Abstract:The removal of low concentration ammonia-nitrogen in industrial wastewater is necessary before discharged into the environment. In this study, vacuum plate membrane distillation (VPMD) technology was utilized and operating parameters such as pH, feed temperature, vacuum degree, feed flow and time were investigated. Based on the experimental data, the heat and mass transfer mechanism and mathematic model were studied. The experimental results show that low solution pH was significantly beneficial to ammonia-nitrogen removal but permeate flux was nearly changeless. At pH = 4, a removal rate up to 93.33% was achieved. Ammonia-nitrogen mainly exists with NH4+ ions in acidic solution, so only water molecules pass through the membrane to acquire the water product in the permeate side. Increasing the temperature of the solution was disadvantageous to the ammonia-nitrogen removal due to membrane pores expanding and the mass transfer coefficient of NH3 molecules increasing; therefore a low temperature was chosen if possible. Because vapor pressure of the feed solution increases exponentially with temperature and results in membrane surface pressure difference increases, therefore increasing the temperature enhances the permeate flux. Raising the vacuum degree enhanced ammonia removal rate and permeate flux obviously, a vacuum degree of 0.09 MPa was chosen for the experiment. The effect of feed flow rate on ammonia-nitrogen removal instead of permeate flux is weak, the reason is that the boundary layer wears thin when the feed flow rate is increased, which is conducive to permeate flux increasing. In a two-parameter model of Knudsen diffusion, Poiseuille flow was chosen to demonstrate the heat and mass transfers in the process of VPMD in the study. Based on the experimental values of permeate flux, two parameters CK and CP in the model were calculated using a nonlinear fitting method software, which indicated that the Knudsen diffusion model more than the Poiseuille flow model was suitable. The maximum values of the relative average deviation (RAD) and root mean square difference (RMSD) of experimental and calculated values with model equations of the permeate flux at the different temperature, vacuum degree and feed flow rate were no more than 8.7% and 3.20 kg · (m2 · h)-1, respectively.

CFD Model Development and Experimental Measurements for Ammonia–Water Separation Using a Vacuum Membrane Distillation Module

De-ammonification using direct contact membrane distillation – An experimental and simulation study

Water Vapor Effects On Co(2)Separation Of Amine-Containing Facilitated Transport Membranes (Aftms) Module: Mathematical Modeling Using Tanks-In-Series Approach

Simulation and Experimental Investigation of the Vacuum-Enhanced Direct Membrane Distillation Driven by a Low-Grade Heat Source

Computational fluid dynamics based numerical simulations of heat transfer, fluid flow and mass transfer in vacuum membrane distillation process

CFD simulation of heat and mass transport for water transfer through hydrophilic membrane in direct-contact membrane distillation process

Spatial variations of DCMD performance for desalination through countercurrent hollow fiber modules

Novel Design of Liquid Distributors for Vmd Performance Improvement Based on Cross-Flow Membrane Module

Review of Ammonia Recovery and Removal from Wastewater Using Hydrophobic Membrane Distillation and Membrane Contactor

Study on treatment of wastewater with low concentration of ammonia-nitrogen by vacuum plate membrane distillation technology

Mathematical Modeling of Natural Gas Separation Using Hollow Fiber Membrane Modules by Application of Finite Element Method through Statistical Analysis

Numerical Simulation of Cross-Flow Vacuum Membrane Distillation and Characteristics Analysis

Evaluation of Hollow Fiber-Based Direct Contact and Vacuum Membrane Distillation Systems Using Aspen Process Simulation

Performance Analysis and Optimization of Sweep Gas Membrane Distillation Module Using High-Resolution Computational Model and Machine Learning

Theoretical Investigation of Vapor Transport Mechanism Using Tubular Membrane Distillation Module

A Novel Method to Recover Ammonia Loss in Ammonia‐based CO 2 Capture System: Ammonia Regeneration by Vacuum Membrane Distillation

A Method for Experimental Determination of Mass Transfer Resistance Across Membrane in Vmd

Computational fluid dynamics simulation of the stacked module in air gap membrane distillation for enhanced permeate flux and energy efficiency

3D-CFD simulation of hollow fiber direct contact membrane distillation module: Effect of module and fibers geometries on hydrodynamics, mass, and heat transfer

A reduced model for pilot-scale vacuum-enhanced air gap membrane distillation (V-AGMD) modules: Experimental validation and paths for process improvement

Experimental investigation on the hybrid system of mechanical vapor recompression and hollow fiber vacuum membrane distillation applied for wastewater treatment