Abstract:Winglet vortex generators (WVGs) mounted inside a circular tube, generate longitudinal vortices and offer increased turbulence level with a comparatively lower pressure penalty for a higher heat exchange performance. In this study, the thermal enhancement and flow structure arising from radially-arrayed winglets mounted at different attack and inclination angles, as well as different winglet lengths, are analyzed by CFD simulation. The flow and heat transfer behaviors are presented in the turbulent flow region for air flow, with Reynolds number ranging from 6000 to 27,000. Vortex generators are arranged inside the tube as a series of four rings, with each ring having 4 WVGs on the inner surface of a circular tube. The present research investigates the characteristics of WVGs which include four winglet inclination angles (α = 0°, 10°, 20° and 30°), five winglet attack angle (β = 0°, 10°, 20°, 30°, and 45°), and three winglet lengths (L = 10 mm, 15 mm, 20 mm). The data shows that winglets in a tube result in a considerable enhancement of Nusselt number and friction factor. It is found that Nusselt number and friction factor augment with the increase of attack angle or length, yet declines with the increase of inclination angle. The maximum of Nu is 86.88, at L = 20 mm, PR = 4.8, α = 0°, and β = 45°. The largest Nusselt number ratio, Nu/Nu0, defined as a ratio of augmented Nusselt number to the Nusselt number for fully developed smooth flow is 136%, which was obtained at a lower Reynolds number (Re = 6000). The results also illustrated that WVGs could generate longitudinal and transverse vortices to induce both impingement flow and recirculation zone leading to higher heat transfer and comparatively lower pressure drop. Nusselt number contours reveal that the wake zone behind WVGs displays the intensity of heat transfer along the tube.

Analysis of enhanced turbulent heat transfer in a sharp turn channel having novel designed endwall with longitudinal vortex generator

Experimental Study of Augmented Heat Transfer on the Endwall of a Square-Sectioned Sharp-Turn Channel Using Novel-Type Vortex Generators

Experimental evaluation of longitudinal and transverse vortex generators on the endwall of a serpentine passage

Experimental study on the augmented Nusselt number of the endwall through a square-sectioned sharp-turn channel using novel heat exchanger

Heat Transfer Enhancement in Rectangular Narrow Channel with Longitudinal Vortex Generators

HEAT TRANSFER ENHANCEMENT IN A CHANNEL WITH LONGITUDINAL VORTEX GENERATORS AND FIELD SYNERGY PRINCIPLE ANALYSIS

Thermal performance augmentation of microchannel using curved rectangular winglet vortex generators having rectangular perforation

Heat Transfer Enhancement in Rectangular Narrow Channel with Periodically Mounted Longitudinal Vortex Generators on One Sidewall

Experimental Study of Heat Transfer Enhancement in Narrow Rectangular Channel with Longitudinal Vortex Generators

Numerical Investigation and Analysis of Heat Transfer Enhancement in Channel by Longitudinal Vortex Based on Field Synergy Principle

Effect of Divider Wall-to-end Wall Distance on the Vortical Structures and Heat Transfer Characteristics of Two-Pass Channel Using Topological Analysis

Novel self-join winglet vortex generators for enhanced heat transfer of turbulent airflow in round tubes

Numerical Study on Laminar Convection Heat Transfer in a Rectangular Channel with Longitudinal Vortex Generator . Part A : Verification of Field Synergy Principle

The mechanism of heat transfer enhancement using longitudinal vortex generators in a laminar channel flow with uniform wall temperature

Numerical study on laminar convection heat transfer in a channel with longitudinal vortex generator. Part B: Parametric study of major influence factors

Numerical study of fluid flow and heat transfer in a flat-plate channel with longitudinal vortex generators by applying field synergy principle analysis

Effects of Novel Turning Vanes on Pressure Loss and Tip-Wall Heat Transfer in an Idealized U-bend Channel

Study on flow and heat transfer characteristics of vapor-liquid two-phase flow in a narrow rectangular channel with longitudinal vortex generators

Numerical study of heat transfer and flow behavior in a circular tube fitted with varying arrays of winglet vortex generators

Numerical investigation of heat transfer using a novel punched vortex generator

Advances and Outlooks of Heat Transfer Enhancement by Longitudinal Vortex Generators