Abstract:Laser powder bed fusion (LPBF) enables the fabrication of geometrically customized lattice structures and opens new opportunities for the biomedical and mechanical engineering fields. However, due to the locally delicate architectures, the LPBF metallic lattices exhibit more complex processing characteristics compared to the regular manufacturing of solid cubes. In this study, LPBF printability maps of solid cubes and lattices for self-developed MgNdZn-Zr alloy (JDBM) are built by analyzing the surface morphologies and internal densification. The top surface morphology of the LPBF JDBM lattices exhibits a similar trend to that of the solid cubes under the varied processing parameters. However, the side surface morphology of the lattices is dominated by the staircase effect, demonstrating uneven transitions of struts with substantial powder particle adherence. Additionally, the inclined struts of JDBM lattices exhibit rougher down-facing surfaces with dross defects, which are induced by the gravity and capillary forces in the molten pool flow. In contrast, the LPBF JDBM lattices present a keyhole-shifted printability map with narrowed forming regime and enlarged keyholing regime as compared to the solid cubes. To clarify the mechanisms involved, multi-physics thermal-fluid flow simulations are conducted and reveal that a higher recoil pressure with the unconsolidated powder bed than that with the solid substrate causes a larger molten pool depth under identical processing parameters. This phenomenon further results in the keyholing dominance and subsequent deviation in the processing map of the LPBF lattice structures as compared to the solid cubes. This work demonstrates the need for tailored process parameters for lattice structures and shows how simulations can guide the design of process parameters for this endeavor.

Effects of Process Parameters and Design Parameters on the Mechanical Properties of 316l Diamond Lattice Structures Manufactured by Laser Powder Bed Fusion

Investigation on Mechanical Properties’ Anisotropy of Rod Units in Lattice Structures Fabricated by Selective Laser Melting

Effects of structure parameters on performances of laser powder bed fusion processed AlSi10Mg body-centered cubic lattices

Dimensional effect and mechanical performance of node-strengthened hybrid lattice structure fabricated by laser powder bed fusion

Build parameter influence on strut thickness and mechanical performance in additively manufactured titanium lattice structures

Effect of heat treatment on compression properties of the 316L diamond structure fabricated through selective laser melting

Mechanical Properties Evaluation Based on the Variable Gradient of Body-Centered-Cubic-Based Lattice Structure Prepared by Laser Powder Bed Fusion

Mechanical Properties and Deformation Behaviors of Node‐Reinforced Ti–6Al–4V Lattice Structures Manufactured by Laser Powder Bed Fusion

Compressive Properties of 316L Stainless Steel Topology‐Optimized Lattice Structures Fabricated by Selective Laser Melting

Effect of geometric defects on the mechanical properties of additive manufactured Ti6Al4V lattice structures

Improved mechanical properties and energy absorption of Ti6Al4V laser powder bed fusion lattice structures using curving lattice struts

Mechanical Characteristics of Superimposed 316L Lattice Structures under Static and Dynamic Loading

Mechanisms of processing map difference between laser powder bed fusion of Mg solid cubes and lattice structures

The Influence of Structural Design on the Dimensional Accuracy of CuCrZr Alloy Produced by Laser Powder Bed Fusion

Influence of the Processing Parameters on the Microstructure and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

Effects of the manufacturing process on the flexural properties of EBMed lattice structures

Mechanical properties and microstructural characteristics of 316L stainless steel fabricated by laser powder bed fusion and binder jetting

Thermal Behavior and Mechanical Properties of Different Lattice Structures Fabricated Using Selective Laser Melting

Effect of Laser Parameters on Microstructure and Mechanical Properties of Al-Ni-Sc-Zr Alloys Fabricated by Laser Powder Bed Fusion

The coupled effect of aspect ratio and strut micro-deformation mode on the mechanical properties of lattice structures

Compression Behavior of 316L Lattice Structures Produced by Indirect Additive Manufacturing