Abstract:A bimetallic catalytic membrane microreactor (CMMR) with bimetallic nanoparticles in membrane pores has been fabricated via flowing synthesis. The bimetallic nanoparticle is successfully immobilized in membrane pores along its thickness direction. Enhanced synergistic catalysis can be expected in this CMMR. As a concept-of-proof, Cu–Ag core–shell nanoparticles have been fabricated and immobilized in membrane pores for p-nitrophenol (p-NP) hydrogenation. Transmission electron microscopy (TEM) for the characterization of the bimetallic core–shell nanostructure and X-ray photoelectron spectroscopy (XPS) for the characterization of the electron transfer behavior between Cu–Ag bimetal have been performed. The Ag shell on the core of Cu can improve the utilization of Ag atoms, and electron transfer between bimetallic components can promote the formation of high electron density active sites as well as active hydrogen with strong reducing properties on the Ag surface. The dispersed membrane pore can prevent nanoparticle aggregation, and the contact between the reaction fluid and catalyst is enhanced. The enhanced mass transfer can be achieved by the plug-flow mode during the process of hydrogenation catalysis. The p-NP conversion rate being over 95% can be obtained under the condition of a membrane flux of 1.59 mL·cm–2·min–1. This Cu–Ag/PES CMMR has good stability and has a potential application in industry.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04155?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04155</a>.Schematic diagram of the preparation of Cu–MI/PES membrane; digital photographs of Cu–MI/PES, Cu/PES CMMR, Cu–Ag/PES CMMR, and the weight gains of the Cu–MI/PES membrane; ATR–FTIR pattern of Cu–MI and XRD pattern of Cu–MI and Cu nanoparticles; metal contents of the CMMR; elemental mapping image of the cross sections of the Cu–MI/PES membrane, Cu/PES CMMR, and Cu–Ag/PES CMMR; conversion rate and processing capacity of p-NP by Cu NPs, Cu/PES, and Cu–Ag/PES CMMR in the batch mode; ATR–FTIR pattern of the Ag–MI/PES membrane, Ag/PES CMMR, XRD pattern of Ag–MI/PES membrane, Ag/PES CMMR; pseudo-first-order plot of ln(Ct/C0) against reaction time for p-NP degradation over catalysts; and UV–vis spectra of p-NP on the upstream and downstream of the CMMR with different volume flux, conversion rate of p-NP by Cu/PES, Ag/PES, and Cu–Ag/PES CMMR (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04155/suppl_file/am1c04155_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

ZIF-Derived Co/Zn Bimetallic Catalytic Membrane with Abundant CNTs for Highly Efficient Reduction of P-Nitrophenol

Synthesis of ZIF-67 Derived Co-based Catalytic Membrane for Highly Efficient Reduction of P-Nitrophenol

Fabrication of Catalytic Ceramic Nanofiber Membrane with High Permeability and Superior Catalytic Performance

Multi-channel ceramic catalytic membrane for highly efficient and continuous hydrogenation of p -nitrophenol

Enhanced Catalytic Properties of Pd Nanoparticles by Their Deposition on ZnO-coated Ceramic Membranes

Flexible Hierarchical Pd/SiO2-TiO2 Nanofibrous Catalytic Membrane for Complete and Continuous Reduction of P-Nitrophenol

Cobalt-ferrite functionalized graphitic carbon nitride (CoFe2O4@g-C3N4) nanoconfined catalytic membrane for efficient water purification: Performance and mechanism

Insights into the Catalytic Performance of Multichannel Ceramic Catalytic Membrane in Liquid-Phase P-Nitrophenol Hydrogenation: Role of Storage Method

Multi-channel ceramic catalytic membrane microreactors for highly efficient heterogeneous catalysis

Nickel foam supported non-noble Co 3 O 4 as monolithic membrane catalyst for the reduction of p-nitrophenol

Catalytic membrane micro-reactor with nano Cu/ZIF-8 assembly in membrane pores by flowing synthesis combining partial ion-exchange

Encapsulation of Nano-Sized ZIF-67 Derived Co-NC on Au-loaded Halloysite As Composite Catalyst for Superior Cooperative Reduction of Nitroaromatic Pollutants

Catalytic Membrane Nanoreactor with Cu–Ag x Bimetallic Nanoparticles Immobilized in Membrane Pores for Enhanced Catalytic Performance

Integrated In Situ Fabrication of CuO Nanorod-Decorated Polymer Membranes for the Catalytic Flow-Through Reduction of p -Nitrophenol

Nanoconfined catalytic membranes assembled by cobalt-loaded carbon nanotubes and graphene oxide for highly efficient water decontamination

Fabrication of tubular braid reinforced PMIA nanofiber membrane with mussel-inspired Ag nanoparticles and its superior performance for the reduction of 4-nitrophenol.

High-efficiency Pd nanoparticles loaded porous organic polymers membrane catalytic reactors

Cu–Ag Bimetallic Core–shell Nanoparticles in Pores of a Membrane Microreactor for Enhanced Synergistic Catalysis

Pd Nanoparticles Decorated ZIFs/polymer Core-Shell Nanofibers Derived Hierarchically Porous N-doped Carbon for Efficient Catalytic Conversion of Phenol

Construction of cobalt nanoparticles decorated intertwined N-doped carbon nanotube clusters with dual active sites for highly effective 4-nitrophenol reduction

Catalytic membrane nano reactor with two-dimensional channels assembly of graphene oxide nanosheets with ZIF-67 derived Co3S4 catalyst immobilized on