Abstract:It has been reported that the pavement performance predicted by the current mechanistic-empirical pavement design shows low or no sensitivity to subgrade and unbound layers. This issue has raised wide attention. Targeting this problem, this paper summarizes the process used by the authors to find better models of the influence of subgrade and unbound base course layers on the performance of flexible and rigid pavements. A comprehensive literature review is first conducted and the findings are categorized. It is found that the resilient modulus, permanent deformation, shear strength, and erosion are key factors. In particular, the properties that provide greater sensitivity are (1) the moisture-dependency of the modulus, shear strength, and permanent deformation; (2) stress-dependency of the modulus and permanent deformation; and (3) cross-anisotropy of the modulus. A number of unbound layer/subgrade models have been located and categorized. Three criteria are developed to identify the candidate models in terms of the degree of susceptibility, degree of accuracy, and ease of development. The first two criteria are used to evaluate the collected unbound layer/subgrade models, while associated development and implementation issues are planned as subsequent work. Two models that the authors previously developed are selected as examples to illustrate the improvement of the performance prediction, including the moisture-sensitive, stress-dependent, and cross-anisotropic modulus model for unbound layers and stress-dependent mechanistic-empirical permanent deformation model for unbound base layers. These two models are verified through laboratory tests and numerical simulations. Moreover, they are compared to their counterparts in the AASHTOWare Pavement ME Design. The advantages of accuracy and sensitivity to the operational conditions (e.g. moisture, traffic stress, and load-induced/particle-induced anisotropy) are obvious. In addition to these two models, the development of the shear strength model and erosion model are sketched. The candidate models need further development and implementation, which address issues such as hierarchical inputs, calibration/validation, and implementation. These are the on-going and planned work on this topic to better incorporate the influence of subgrade and unbound layers so as to contribute to the improvement of pavement designs.

Fractional Viscoelastic Models for Asphalt Concrete: from Parameter Identification to Pavement Mechanics Analysis

Micromechanics Modeling of Viscoelastic Asphalt-Filler Composite System with and Without Fatigue Cracks

Implementation of Pseudo J-Integral Based Paris' Law for Fatigue Cracking in Asphalt Mixtures and Pavements

Energy-Based Kinetics Approach for Coupled Viscoplasticity and Viscofracture of Asphalt Mixtures

Fractional viscoelastic constitutive modelling of real-time strain response for asphalt pavement composites subjected to simulating wheel loadings

Nonlinear Viscoelasticity and Viscoplasticity Characteristics of Virgin and Modified Asphalt Binders

Viscoelastic Fracture Mechanics-Based Fatigue Life Model in Asphalt-Filler Composite System

Elastoplastic Analysis of Asphalt Concrete Pavement

Mechanistic-empirical Models for Better Consideration of Subgrade and Unbound Layers Influence on Pavement Performance

Discrete element modelling of mechanical response of crumb rubber-modified asphalt pavements under traffic loads

Improved Methodology to Evaluate Fracture Properties of Warm-Mix Asphalt Using Overlay Test

Fractional Derivative Viscoelastic Response Model for Asphalt Binders

Dynamic Response of Viscoelastic Asphalt Pavement under Non-uniform Moving Load

Viscoelastic Damage Characteristics of Asphalt Mixtures Using Fractional Rheology

Viscoelastic Analysis of Asphalt Concrete with a Digitally Reconstructed Microstructure

Coupled Mechanical and Kinetic Modeling of Recovery in Asphalt Mixtures

Analysis on Mechanical Response of Asphalt Pavement Structure Based on 3 D Viscoelastic Finite Element Method

Characterization of Linear Viscoelastic Behavior of Asphalt Concrete Using Complex Modulus Model

A Fractional Creep Constitutive Model Considering the Viscoelastic–Viscoplastic Coexistence Mechanism

A Nonlinear Fractional Viscoelastic-Plastic Creep Model of Asphalt Mixture

Numerical Simulation of Mechanical Response Analysis of Asphalt Pavement under Dynamic Loads with Non-Uniform Tire-Pavement Contact Stresses