Abstract:Quadrotors with the ability to perch on moving inclined surfaces can save energy and extend their travel distance by leveraging ground vehicles. Achieving dynamic perching places high demands on the performance of trajectory planning and terminal state accuracy in SE(3). However, in the perching process, uncertainties in target surface prediction, tracking control and external disturbances may cause trajectory planning failure or lead to unacceptable terminal errors. To address these challenges, we first propose a trajectory planner that considers adaptation to uncertainties in target prediction and tracking control. To facilitate this work, the reachable set of quadrotors' states is first analyzed. The states whose reachable sets possess the largest coverage probability for uncertainty targets, are defined as optimal waypoints. Subsequently, an approach to seek local optimal waypoints for static and moving uncertainty targets is proposed. A real-time trajectory planner based on optimized waypoints is developed accordingly. Secondly, thrust regulation is also implemented in the terminal attitude tracking stage to handle external disturbances. When a quadrotor's attitude is commanded to align with target surfaces, the thrust is optimized to minimize terminal errors. This makes the terminal position and velocity be controlled in closed-loop manner. Therefore, the resistance to disturbances and terminal accuracy is improved. Extensive simulation experiments demonstrate that our methods can improve the accuracy of terminal states under uncertainties. The success rate is approximately increased by $50\%$ compared to the two-end planner without thrust regulation. Perching on the rear window of a car is also achieved using our proposed heterogeneous cooperation system outdoors. This validates the feasibility and practicality of our methods.

Trajectory Estimation of a Flying Robot with a Single Ranging Beacon and Derived Velocity Constraints

Learning Accurate and Robust Velocity Tracking for Quadrupedal Robots

An adaptive trajectory prediction method for ping-pong robots

Real-Time Trajectory Planning for Aerial Perching.

Alternating Minimization Based Trajectory Generation for Quadrotor Aggressive Flight

Accurate Real-Time Ball Trajectory Estimation with Onboard Stereo Camera System for Humanoid Ping-Pong Robot

A Trajectory-based Flight Assistive System for Novice Pilots in Drone Racing Scenario

Visibility-aware Trajectory Optimization with Application to Aerial Tracking

Designing Reduced Beacon Trajectory for Sensor Localization

Optimal trajectory generation for time-to-contact based aerial robotic perching

Velocity space based concurrent obstacle avoidance and trajectory tracking for mobile robots

Adaptive Trajectory Tracking of Nonholonomic Mobile Robots Using Vision-Based Position and Velocity Estimation

Trajectory Optimization to Enhance Observability for Bearing-Only Target Localization and Sensor Bias Calibration

A Smartphone RTK Algorithm Based on Velocity Constraint

Optimization-based Trajectory Tracking Approach for Multi-rotor Aerial Vehicles in Unknown Environments

Reactive Trajectory Generation for Multiple Vehicles in Unknown Environments With Wind Disturbances

Novel Trajectory Optimization Algorithm of Vehicle-borne LiDAR Mobile Measurement System

Estimation and Adaption of Indoor Ego Airflow Disturbance with Application to Quadrotor Trajectory Planning

RAPTOR: Robust and Perception-Aware Trajectory Replanning for Quadrotor Fast Flight

Image-based estimation, planning, and control for high-speed flying through multiple openings

Perching on Moving Inclined Surfaces using Uncertainty Tolerant Planner and Thrust Regulation