat evaporator

Heat Transfer in Loop Heat Pipe’s Wick: Effect of Porous Structure Parameters

Numerical Method for Gas-Liquid Two-Phase Flow with Phase Change Heat Transfer Considering Compressibility Using OpenFOAM

Experimental study on a novel loop heat pipe with both flat evaporator and boiling pool

A heat transfer model for liquid film boiling on micro-structured surfaces

A Lattice Boltzmann Model for Liquid-Vapor-solid Flow with Thermal Phase Change