Abstract:In this paper, an ultra-wide-angle and broadband metamaterial absorber with a monopole top loading structure (MA-MTLS) was proposed. The resistive films printed on the dielectric are on the top layer. The dielectric square cylindrical shells with resistive films on the outside are in the middle, and a metal plate is on the bottom layer. The whole structure can be regarded as a top loading monopole antenna that has a good omnidirectional radiation capability. According to reciprocity, when a composite structure is used as an absorber, it will have a good absorption performance. The impedance matching characteristics were demonstrated by Smith chart and equivalent circuit, and then, the absorption performance was optimized. The simulated results show that the absorption of the MA-MTLS is more than 90% under TM polarized waves of 3.6–13.8 GHz as the incident angle changes from 0° to 80°. When the incident angle increases to 83°, the absorption is higher than 80% in the frequency band of 3.7–14.5 GHz. At the stage of experiment, the dielectric substrate was made by three-dimensional printing technology, the resistive films on the top layer were printed using screen printing techniques, and the resistive films on the outside of the square cylindrical shells were completed by pasting. The consistency between the experimental results and simulation data indicates that the design method is feasible and has good application prospects.

A Monopole-Based Wideband Absorber for Ultralarge Angles

Large-Area, Omnidirectional Metasurface Exhibiting Unpolarized Broadband Absorption

Design of an Absorber for Large Incident Angles with Antenna Reciprocity

Ultrabroadband Double-Sided and Dual-Tuned Active Absorber for UHF Band

Broadband and Omnidirectionally Matched Absorber for a Discrete Source

Design of a Broadband Absorber Based on Antenna Reciprocity

Backend-Balanced-Impedance Concept for Reverse Design of Ultra-Wideband Absorber

Design and Analysis of a Dynamically Tunable Ultra-Broadband Flexible Microwave Absorber

Development of a Resistor-Loaded Ultrawideband Absorber with Antenna Reciprocity

Wide-Angle, Ultra-Wideband, Polarization-Independent Circuit Analog Absorbers

Ultrawideband Microwave Absorber Conformable on Nondevelopable Curved Surfaces Based on the Hauberk Structure

Ultra-wideband absorber based on graphene surface with polarization insensitivity under large angles

Ultra-wide-angle and broadband metamaterial absorber based on monopole top loading antenna and its reciprocity

A Hierarchical Impedance Matching Approach for Ultra-wideband Absorber With Wide Angular Stability

Design of A Metamaterial Absorber With Ultra-Wide Angle Incidence

Ultra‐Broadband Wide‐Angle Polarization‐Independent Enhanced Absorber with Ultraviolet to Far‐Infrared Absorption Performance

Dual-Band, Polarization-Insensitive, And Wide-Angle Ultra-Thin Metamaterial Absorber With Interference Theory Analysis

A tightly‐coupled planar absorber with broadband and wide‐angle

Ultra-broadband, Wide-angle Microwave Metamaterial Absorber Based on 3D FSS Array

An Ultrawideband and High-Absorption Circuit-Analog Absorber With Incident Angle-Insensitive Performance