Abstract:A combined numerical and experimental investigation was conducted on the interaction between a chemically inert solid wall and steady, strained, laminar, premixed atmospheric methane/air flames. Experiments were conducted by using laser Doppler velocimetry for the determination of the axial velocity profiles along the centerline for both the opposed-jet and single jet-wall configurations. The numerical simulations were conducted by solving the conservation equations of mass, momentum, energy, and species along the stagnation streamline by using detailed description of chemical kinetics, molecular transport, and thermal radiation. The numerical solutions were also obtained for both the opposed-jet and single jet-wall configurations, and the effects of the no-slip condition, wall temperature, and H radical recombination at the wall on the flame response were assessed. The experimental data were compared with the numerical predictions obtained by using two independently developed recent C-2 kinetic mechanisms. Results indicate that when the flame is highly strained, it is stabilized close to the wall and the values of the strain rate distribution inside the flame are reduced compared to an opposed-jet flame which is characterized by the same strain rate in the hydrodynamic zone. Furthermore, close to extinction, the conductive heat loss to the wall leads to flame weakening, and a significant reduction of the extinction strain rate is observed compared to the adiabatic systems. It was also found that when heat loss is present, its effect on flame extinction is dominant and traditional arguments of the synergetic effect of stretch and preferential diffusion on flame extinction are not applicable. The studies on flame propagation showed that at low strain rates the flame speed is minimally affected by the wall, since the flame is stabilized closer to the nozzle and the downstream heat losses have a minor effect on the thermochemical processes taking place within the flame zone. This suggests that the single jet-wall configuration can be preferably used as an alternative technique for the determination of laminar flame speeds given that it has a number of advantages over the traditional opposed-jet technique in terms of experimental implementation. (C) 1997 by The Combustion Institute.

The Impinging Wall Effect on Flame Dynamics and Heat Transfer in Non-Premixed Jet Flames

Wall-impinging laminar premixed n-dodecane flames under autoignitive conditions

Analysis of the Quenching Behavior in Impinging Flame: Flow and Thermal Characteristics

Turbulence/flame/wall interactions in non-premixed inclined slot-jet flames impinging at a wall using direct numerical simulation

Large Eddy Simulation Study of Flow Field Characteristics of a Combustor with Two Coaxial Swirlers

Numerical Study of Premixed Flame Dynamics in a Closed Tube: Effect of Wall Boundary Condition

Effect of Wall Heat Transfer on the Dynamics of Premixed Spherical Expanding Flames

Three-dimensional shock–flame interactions: effect of wall friction

Numerical study on supersonic boundary-layer transition and wall skin friction reduction induced by fuel wall-jet combustion

A Study of the Influence of Coflow on Flame Dynamics in Impinging Jet Diffusion Flames

Experimental study of flame morphology and size model of a horizontal jet flame impinging a wall

Wall Effects On The Propagation And Extinction Of Steady, Strained, Laminar Premixed Flames

Effect of Wall Boundary Conditions on the Nonlinear Response of Turbulent Premixed Flames

Experimental study of fire plume temperature and radiant heat flux of a horizontal jet flame impinging a wall

Analysis and Flamelet Modelling for Laminar Pulverised Coal Combustion Considering the Wall Effect

Turbulent flame-wall interactions for flames diluted by hot combustion products

Evaluation of the wall heat flux in filtered premixed turbulent combustion

Experimental Study on the Interactions of Wall Temperature and Impingement Distances and Their Effects on the Impinged Diesel Spray Ignition and Combustion Characteristics

Experimental investigation on flame morphology and wall-attached flame temperature of jet flame under the coupled effect of nozzle angle and nozzle-wall spacing

Experimental and Numerical Analysis of Temperature Distribution on Floating-Wall Flame Tube of Combustor

Interactions of Turbulence and Flame During Turbulent Boundary Layer Premixed Flame Flashback under Isothermal and Adiabatic Wall Conditions Using Direct Numerical Simulation