Abstract:A comprehensive 1-dimensional/1.5-dimensional hybrid mathematical model is developed for predicting NOx emission of a circulating fluidized bed (CFB) combustor under broader operating parameters. In this model, the local gas-solid fluidization state and gas/heat transfer conditions in different regions of a CFB combustor are specifically considered. Some two- or three-dimensional problems, such as bubble breakage over dense bed surface, secondary air injection, core-annular flow structure, and particle clusters in freeboard, are also taken into account in 1-D/1.5-D modeling. The detailed chemical kinetic mechanism is creatively used to describe the homogeneous reaction system towards CFB combustion simulation. In addition to operating parameters and fuelspecific inputs, no other model parameters can be trimmed from case to case. This integral CFB model is validated against the field test data obtained from three commercial CFB boilers with different capacities, some of which are first disclosed. Favorable comparisons are obtained between the predicted and measured results, involving particle size distributions, temperature and pressure profiles, and NOx/SO2 emissions. The final NO emission, as well as gas profiles, are somewhat different among the cases, which may be attributed to the discrepancy in boiler structure, fuel properties, and operating conditions. Further sensitivity analysis indicates that the proportion of volatile-N in total fuel-N, char combustion reactivity, and char-NO reactivity significantly impact the NOx emission for CFB combustion. Meanwhile, the gas-solid fluidization state also plays an essential role in the NOx emission and the in-furnace combustion efficiency, such as the gas flow distribution between phases, bubble size, secondary air penetration depth, etc. However, the NOx emission seems insensitive to the particle external gas mass transfer coefficients.

A Combined NOx Emission Prediction Model Based on Semi-Empirical Model and Black Box Models

NOx Prediction Model for Multi-coal Admixing Combustion in Boiler

Data Driven based Dynamic Correction Prediction Model for NOx Emission of Coal Fired Boiler

Prediction and Minimization of NOx Emission in a Circulating Fluidized Bed Combustor: A Comprehensive Mathematical Model for CFB Combustion

Dynamic NOx Emission Prediction Based on Composite Models Adapt to Different Operating Conditions of Coal-Fired Utility Boilers

NOx emission prediction of coal-fired power units under uncertain classification of operating conditions

NO x emission prediction of coal-fired power units under uncertain classification of operating conditions

Predictions of NOx/N2O Emissions from an Ultra-Supercritical CFB Boiler Using a 2-D Comprehensive CFD Combustion Model

Modeling and optimization of the NO X generation characteristics of the coal-fired boiler based on interpretable machine learning algorithm

Dynamic Prediction of SO2 Emission Based on Hybrid Modeling Method for Coal-Fired Circulating Fluidized Bed

A Deep Graph Convolutional Network Model of NOx Emission Prediction for Coal‐fired Boiler

Modeling and Coordinative Optimization of Nox Emission and Efficiency of Utility Boilers with Neural Network

Predicate Model on NOx Emission of a High Capacity Firing Boiler

A Semi-Empirical NOx Model for LES in Pulverized Coal Air-Staged Combustion

NOx emission reduction of coal‐fired power plants through data‐driven model and particle swarm optimization

Development of a NOx Emission Model with Seven Optimized Input Parameters for a Coal-Fired Boiler

A hybrid NOx emission prediction model based on CEEMDAN and AM-LSTM

Prediction and Minimization of NOx Emission in a Circulating Fluidized Bed Combustor: Improvement of Bed Quality by Optimizing Cyclone Performance and Coal Particle Size

Model Prediction of the Operating Behavior of a Circulating Fluidized Bed Boiler

NO x emission predicting for coal-fired boilers based on ensemble learning methods and optimized base learners