Abstract:Particle systems are involved in a lot of engineering processes. Particle science and technology deal with the production, characterization, modification, handling, and utilization of a wide variety of particles, in both dry and wet conditions. In investigations of the behavior of dry particle systems, considerations of cost, time, and equipment may prohibit experimental works. Even in the absence of these constraints, successful experiments often yield only limited information. Computer simulation using the discrete element method (DEM) can provide more information and can be performed more quickly and at a lower cost than that of experiments. A DEM simulation requires that the interactive forces between simulated particles must be evaluated accurately as the driving factor of the motion behavior of particle systems. Therefore, to obtain reliable simulation results efficiently, it is necessary to develop simple and accurate particle-particle interactive force-displacement (FD) models. Most existing FD models, however, implement oversimplified versions of contact mechanics and do not correctly account for the plastic deformation near the contact point between particles, thus result in inaccurate simulation results. We present here the DEM simulation algorithms, the geometric modelling of nonspherical particles, and the development of a set of realistic and consistent particle-particle contact FD models that can correctly account for the effect of both the elastic and plastic deformation. The DEM simulations, implemented with the present elasto-plastic FD models, can correctly predict the motion behavior of particles. In the development of the present elasto-plastic FD models, we carried out a series of finite element analyses (FEA) of nonlinear elasto-plastic contact problems. The modelling and results of these FEA, including the dynamic FEA of elasto-plastic sphere collisions, are also presented in this dissertation. We implemented the present FD models into DEM software to carry out the simulations of experimental granular flows of nonspherical particles. Close agreement is observed between the experimental results and the results from DEM simulation on the boundary of the flow domain. Besides, additional information of the granular flow inside the flow domain, which cannot be obtained from traditional experiments, are obtained from the DEM simulation results.

A Modified Discrete Element Method for Concave Granular Materials Based on Energy-Conserving Contact Model

Three‐dimensional Discrete Element Simulation for Granular Materials

Discrete Element Modeling of Polyhedral Representation of Granular Materials

A Discrete Element Method with Spherical Harmonics for Irregular Granular Materials Based on the Level Set Contact Algorithm

General Polygon Mesh Discrete Element Method for Arbitrarily Shaped Particles and Complex Structures Based on an Energy-Conserving Contact Model

Discrete Element Method Simulations for Complex Granular Flows

DEM Contact Model for Spherical and Polyhedral Particles Based on Energy Conservation

A Discrete Element Method for Irregular Granular Materials Based on Multi-Dilated Polyhedron Elements

A Novel Discrete Element Method for Smooth Polyhedrons and Its Application to Modeling Flows of Concave‐Shaped Particles

Discrete element modeling and simulation of non-spherical particles using polyhedrons and super-ellipsoids

On Computer Simulation of Dry Particle Systems Using Discrete Element Method and the Development of Dem Contact Force-Displacement Models

Investigation of Modeling Non-Spherical Particles by Using Spherical Discrete Element Model with Rolling Friction

Linear-frictional contact model for 3D discrete element simulations of granular systems

Fourier series-based discrete element method for computational mechanics of irregular-shaped particles

A Unified Level Set Method for Simulating Mixed Granular Flows Involving Multiple Non-Spherical DEM Models in Complex Structures

A poly‐superellipsoid‐based approach on particle morphology for DEM modeling of granular media

A Unified Minkowski Sum Model for Largely Deformed Granular Materials with Arbitrary Morphologies

Discrete Element Methods for Characterizing the Elastic Behavior of the Granular Particles

Peridynamics-based discrete element method (PeriDEM) model of granular systems involving breakage of arbitrarily shaped particles

Scalable Three-Dimensional Hybrid Continuum-Discrete Multiscale Modeling of Granular Media

Modified Greenwood-Williamson model based stochastic discrete element method for contact with surface roughness