Abstract:A cellular automaton (CA) model coupled with momentum, mass and heat transport models was developed to investigate equiaxed and columnar dendritic growth of Fe-0.82 wt%C alloy under four elaborately designed forced flows. During the iterative solution, the evolution of solidification interface and the solute diffusion in solid phase were explicitly tracked and solved, while other transport equations were implicitly solved in staggered grids with the block-corrected TDMA approach. The self-developed codes show a good performance in predicting dendritic growth and melt flow and temperature fields according to the comparisons with LGK analytical model and commercial software. The growth behavior of dendrites under melt flow is determined by the competition between bringing in solute enriched melt from upstream side and carrying away solute rejected at interfaces. The growth of equiaxed dendrites is promoted at the upstream side and inhibited at the downstream side, which becomes more significant with the increase of inlet velocity and the decrease of melt undercooling. Meanwhile, the oblique flow plays an important role in the growth of arms at the downstream side and alleviates the inhibited growth at the lower melt undercooling. Columnar dendrites are under inhibited growth in sequence along the flow direction, except that those near the outlet are promoted under weaker melt flow. Secondary dendrite arms firstly well formed at left sides of columnar dendrites become fatter and better developed compared with those without flow, although those near the upstream side are difficult to be developed. Under the circular flow condition, columnar dendrites at the bottom wall of the modeling domain firstly grow faster than those symmetrically in the right wall, and then become slower as the solidification proceeds under stronger melt flow. Moreover, the effect of melt flow on dendritic growth becomes more significant under the lower melt undercooling condition for equiaxed dendrites and the weaker cooling condition for columnar dendrites. In addition, compared with the effect on the temperature distribution, the effect of the melt flow on the solute distribution around columnar dendrites governs their growth. (C) 2014 Elsevier B.V. All rights reserved.

Effects of Shear Flows on Columnar Dendritic Microstructure During Rapid Solidification of IN718 Alloy: A Cellular Automaton-Lattice Boltzmann Modeling Study

The effect of shear flow on the dendritic characteristics

Orientation Dependence of Columnar Dendritic Growth with Sidebranching Behaviors in Directional Solidification: Insights from Phase-Field Simulations

Multi-scale Simulation of Dendrite Growth for Direct Energy Deposition of Nickel-Based Superalloys

Effect Of Pulling Velocity On Dendrite Arm Spacing In Steady-State Directionally Solidified Transparent Organic Alloy By Numerical Simulation

Dendritic Growth of High Carbon Iron-Based Alloy under Constrained Melt Flow

Concentration and Fluid Flow Effects on Kinetics, Dendrite Remelting and Stress Accumulation Upon Rapid Solidification of Deeply Undercooled Alloys

Simulation of Dendritic Deformation Induced by Convection in Alloy Solidification

Morphological determination of forced shear flow rate during directional solidification of succinonitrile-1%salol alloy

Convective effects on columnar dendritic solidification -- A multiscale dendritic needle network study

Effect of Fluid Flow on Solidified Equiaxed Dendrite Morphology Evolution Based on Phase Field - Lattice Boltzmann Method

Influence of Forced Flow on the Dendritic Growth of Fe-C Alloy: 3D Vs 2D Simulation

Microstructure evolution during dendrite coarsening in an isothermal environment: 3-D cellular automaton modeling and experiments

Study of Dendrite Growth with Natural Convection in Superalloy Directional Solidification Via a Multiphase-Field-lattice Boltzmann Model

Competitive Dendrite Growth During Directional Solidification of a Transparent Alloy: Modeling and Experiment.

A Numerical Study of Dendrite Growth and Microstructure Transition in a Non-Equilibrium Solidification

Study of Dendrite Growth Under Forced Convection in Superalloy Solidification by Multiphase Field Coupled Lattice Boltzmann Method

Interaction of Local Solidification and Remelting During Dendrite Coarsening - Modeling and Comparison with Experiments

Melt flow-induced mechanical deformation of dendrites in alloy solidification: A coupled thermal fluid - solid mechanics approach

Dendritic Growth under Natural and Forced Convection in Al-Cu Alloys: from Equiaxed to Columnar Dendrites and from 2D to 3D Phase-Field Simulations

Simulation of Nh4cl-H2o Dendritic Growth in Directional Solidification