Abstract:In the era of Industry 4.0, researchers in various fields have paid special attention to digital twin technology, which can realize real-time mapping between virtual and physical space. In this paper, a new general framework for response prediction of composite structures based on digital twins is proposed. The tensile testing process of standard samples of carbon fiber-reinforced composites (CFRCs) is used as the twinning object. Moreover, the development of a digital twin and composite structural response prediction based on the generic framework is demonstrated. First, standard CFRC tensile samples are prepared, and relevant raw data are acquired. Subsequently, the microscopic parameters of the standard CFRC tensile samples are obtained by scanning electron microscopy. Geometric measurements are performed to determine the macroscopic parameters, which, together with the material properties of carbon fibers and matrix, are used as the input parameters of a multi-scale virtual physical model (MVPM). The MVPM is used to simulate the actual tensile process using the multi-scale finite element method (FEM). Then, the real-time measurement data from the physical space are transferred to the virtual space through sensors. At the same time, the computationally time-consuming MVPM is downscaled to meet the real-time requirements for the online deployment of the digital twins. In this paper, the backpropagation (BP) neural network model is used to train the input and output parameter data of the MVPM to obtain a reduced-order model (ROM). In addition, to improve the prediction accuracy of the structural response of the digital twin, three model update strategies (MUS) of the ROM are proposed: 1) MUS 1 is based on the ROM, adding the tested sample historical data for the training model update strategy; 2) MUS 2 is based on the ROM 1, adding the measured real-time data of the current sample for training and updating to obtain the ROM 2; 3) MUS 3 is based on the predicted structural response data of ROM 2. Combined with the real-time measured data of the current sample, a higher-order fitting real-time correction is performed to obtain ROM 3. Finally, the tensile process of five CFRC standard samples is demonstrated based on the structural response prediction of the digital twin. The strain response prediction and contour visualization of the whole sample is achieved with limited strain gauge data. By comparison, MUS 2 has higher prediction accuracy than MUS 1 after adding the real-time measured data of the current sample. The prediction errors of MUS 1 and MUS 2 at the later stages of the stretching process are within 10%, with the minimum error of MUS 1 being 15.73% and that of MUS 2 being 3.36%. With the correction of high-order fitting, MUS 3 can achieve a stable prediction error of 20% or less in future moments, and the error can be reduced to less than 5%, reaching a minimum error of 0.44% at the critical tail section near tensile failure.

Advanced Corrective Training Strategy for Surrogating Complex Hysteretic Behavior

Prediction Method of Structural Static Performance Based on Data Learning

Structural Surrogate Model and Dynamic Response Prediction with Consideration of Temporal and Spatial Evolution: an Encoder–Decoder ConvLSTM Network

A Surrogate Modeling Framework for Aircraft Assembly Deformation Using Triplet Attention-Enhanced Conditional Autoencoder

Towards Predictive Maintenance of a Heavy-Duty Gas Turbine A New Hybrid Intelligent Methodology for Performance Simulation

Adaptive compensation using long short‐term memory networks for improved control performance in real‐time hybrid simulation

A New General Framework for Response Prediction of Composite Structures Based on Digital Twin with Three Effective Error Correction Strategies

Hybrid Modelling by Machine Learning Corrections of Analytical Model Predictions towards High-Fidelity Simulation Solutions

A Deep Ensemble Learning-Driven Method for the Intelligent Construction of Structural Hysteresis Models

Pre-trained transformer model as a surrogate in multiscale computational homogenization framework for elastoplastic composite materials subjected to generic loading paths

Research on deformation prediction of CFETR multi-purpose overloaded robot based on real-time structural simulator

Transient surrogate modeling of modally reduced structures with discontinuous loads and damping

M-LFM: a multi-level fusion modeling method for shape-performance integrated digital twin of complex structure

Hybrid enhanced Monte Carlo simulation coupled with advanced machine learning approach for accurate and efficient structural reliability analysis

Finite Element-Neural Network Hybrid Modeling of Complex Dynamic Systems

An efficient method based on shear models for structural seismic response prediction considering hysteretic characteristics

Accelerating Analysis for Structure Design via Deep Learning Surrogate Models

Data-driven fatigue crack propagation and life prediction of tubular T-joint: A fracture mechanics based machine learning surrogate model

Active Closed-loop Transfer Learning Based Surrogate Models for Telescopic Boom Forklift Optimization

Simulation-Driven Universal Surrogates of Coupled Mechanical Systems: Real-Time Simulation of a Forestry Crane

A novel domain decomposition-based model for efficient dynamic predictions of large composite machine tools