Abstract:Abstract Uncontrollable dendrite growth resulting from the non-uniform lithium ion (Li + ) flux and volume expansion in lithium metal (Li) negative electrode leads to rapid performance degradation and serious safety problems of lithium metal batteries. Although N-containing functional groups in carbon materials are reported to be effective to homogenize the Li + flux, the effective interaction distance between lithium ions and N-containing groups should be relatively small (down to nanometer scale) according to the Debye length law. Thus, it is necessary to carefully design the microstructure of N-containing carbon materials to make the most of their roles in regulating the Li + flux. In this work, porous carbon nitride microspheres (PCNMs) with abundant nanopores have been synthesized and utilized to fabricate a uniform lithiophilic coating layer having hybrid pores of both the nano- and micrometer scales on the Cu/Li foil. Physically, the three-dimensional (3D) porous framework is favorable for absorbing volume changes and guiding Li growth. Chemically, this coating layer can render a suitable interaction distance to effectively homogenize the Li + flux and contribute to establishing a robust and stable solid electrolyte interphase (SEI) layer with Li-F, Li-N, and Li-O-rich contents based on the Debye length law. Such a physical-chemical synergic regulation strategy using PCNMs can lead to dendrite-free Li plating, resulting in a low nucleation overpotential and stable Li plating/stripping cycling performance in both the Li‖Cu and the Li‖Li symmetric cells. Meanwhile, a full cell using the PCNM coated Li foil negative electrode and a LiFePO 4 positive electrode has delivered a high capacity retention of ∼ 80% after more than 200 cycles at 1 C and achieved a remarkable rate capability. The pouch cell fabricated by pairing the PCNM coated Li foil negative electrode with a NCM 811 positive electrode has retained ∼ 73% of the initial capacity after 150 cycles at 0.2 C.

Biomass-Derived Anion-Anchoring Nano-CaCO3Coating for Regulating Ion Transport on Li Metal Surface

Biomass-Derived Anion-Anchoring Nano-CaCO 3 Coating for Regulating Ion Transport on Li Metal Surface

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

Coupling a Three-Dimensional Nanopillar and Robust Film to Guide Li-Ion Flux for Dendrite-Free Lithium Metal Anodes

Ultrafine Titanium Nitride Sheath Decorated Carbon Nanofiber Network Enabling Stable Lithium Metal Anodes

Single Iron Atom Anchored on ZIF‐8 Derived Carbon Framework to Directionally Regulate Lithium Deposition with Minimum Nucleation Overpotential

Regulating Lithium Nucleation and Deposition via MOF‐Derived Co@C‐Modified Carbon Cloth for Stable Li Metal Anode

CuO Nanofilm-Covered Cu Microcone Coating for a Long Cycle Li Metal Anode by in Situ Formed Li2O

Nano-channel-based physical and chemical synergic regulation for dendrite-free lithium plating

Regulating Lithium Nucleation Via CNTs Modifying Carbon Cloth Film for Stable Li Metal Anode

Regulating Li‐ion Flux Through a Dense Yet Highly Ionic Conductive Interlayer for Stable Li Deposition

Binary metal oxide anchored into dense N-doped CNTs arrays: Concerted pseudocapacitance and diffusion behavior for long-cyclic Li-ion half/full batteries

Ion-regulating Hybrid Electrolyte Interface for Long-life and Low N/P Ratio Lithium Metal Batteries

Superior Stability Secured by a Four-Phase Cathode Electrolyte Interface on a Ni-Rich Cathode for Lithium Ion Batteries

Synergistic Modulation of Li Nucleation/growth Enabled by CNTs-wrapped Lithiophilic CoP/Co2P Decorated Hollow Carbon Polyhedron Host for Stable Lithium Metal Anodes

Suppressing Lithium Dendrite Growth with Nanoparticle-Dispersed Colloidal Electrolytes

Nano-Cu-embedded carbon for dendrite-free lithium metal anodes

Regulating Uniform Li Plating/Stripping via Dual‐Conductive Metal‐Organic Frameworks for High‐Rate Lithium Metal Batteries

Regulating Lithium Nucleation and Deposition on Carbon Cloth Decorated with Vertically Aligned Ag-doped MnO2 2 Nanosheet Arrays for Dendrite-Free Lithium Metal Anode

Efficient trapping of lithium-ions by branched amine for stable lithium metal anodes

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries