Abstract:Introducing nanotwins into materials is one of the important strengthening methods to achieve the synergistic improvement of strength and ductility. The anisotropic mechanical behaviors of nanotwinned materials have been widely studied by experimental and computational methods. The dominant deformation mechanisms about dislocation slippages can be effectively switched among three modes, and controlled by twin spacing and the angle between twin boundaries (TBs) orientation and loading direction. Particularly, most of previous researches mainly focused on the deformation mechanisms during the plastic flow stage and researchers paid little attention on the anisotropic characteristics of TBs at the elastic stage which are also essential to manufacture the high-performance materials. Therefore, this study is aiming to systemically investigate the anisotropic effect of TBs both on the elastic and plastic stages within the single crystalline or polycrystalline by molecular dynamics (MD) simulations. It is revealed that, when the loading direction is parallel to twin planes, the introduction of TBs in single crystalline models will significantly affect the characteristics of atomic bond rotation and elongation dominated elastic deformation, which can alter the Poisson's ratio of materials, generate elastic-softening behavior and inhomogeneous elastic deformation. At the plastic flow stage, the deformation mechanism transforms from trans-twin dislocation slippage into the coexistence of Hard Mode I and threading dislocation slippage (Hard Mode II) when the loading direction changes from parallel to perpendicular direction with respect to TBs. However, both the elastic and plastic behaviors are less sensitive to TBs in vertical direction. Moreover, the dislocation segments at the conjunction of trans-twin dislocation play a momentous role in enhancing material strength. The results for polycrystalline models are consistent with that of single crystalline ones. These findings are expected to be beneficial for the development of high-performance nanostructured materials for structural and functional applications by strain engineering and defect regulation.

Twin mechanical metamaterials inspired by nano-twin metals: Experimental investigations

Twin Mechanical Metamaterials

In Situ Nanomechanical Testing of Twinned Metals in a Transmission Electron Microscope

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Atomistic investigation on the anisotropic elastic and plastic responses of nanotwinned metals

Design and Analysis of a Tunable Multistable Mechanical Metamaterial

Atomistic insights into the synergistic effect of nanotwins and nano-precipitates on the mechanical behavior of superalloys

3D Tiled Auxetic Metamaterial: A New Family of Mechanical Metamaterial with High Resilience and Mechanical Hysteresis

Mechanical Behaviors Regulation of Triply Periodic Minimal Surface Structures with Crystal Twinning

Fiber‐Reinforced Energy‐Absorbing and Vibration‐Isolating Mechanical Metamaterials Based on Triply Periodic Minimal Surfaces

Twin‐Structured Graphene Metamaterials with Anomalous Mechanical Properties

Mechanical behavior analyses of 4D printed metamaterials structures with excellent energy absorption ability

Design and characterization of novel bi-directional auxetic cubic and cylindrical metamaterials

Mechanical metamaterials with programmable compression-twist coupling

Anisotropic Mechanical Properties and Deformation Mechanisms of Nanotwinned Ni and Ni Alloys With Extremely Fine Twin Boundary Spacings

Influence of load orientations with respect to twin boundaries on the deformation behaviors of high-entropy alloy nanocrystals

Anti-twinning in nanoscale tungsten

Magneto-Mechanical Metamaterials with Widely Tunable Mechanical Properties and Acoustic Bandgaps

Theory of transformation-mediated twinning

Mechanical Metamaterials and Their Engineering Applications

Deformation mechanisms in nanotwinned metal nanopillars