Abstract:The design and development of cost-effective and increased methanol permeable and proton-conductive membranes are critical concerns in the fabrication of polymeric electrolyte membranes (PEM). A solution-casting process was used to create a low-cost PEM based on sulfonated polyvinyl chloride (SPVC)-Polymethyl methacrylate (PMMA) blended with varying concentrations of Poly(sodium 4-styrenesulfonate) (PSS). The contact angle, oxidative stability, swelling ratio, water uptake, and methanol uptake of SPVC/PMMA/PSS membranes were investigated as a function of PSS molar ratio. FT-IR examination, 1 H NMR spectra, Raman spectroscopy, X-ray diffraction, thermogravimetric analysis (TGA), and scanning electron microscope micrographs were additionally utilized for confirming the chemical structure, morphology, and thermal stability of SPVC/PMMA/PSS membranes. Furthermore, the ion exchange capacity (IEC), proton conductivity, and methanol permeability of SPVC/PMMA/PSS membranes were investigated depending on the PSS concentration. The results showed a significant increase in proton conductivity from 1.80 × 10 –2 for SPVC/PMMA/1%PSS to 4.7 × 10 –2 S/cm for SPVC/PMMA/5%PSS at ambient temperature. On the other hand, the methanol permeability (P = 8.53 × 10 –8 cm 2 /s) was noticeably lower than that of Nafion 117 (3.39 × 10 –6 cm 2 /s). Additionally, the IEC of the manufactured membrane was 1.38 ± 0.7 meq g −1 for SPVC/PMMA/5%PSS compared to 0.91 meq g −1 for Nafion 117 membranes. The maximum water uptake of the synthesized membranes was 48.37 ± 2.27%, whereas Nafion 117 membrane absorption was 65.44%. According to conductivity studies and the membrane efficiency factor, the ideal PSS content in a polymer matrix is 4 wt.%. Finally, the developed SPVC/PMMA/PSS polyelectrolytic membranes show improvements in essential properties such as methanol permeability, proton conductivity, and IEC when combined with low-cost materials, making them an attractive contender as PEM for DMFCs.

Preparation and investigation of high-temperature proton exchange membranes based on phosphoric acid doped imidazolium polysilsesquioxane crosslinked poly(vinyl chloride)

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Benzimidazole Grafted Polybenzimidazole Cross-Linked Membranes with Excellent PA Stability for High-Temperature Proton Exchange Membrane Applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

HT-PEMs based on carbazole grafted polybenzimidazole with high proton conductivity and excellent tolerance of phosphoric acid

Enhancing proton conduction of high temperature proton exchange membranes based on carbon dots doped polyvinyl chloride nanofibers

Gel-state Polybenzimidazole Proton Exchange Membranes with Flexible Alkyl Sulfonic Acid Side Chains for a Wider Operating Temperature Range (25–240 °C)

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

Achieving high power density of 859.5 mW cm−2: Self-cross-linking polymer membrane based on rigid fluorenone structure

Alkali-free quaternized polybenzimidazole membranes with high phosphoric acid retention ability for high temperature proton exchange membrane fuel cells

Preparation and molecular simulation of grafted polybenzimidazoles containing benzimidazole type side pendant as high-temperature proton exchange membranes

Halloysite Ionogels Enabling Poly(2,5-Benzimidazole)-based Proton-Exchange Membranes for Wide-Temperature-range Applications

Introduction of polymeric ionic liquids containing quaternary ammonium groups to construct high-temperature proton exchange membranes with high proton conductivity and stability

Preparation of proton exchange membrane with intrinsic micropores constructing efficient ion transport channels based on segmented copolymer (sulfonated polyimide)

Double cross-linked 3D layered PBI proton exchange membranes for stable fuel cell performance above 200 °C

Design of sepiolite-supported ionogel-embedded composite membranes without proton carrier wastage for wide-temperature-range operation of proton exchange membrane fuel cells

Constructing high temperature proton exchange membranes with sandwich structure based on graphene oxide nanosheets and electrospinning polyvinyl chloride nanofibers

Quaternary ammonium-biphosphate ion-pair based copolymers with continuous H+ transport channels for high-temperature proton exchange membrane

Investigation on sulfonated PVC/polymethyl methacrylate (PMMA)/polystyrene sulfonate (PSS) polymer blends as proton-conducting membrane