Abstract:Nonlinear quasi-zero stiffness (QZS) has recently attracted significant attention from the scientific and engineering community as a method for designing low-frequency vibration isolators. However, previous studies primarily used bistable structures and linear springs to provide negative and positive stiffness, respectively, which limits the QZS range and loading capacity of QZS isolators. This work proposes a novel nonlinear stiffness-modulated anti-vibration structure combined with a disc spring group and a volute spring and demonstrates its feasibility for low-frequency vibration isolation under heavy loads. The asymmetrical negative stiffness provided by the disc spring group and hardened positive stiffness provided by the volute spring compensate each other to construct QZS characteristics. Their nonlinearities can weaken each other, which can lead to a wide QZS range. At the QZS position, the disc springs and the volute spring together provide the positive force, which ensures a large loading capacity. By adjusting the design parameters, different QZS characteristics can be conveniently realized. Compared with traditional QZS structures and typical X-shaped structures, the QZS range of the proposed anti-vibration structure can be, respectively, extended by 2.3 and 1.5 times without sacrificing loading capacity. The dynamic equation is derived from the original nonlinear force expression rather than the typical polynomial approximation expression, which can improve the accuracy of the results, especially under large excitation. The displacement transmissibility obtained by the alternating frequency–time harmonic balance method indicates that the proposed anti-vibration structure exhibits the best vibration isolation performance compared with the linear isolators, traditional QZS isolators, and typical X-shaped isolators. In addition, such a stiffness-modulated anti-vibration structure has a higher sensitivity to damping and a lower sensitivity to base excitation amplitude, which makes it more potential for engineering applications. Besides, the validity of the theoretical analysis is verified by static compression tests and dynamic experiments. This work provides a new method for designing and analysing QZS isolators for heavy-duty low-frequency vibration isolation required in many engineering practices.

Cascaded Quasi-Zero Stiffness Nonlinear Low-Frequency Vibration Isolator Inspired by Human Spine

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

A Straight-Arch-straight Beam Tandem Quasi-Zero Stiffness Structure

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Limb-inspired bionic quasi-zero stiffness vibration isolator

A compact nonlinear stiffness-modulated structure for low-frequency vibration isolation under heavy loads

Nonlinear dynamic behavior of a bionic quasi-zero stiffness isolation system inspired by cobweb with the amplification effect

A Novel Multi-Layer Isolation Structure for Transverse Stabilization Inspired by Neck Structure

Integrated Design of Quasi-Zero-Stiffness Vibration Isolators Based on Bifurcation Theory

Nonlinear compensation method for quasi-zero stiffness vibration isolation

A Six Degrees-of-Freedom Vibration Isolation Platform Supported by a Hexapod of Quasi-Zero-Stiffness Struts

Dynamic characteristics of two degree-of-freedom quasi-zero stiffness vibration isolation system with nonlinear springs

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

Inverse-designed metastructures with customizable low dynamic stiffness characteristics for low-frequency vibration isolation

An innovative design of parabolic cam-roller quasi-zero-stiffness isolators for ultralow frequency vibration isolation

Low-frequency vibration isolation via new wide range zero-stiffness isolator with multiple negative stiffness mechanisms

The vibration isolation characteristics of torsion bar spring with negative stiffness structure